TomTom Go 16 4 User Manual

61 
 
 
 
5. To see more information about the POI, select the POI on the map and then select the pop-up 
menu button. Select More Information on the pop-up menu.  
 
You see more information about the POI such as the phone number, full address and email.  
6. To plan a route to this destination, select Drive/Ride depending on which device you are using. 
A route is planned and then guidance to your destination begins. As soon as you start driving, 
the guidance view is shown automatically. 
Tip: If your...

62 
 
 
 
A pop-up menu shows the nearest address. 
 
3. To plan a route to this destination, select Drive/Ride depending on which device you are using. 
A route is planned and then guidance to your destination begins. As soon as you start driving, 
the guidance view is shown automatically. 
Tip: You can use the location you selected in other ways, such as adding it to My Places, by 
selecting the pop-up menu button. 
 
Tip: If your destination is in a different time zone, you see a plus (+) or a minus...

63 
 
 
 
A list of all your Places opens. 
 
3. Select the Place you want to navigate to, for example Home. 
Your chosen Place is shown on the map with a pop-up menu. 
 
4. To plan a route to this destination, select Drive/Ride depending on which device you are using. 
A route is planned and then guidance to your destination begins. As soon as you start driving, 
the guidance view is shown automatically. 
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and...

64 
 
 
 
2. Select Search. 
 
The search screen opens with the keyboard showing. 
3. Select the type of search button to the right of the search box. 
 
4. Select Latitude Longitude. 
5. Type in your pair of coordinates. You can enter any of these coordinate types: 
 Decimal values, for example: 
N 51.51000      W 0.13454 
51.51000     -0.13454 
Tip: For decimal values you dont have to use a letter to indicate the latitude and longi-
tude. For locations west of the 0 meridian and locations south of the...

65 
 
 
 
Planning a route using a mapcode 
Important: In the interest of safety and to avoid distractions while you are driving, you should 
always plan a route before you start driving. 
To plan a route using a mapcode, do the following: 
1. Select the Main Menu button to open the Main Menu. 
 
2. Select Search. 
 
The search screen opens with the keyboard showing. 
3. Type in your mapcode. You can enter any of these mapcode types: 
 International, for example, WH6SL.TR10.  
 Country-specific, for...

66 
 
 
 
2. On the map view, select the route itself. 
3. Select the pop-up menu button to open the menu. 
4. Select Alternative Route and then select Find alternative. 
Up to three alternative routes are shown on the map view. Each alternative route shows the 
difference in travel time in a balloon. 
Tip: Information from the Lifetime Traffic service is used when calculating alternative routes. 
Any route that is 50% longer in time than the original route is not shown. 
 
5. Select your chosen route by...

67 
 
 
 
6. Select the pop-up menu button. 
A pop-up menu shows a list of options. 
 
7. Select Use as Starting Point. 
8. Repeat the search steps to choose your destination, and then select Drive/Ride in the pop-up 
menu. 
Your route is planned using your chosen starting point and destination. The estimated journey 
time is shown at the top of the route bar. 
Tip: Stops, POIs, Places and the destination can all be selected as starting points using their 
pop-up menus. 
Tip: You can save the route in My...

68 
 
 
 
2. Select the pop-up menu button. 
A pop-up menu shows a list of options.  
 
3. Select Change to a Stop. 
Your route is replanned with the starting point changed into a stop.  
Finding a car park 
Important: In the interest of safety and to avoid distractions while you are driving, you should 
always plan a route before you start driving. 
To find a car park, do the following: 
1. Select the Main Menu button to open the Main Menu.  
 
2. Select Parking. 
 
The map opens showing the locations...

69 
 
 
 
You can change the screen to show a list of car parks by pressing this button: 
 
You can select a car park from the list to locate it on the map. 
Tip: You can scroll down the list of results using the scroll bar on the right side of the screen. 
 
If you want to change how the search is done, select the button to the right of the search box. 
You can then change where the search is carried out, for example, to search near you or the 
whole map.  
 
3. Select a car park from the map or the...

70 
 
 
 
A route is planned and then guidance to your destination begins. As soon as you start driving, 
the guidance view is shown automatically. 
Tip: You can add a car park as a stop on your route by using the pop-up menu. 
 
Finding a petrol station 
Important: In the interest of safety and to avoid distractions while you are driving, you should 
always plan a route before you start driving. 
To find a petrol station, do the following: 
1. Select the Main Menu button to open the Main Menu.  
 
2....