Home > TiE > Communications System > TiE Businesscom Plus 24/36/64 Installation Manual

TiE Businesscom Plus 24/36/64 Installation Manual

    Download as PDF Print this page Share this page

    Have a look at the manual TiE Businesscom Plus 24/36/64 Installation Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 13 TiE manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Feature Interactions:
    CO Lines
    Direct Station Selection (DSS) Console
    Do Not Disturb (DND)
    Handsfree Reply On Intercom
    Intercom
    CALLBACK
    Description:
    This feature permits a station to receive a signal tone when
    a previously called busy station resumes an idle condition. If
    the caller seizes the Intercom link after the signal tone, the
    idle station is automatically called.
    Conditions:
    (a) The link must be seized within 20 seconds after the
    initiation of the Callback signal or the recall is dropped.
    (b) Camp-On requests have priority over Callback requests.
    (c) Callback cannot be used if the automatic mode of
    Intercom Call Waiting is programmed.
    Basic Programming: None
    Related Programming: None
    Feature Interactions:
    Call Waiting Intercom
    Camp-On
    Intercom
    CAMP-ON
    Description:
    This feature permits a calling station to wait off-hook for a
    busy station to resume an idle condition. At this point the idle
    station is automatically recalled.
    Conditions:
    Camp-On is unavailable if the automatic mode of
    Intercom Call Waiting is programmed.
    Program 49 (Excluded System Features) can disable this
    feature.
    Camp-On requests have priority over Callback requests.
    Camp-On utilizes an Intercom link when in use.
    Basic Programming: None
    Related Programming:
    Program 49-Excluded System Features
    Feature Interactions:
    Call Waiting Intercom
    Intercom
    CO 
    LINES
    Description:
    This feature permits the formation of CO line groups with the
    option of outgoing and/or incoming access and incoming
    audible assignment. Lines can be grouped and identified as
    follows:
    Conditions:
    Thirty groups are permitted.
    Each group can contain as many consecutive lines as
    required.
    Each line can be programmed for either Dial Pulse or
    DTMF signaling.
    Stations assigned line groups with day audible receive
    audible when Night Transfer is not activated. Stations 
    assigned line groups with night audible receive audible
    when Night Transfer is activated.
     CO line groups providing incoming access are
    assignable on a per station basis.
     CO line groups providing outgoing access are
    assignable on a per station basis.
    Class of Service and Night Class of Service can be used
    to prohibit or limit outgoing access.
    Audible tone rate is programmable.
    Basic Programming:
    Program l-Line  Dial Mode, CO Queueing Group
    Program 2-CO Line Group Assignments
    Related Programming:
    Program 6-CO Line Outward Access Assignment
    Program 7-CO Line Incoming/Audible Assignment
    Program 
     
    Program  Audible Rate Assignment
    Program 
     Audible Rate Assignment Timer 
    						
    							Feature Interactions:
    Night Class of Service
    Night Transfer
    Toll Restriction
    COMMON USE LINE
    Description:
    This feature permits a CO line to be accessible by any station
    but subject to that station’s Class of Service. It allows both
    incoming and outgoing access.
    Conditions:
    (a) Any line can be used as a Common Use Line.
    (b) Access to a Common Use Line can be limited by
    telephone instrument type.
    (c) Common Use Lines are unavailable when Flexible Line
    Appearance is programmed.
    Basic Programming:
    Program 3-Common Use Line
    Related Programming: None
    Feature Interactions:
    Flexible Line Appearance
    COMPONENT COMMONALITY
    Description:
    This feature permits the use of different system components
    in a single system (e.g., any telephone in the Businesscorn
    Plus Family can be used in any Businesscorn Plus System).
    Conditions:
    If there are more lines assigned to a telephone than line
    keys available to accommodate them, a phantom ring can
    occur For example, if line five has an incoming call and
    a Businesscorn Plus 3 Line telephone is programmed
    incoming access and audible for that line, the callrings
    in but no line key  The call can still be
    answered by lifting the handset or pressing the SPK key
    provided that Ringing Line Preference is programmed.
    A station can queue for a CO line that it has access to,
    but no line appearance for, if Recall Line Preference
    (Program 47) is programmed.
    Basic Programming: None
    Related Programming:
    Program  Line Appearance
    Program 
     Line Preference
    Program 47-Recall Line Preference
    Feature Interactions:
    Flexible Line Appearance
    Line Queueing
    Recall Line Preference
    Ringing Line Preference
     Flexible Line Appearance is a feature that “‘shifts” lines to
    different line keys. See Flexible Line Appearance for further
    explanation.
    CONFERENCE, ADD-ON
    Description:
    This feature permits internal parties to Conference with each
    other.
    Conditions:
    (a) Six internal parties can enter the Conference.
    (b) Program 49 (Excluded System Features) can disable this
    feature.
    Basic Programming: None
    Related Programming:
    Program 49  Excluded System Features
    Feature Interactions:
    Intercom
    CONFERENCE, MEET-ME
    Description:
    This feature permits selected stations to Conference with a
    Paging station.
    Conditions:
    (a) Five stations can Conference with the page initiator.
    (b) The initiating station can use Internal Zone Paging or
    All Call Paging to initiate this feature.
    2-6 
    						
    							(c) If Internal Zone Paging is used, only those stations
    granted assignment to that Paging group are allowed to
    Conference.
    (d) Only those stations programmed assignment to a Paging
    group are permitted to join in a Meet-Me Conference,
    regardless of the Paging feature used to initiate the
    Conference.
    (e) Program 49 (Excluded System Features) can disable this
    feature.
    (f)When Meet-Me Conference is initiated, the zone is made
    unavailable to others in the system for a period of 30
    seconds or until five stations enter the Conference.
    Basic Programming:
    Program  Groups
    Related Programming:
    Program 49-Excluded System Features
    Feature Interactions:
    Paging, All Call
    Paging, Internal Zone
    CONFERENCE, MULTI-LINE
    Description:
    This feature permits internal parties to Conference with more
    than one external party.
    Conditions:
    Six internal parties can Conference with two external
    parties.
    Stations programmed for Executive Override can enter
    a Multi-Line Conference uninvited provided that the total
    number of stations in the Conference does not exceed
    six.
    Basic Programming:
    Program 30-Multi-Line Conference
    Related Programming: None
    Feature Interactions:
    CO Lines
    Executive Override (Barge In)
    Intercom
    CONFERENCE, UNSUPERVISED 
    Description:
    This feature permits an internal party to establish a
    Conference between external parties wherein the Conference
    is maintained after the initiating party hangs up.
    Conditions:
     external parties can engage in Unsupervised
    Conference.
    Multi-Line Conference and Release of Abandoned Calls
    on Hold must be programmed for Unsupervised
    Conference to function.
    The following station ports must be available, i.e., station
    card installed, but unterminated:
    SystemPort
    24 18
    3622
    64
    34
    Lines used for Unsupervised Conference must utilize
    open loop disconnect supervision,
    The Conference initiating party can reenter the
    Conference.
    A 600 OHM resistor must be connected across the
    unsupervised station position. See Section 5, INSTALL
     (Station Cabling and System Connections) for
    more information.
    Basic Programming:
    Program &Unsupervised Conference
    Program 30-Multi-Line Conference
    Program 54-Release of Abandoned Calls on Hold
    Related Programming: None
    Feature Interactions:
    CO Lines
    Conference, Multi-Line
    Release of Abandoned Calls On Hold 
    						
    All TiE manuals Comments (0)

    Related Manuals for TiE Businesscom Plus 24/36/64 Installation Manual