TomTom 60 S Manual

81 
 
 
 
Saying commands in different ways 
Your GO recognizes many more words than just the ones you see in the list of commands, so try 
some of your own words. You can say other words that have the same meaning, for example you can 
say the following words: 
 OK, Correct or Right instead of Yes when you want to confirm what you said. 
 Navigate to, Look for or Nearest instead of Drive to when you want to drive to a gas 
station. 
 Cancel or Delete instead of Clear when you want to clear your...

82 
 
 
 
Going home using voice control 
The following example shows how to use voice control to plan a trip to your home location: 
1. In map view or guidance view, say the wake-up phrase to start voice control. 
The voice control screen is shown and your GO says Im listening. When voice control is ready 
to listen, you see a microphone icon in the bottom left corner and you hear a beep. 
 
2. Say the command Drive home. 
Tip: Say All commands to see a list of commands you can say. Alternatively,...

83 
 
 
 
Tip: Say All commands to see a list of commands you can say. Alternatively, select Help in 
the Main menu, then select Voice control and then select Which commands can I say?. 
For some commands, your GO repeats what you say and asks for confirmation. 
3. If the command is correct, say Yes. 
If the command is incorrect, say No and repeat the command after you hear Im listening. 
The volume on your GO changes to 50%. 
Tip: To stop voice control, say Cancel. To go back one step, say Back.  

84 
 
 
 
About Map Share 
You can report map changes using Map Share. These map changes are then shared with other 
TomTom users when they receive a map update. 
There are two ways to report a map change: 
 Select a location on the map and create the change report immediately. 
 Mark a location and create the change report later. 
Your map change reports are automatically sent to TomTom in real time or when you connect your 
device to MyDrive Connect using a USB connection. 
Tip: If you have a...

85 
 
 
 
Note: If you want to report a map change of a type not shown in the menu, use the Map Share 
Reporter at tomtom.com. 
 
5. Follow the instructions for your chosen type of map change. 
6. Select Report. 
Your map change report is sent to TomTom in real time or when you connect your device to 
MyDrive Connect using a USB connection. You receive map changes from other TomTom users as 
part of map updates. 
Tip: If you have a smartphone-connected device, reports are sent when your device is con-...

86 
 
 
 
3. In the Main Menu, select My Places. 
4. Open the Marked locations folder and select the marked location. 
The marked location is shown on the map. 
5. Select Report Map Error from the pop-up menu. 
6. Select the type of map change you want to apply. 
Note: If you want to report a map change of a type not shown in the menu, use the Map Share 
Reporter at tomtom.com. 
7. Follow the instructions for your chosen type of map change. 
8. Select Report. 
The marker for the marked location is...

87 
 
 
 
Select the road sign at either end of the road to change it from open to closed or vice versa. 
 
5. Select Report. 
Street Name 
Select this option to correct an incorrect street name. 
1. Press and hold to select the location of the map change on the map view. 
2. Select the pop-up menu button to open the menu. 
3. Select Report Map Error from the pop-up menu. 
4. Select Street Name. 
5. Enter the correct street name. 
6. Select Report. 
Turn Restriction 
Select this option to report...

88 
 
 
 
7. Select the traffic signs in turn to change the turn restrictions for each road at the crossing. 
 
8. Select Report. 
Speed Limit 
Select this option to correct the speed limit on the map.  
1. Press and hold to select the location of the map change on the map view. 
2. Select the pop-up menu button to open the menu. 
3. Select Report Map Error from the pop-up menu. 
4. Select Speed Limit. 
5. Select the correct speed limit.  
If the correct limit is not shown, scroll left or right through...

89 
 
 
 
About safety cameras 
The Safety Cameras service warns you about the following camera locations: 
 Fixed safety camera locations. 
 Speed trap locations. 
 Speed trap hotspots. 
 Average safety camera locations. 
 Speed enforcement zones. 
 Red light camera locations. 
 Traffic restriction cameras. 
The Safety Cameras service also warns you about the following safety hazards: 
 Accident blackspot locations. 
 Traffic jams. 
To get TomTom services on your GO, you must be connected to...

90 
 
 
 
Symbol shown on 
map 
Symbol shown in 
route bar 
Description 
   
Speed trap - this type of camera checks the 
speed of passing vehicles and can be moved to 
different locations. 
   
Speed trap hotspots - this type of warning shows 
places where speed traps are often used. 
   
Average speed safety cameras - these types of 
cameras measure your average speed between 
two points. You are warned at the start and end 
of the average speed zone. 
While you are driving in an average speed zone,...