TomTom Bridge 16 6 User Manual

 
101 
 
You can then set how you want to be warned for the different types of cameras and safety hazards. 
You can change settings for whether you want to be warned, never warned or warned only if you 
are speeding. 
For example, to change how you are warned when you approach a fixed speed camera, do the 
following: 
1. Select Sounds & Warnings in the Settings Menu. 
2. Select Cameras. 
3. Select Fixed cameras. 
4. Select one of the following warning options: 
 Always. 
 Only when speeding. 
 Never....

 
102 
 
Confirm or remove a mobile speed camera 
You can confirm the presence of a mobile speed camera or remove a mobile speed camera if it is no 
longer present. 
Just after you pass a mobile speed camera, in the route bar you are asked if the camera was still 
there. 
 Select Yes if the mobile speed camera is still there. 
 Select No if the mobile speed camera has been removed. 
Your selection is sent to TomTom. We collect reports from many users to determine if the camera 
warning should be kept...

 
103 
 
About danger zones and risk zones 
The Danger Zones service warns you about danger zones and risk zones on your route when you are 
in France. 
Since 3rd January 2012, it has been illegal to receive warnings about the position of fixed or mobile 
speed cameras when you are driving in France. To be compliant with this change in French law, 
speed camera locations are no longer reported but instead areas of danger are indicated as danger 
zones and risk zones. 
Important: Outside of France, you...

 
104 
 
Symbol shown on 
map 
Symbol shown in 
route bar 
Description 
   
Danger zone - this type of warning is only given in 
France. 
You are warned at the start and end of the danger 
zone. 
   
Risk zone - this type of warning is only given in 
France. 
You are warned at the start and end of the risk 
zone. 
You can change the way you are warned about danger and risk zones.  
Changing the way you are warned 
To change the way you are warned about danger zones, select the Sounds and Warnings button...

 
105 
 
Tip: If you make a mistake when reporting a risk zone, select Cancel in the message. 
The risk zone is saved on your device automatically and also sent to other users. A reported risk 
zone stays on your device for three hours. 
 
Using the Main Menu to report a risk zone 
1. Select the Main Menu button to open the Main Menu. 
 
2. Select Report Risk Zone. 
 
You see a message thanking you for adding the risk zone. 
Tip: If you make a mistake when reporting a risk zone, select Cancel in the...

 
106 
 
About My Places 
My Places provides an easy way to select a location without the need to search for the location each 
time. You can use My Places to create a collection of useful or favourite addresses. 
Tip: The terms favourite and place mean the same thing - favourites are places that you go to 
often. 
The following items are always in My Places: 
 Home - Your home location can be your home address or somewhere you often visit. This 
feature provides an easy way to navigate there. 
 Work -...

 
107 
 
 Select the Search button and search for a location. Select a location to set as home or work. 
Select Set home location or Set work location. 
Setting your home or work location using the map 
1. In the Map View, move the map and zoom in until you can see your home or work location. 
2. Select the location by pressing and holding the screen for about one second. 
A pop-up menu shows the nearest address. 
1. Open the pop-up menu and select Add to My Places. 
2. In the name bar, enter the name...

 
108 
 
Note: Home must have a capital letter H. 
3. Select Add. 
Your home location is changed to the new location.  
Adding a location from My Places 
1. In the Main Menu, select My Places. 
2. Select Add a new place. 
3. To select a location, do one of the following: 
 Zoom in on the map at the location you want to select. Press and hold to select the loca-
tion, then select the add location symbol. 
 Search for a location. Select Show on Map, then select the add location symbol. 
 
The name of the...

 
109 
 
4. When the map view shows the location, select the pop-up menu button. 
 
5. Select Add to My Places. 
The name of the location appears in the edit screen. 
6. Edit the name of the location so you can easily recognise it. 
7. Select Done to save your location in the My Places list.  
Adding a location to My Places by marking 
To mark a location and temporarily add it to My Places, do the following: 
1. Make sure that your current location is the location you want to mark. 
2. Select the current...

 
110 
 
Note: Use ONLY the USB cable supplied with your device. Other USB cables may not work.  
Note: You cannot use the mount to connect your device to your computer. 
Note: You should plug the USB cable directly into a USB port on your computer and not into a 
USB hub or USB port on a keyboard or monitor. 
2. On your computer, open a file manager program. 
Your device appears in your computers files system as TomTom Bridge. 
3. Open your devices Internal Storage folder, then open the Locations...