Timex Ironman 30Lap Digital Analog Combo User Manual

W223 EU2 2220\b5001402 

                  \U      English    pa\be 2
              Franç\Uais    pa\be 54
         \federlands\U    pa\bina 112
                It\Ualiano    pa\bina 166 

TIMEX®WATCHES
Congratulations on purchasing your TIMEX®watch. Please read these instructions carefully to
 understand how to operate your Timex timepiece.
Your watch may not have all of the features
described in this booklet.
For more information, please visit: Timex.com 

          TABLE OF CONTENTS      2      How to Start Your Watch
      3      Water and Shock Resistance
      \b      Indiglo
®NightLight
      5      Analog\fDigital Models
    1\f      MultiFunction Models
    20      Day\fDate\fAM\fPM\fSun\fMoon Models
    22      Chronograph Models
    39      Elapsed Time Ring
    \b0      Tachymeter Ring
    \b1      Compass Ring
    \b2      How to Adjust Bracelet
    \b\b      Bracelet Link Removal
    \b5      Battery
    \b6      Warranty
E N G L I S H 

WATER AND SHOCK RESISTANCEIf your watch is waterresistant, meter marking
(WR_M) is indicated.
*pounds per square inch absolute
WARNING: TO MAINTAIN WATERRESISTANCE,
DO NOT PRESS ANY BUTTONS OR PULL OUT 
THE CROWN UNDER WATER UNLESS YOUR
WATCH IS INDICATED AS 200 METER WATER
RESISTANT.
1.   Watch is waterresistant only as long as crystal, crown and case remain intact.
3
E N G L I S H
HOW TO START YOUR WATCHTo start your watch remove the plastic guard from
under the crown, then press the crown in against...

ANALOG\bDIGITAL MODELS
4PUSHER ANALOG\bDIGITAL MODEL WITH
INDIGLO®NIGHTLIGHT & NIGHTMODE®FEATURE
5
E N G L I S H
2.   Watch is not a diver watch and should not beused for diving.
3.   Rinse watch with fresh water after exposure to salt water.
4.   Shockresistance will be indicated on the watch face or caseback. Watches are designed to pass
ISO test for shockresistance. However, care
should be taken to avoid damaging the crystal.
INDIGLO®NIGHTLIGHTPress button or crown to activate light. Patented 
(U.S....

DIGITAL DISPLAY1)   The Digital display changes to each function everytime you PRESS pusher “A”. (As illustrated below):
     TIME \f CALENDAR
     DAILY ALARM
     COUNTDOWN TIMER
     CHRONOGRAPH
     DUAL TIME
7
E N G L I S H
TO USE INDIGLO®NIGHTLIGHT1)   PRESS pusher “B” to illuminate the entire dial (Both analog and digital).
TO USE NIGHTMODE®FEATURE1)   PRESS and HOLD pusher “B” for 3 seconds untilyou hear a beep.
2)   Pressing any pusher will cause the INDIGLO
®nightlight to illuminate and stay on...

•    To view or change the display to TIME, repeat the
steps above.
     NOTE: “A” or “P” will appear when the 12Hour
format is selected.
•     Set this time to coordinate with the Analog time
or another time zone.
•     PRESS and HOLD pusher “C” for 2 seconds in 
setting mode, to activate fast advance.
9
E N G L I S H
TO SET TIME \b CALENDAR1)   PRESS pusher “A” to bring up TIME \f CALENDAR display.
2)   PRESS and HOLD pusher “D”. HOLD will display until second flashes.
3)   PRESS pusher “C” to reset to...

     NOTE:
•     When the alarm sounds, it will beep for 20 
seconds.
•     To stop the alarm beep, PRESS any pusher.
•     PRESS and HOLD pusher “C” for 2 seconds in
setting mode, to activate fast advance.
11
E N G L I S H
TO SET DAILY ALARM1)   PRESS pusher “A” to bring up DAILY ALARM dis play: “ALARM” will appear for 3 seconds followed
by the current alarm setting time and time zone.
The ALARM mode symbol “AL” and the applicable
time zone symbol “T1” or “T2” alternate to give
complete information.
2)...

TO USE COUNTDOWN TIMER
1) PRESS pusher “A” to bring up COUNTDOWN TIMERdisplay. “24 HR TR” will appear.
2) PRESS pusher “D” to let hour flash.
3) PRESS pusher “C” to advance hour.
4) PRESS pusher “A” to set tens of minutes.
5) PRESS pusher “C” to advance tens of minutes.
6) PRESS pusher “A” and “C” as above to adjust minute.
7) PRESS pusher “D” to complete setting.
8) PRESS pusher “C” to start the timer.
9) PRESS pusher “D” to stop the timer.
10) PRESS pusher “D” again to resume timer to the preset time....