TomTom 60 S Manual

91 
 
 
 
Changing the way you are warned 
To change the way you are warned about safety cameras, select the Sounds and Warnings button in 
the Settings menu. 
 
You can then set how you want to be warned for the different types of cameras and safety hazards. 
You can change settings for whether you want to be warned, never warned or warned only if you 
are speeding. 
For example, to change how you are warned when you approach a safety camera, do the following: 
1. Select Sounds and Warnings in the...

92 
 
 
 
2. Select Report Safety Camera. 
 
You see a message thanking you for adding the camera. 
Tip: If you make a mistake when reporting a camera, select Cancel in the message. 
The safety camera is saved on your GO automatically and also sent to other users.  
Confirm or remove a speed trap 
You can confirm the presence of a speed trap or remove a speed trap if it is no longer present. 
1. Just after you pass a speed trap, in the route bar you are asked if the camera was still there. 
2. Select Yes...

93 
 
 
 
About My Places 
My Places provides an easy way to select a location without the need to search for the location each 
time. You can use My Places to create a collection of useful or favorite addresses. 
Tip: The terms favorite and place mean the same thing - favorites are places that you go to 
often. 
The following items are always in My Places: 
 Home - Your home location can be your home address or somewhere you often visit. This 
feature provides an easy way to navigate there. 
 Work -...

94 
 
 
 
 Zoom in on the map at the location you want to select. Press and hold to select the loca-
tion, then select the home or work location symbol. 
 
 Select the Search button and search for a location. Select a location to set as home or work. 
Select Set home location or Set work location. 
Setting your home or work location using the map 
1. In the Map View, move the map and zoom in until you can see your home or work location. 
2. Select the location by pressing and holding the screen for...

95 
 
 
 
Changing your home location using the map 
1. In the Map View, move the map and zoom in until you can see your new home location. 
2. Select the location by pressing and holding the screen for about one second. 
A pop-up menu shows the nearest address. 
1. Open the pop-up menu and select Add to My Places. 
2. In the name bar, enter the name Home. 
Note: Home must have a capital letter H. 
3. Select Add. 
Your home location is changed to the new location.  
Adding a location from My Places 
1....

96 
 
 
 
6. Select Done to save your location in the My Places list. 
The location you added is shown with a marker on the map.  
Adding a location to My Places using search 
1. In the Main Menu, select Search. 
2. Search for a location. 
3. Select the location then select Show on map. 
4. When the map view shows the location, select the pop-up menu button. 
 
5. Select Add to My Places. 
The name of the location appears in the edit screen. 
6. Edit the name of the location so you can easily recognize...

97 
 
 
 
Appearance 
Select Settings in the Main Menu, then select Appearance. 
 
On this screen, you can change these settings: 
 Display 
Select Display to change the appearance of the display. 
 Route bar 
Select Route bar to change the information you see in the route bar. 
 Guidance view 
Select Guidance view to change the information you see in the guidance view. 
 Automatic zoom 
Select Automatic Zoom to change how you view a crossing as you drive. 
 Automatic map view switching 
By default,...

98 
 
 
 
Size of text and buttons 
Select Size of text and buttons to change the size of the text and the buttons you see on the 
screen. 
Note: This feature is only available on devices with a 6 inch / 15 cm or larger screen. 
Drag the slider to change the text and button size to small, medium or large, then select Apply this 
change. Your GO restarts and applies the change.  
Route Bar 
Select Settings in the Main Menu, then select Appearance.  
 
Select Arrival information to change the arrival...

99 
 
 
 
 
Arrival information 
Select Arrival information to change the following settings: 
 Show remaining distance 
Select this setting to show the remaining distance left to travel in the arrival information panel 
during navigation.  
 Show remaining time 
Select this setting to show the remaining time left to travel in the arrival information panel 
during navigation.  
 Switch between distance and time automatically 
Select this setting to control the automatic switching between remaining...

100 
 
 
 
Select Automatic zoom to change settings for the automatic zoom in Guidance view when you 
approach a turn or a junction. Zooming in can make the turn or junction easier to drive. 
 Zoom in to next turn 
All the turns and junctions on your route are shown zoomed in to the maximum level. 
 Based on road type 
The turns and junctions on your route are shown zoomed in to the standard level for the type of 
road you are on.  
 None 
None of the turns and junctions on your route are shown zoomed...