THOMSON Dpl930vd User Manual

							DPL930VD
user
manual
It is important to read this instruction book prior to using your new pr\
oduct for the first time.
DPL2930
 
						

							Safety Information
Thomson Information
CAUTION!
Invisible laser radiation when open. Avoid exposure to
beam. Class 1 laser product. This system must be opened
only by qualified technicians to prevent accidents caused
by the laser beam.
LASERh= 780 nm, P max = 5 mW
Rating Information: At bottom of the unit
this unit comply with the existing requirements
In accordance with the rating plate of the
unit, this unit complies with current 
standards concerning electrical safety and
electromagnetic compatibility.
Please respect the environment Before
throwing any batteries away, consult your
distributor who may be able to take them
back for specific recycling.
Have a Blast- Just Not in Your Eardrums
Make sure you turn down the volume on
the unit before you put on headphones.
Increase the volume to the desired level
only after headphone are in place.
ADVARSEL!
USYNLIG LASERSTRÅLNING VED ÅBNING NAR
SIKKERHEDSAFBRYDERE ER  UDE AF  FUNKTION.
 UNGDÅ UDSAETTELSE FOR STRÅLNING.
VORSICHT!
UNSICHTBARE LASERSTRALUNG
WENN ABDECKUNG GEÖFFNET UND SICHERHEITS–
VERRIEGELUNG ÜBERBRÜCKT.
NICHT DEM LASERSTRAHL AUSSETZEN!
CLASS 1 LASER PRODUCTLASER KLASSE 1
APPAREIL
A LASER DE  CLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPP ARAT
CAUTION –  INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS FAILED OR
DEFEATED.  AVOID EXPOSURE TO BEAM.
ATTENTION–
RAYONNEMENT LASER INVISIBLEDANGEREUX EN CAS D'OUVERTURE ET LORSQUE
LA SECURITE EST NEUTRALISEE.
EXPOSITION DANGEREUSE AU FAISCEAU.
VARNING–
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD OCH SPÄRRAN ÄR URKOPPLADE.
BETRAKTA EJ STRÅLEN.
VARO!
AVATTAESSA JA  SOUJALUKITUS OHITETT
AESSAOLET ALTTIINA NÄKYMÄTTÖMÄLLE.LASERSÄTEILYLLE ÄLÄ KATSO SÄTEESEEN.
For UK Only
CONNECT THE MAIN LEAD INTO AC MAINS POWER 
SOCKET
POWER SUPPLY 230V.  It must not be connected to D.C.
mains.
Note;  The mains lead of the set is fitted with a molded
plug.  If the mains socket are not compatible or if for any
reason the plug is removed please follow the directions
below.  The molded plug cannot be rewired and if
removed must be disposed of safely.
DO NOT under any circumstances plug the severed plug
into any mains socket as this could result in electric shock.
Important:  If the plug is removed, rewire the new plug
as follow:
The wires in the mains plug are coloured in accordance
to the following code:
BLUE = NEUTRAL/BROWN = LIVEIf the colours of the wires in the mains lead of this 
apparatus may not correspond with the coloured 
markings identifying the terminals in your plug, proceed
as follows:
BLUEwire to the terminal coded N (Neutral) or coloured
black.
BROWNwire to the terminal coded L (Live) or coloured
red.
DO NOT
make any connection to the 
terminal in the plug which is marked by
the letter E or by the earth symbol or
coloured green or green and yellow.
A fused plug must be fitted with a 13A fuse approved by
ASTA or BS1362 and fuse covers must be always be
securely replaced.  If you set does not work, the fuse may
be blown.
WARNING:TO PREVENT FIREOR ELECTRICAL
 SHOCK HAZARD,DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
CAUTIONRISK OF ELECTRIC SHOCK
            DO NOT OPEN
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS  A
WARNING       SIGN
ALERTING YOU    OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT. THE LIGHTNING
FLASH AND ARROW-
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
DANGEROUS
VOLTAGE INSIDE
THE PRODUCT.CAUTION: TO  REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER
(OR BACK). NO USER-
SERVICEABLE PARTS IN-
SIDE. REFER SERVICING
TO QUALIFIED SERVICE 
PERSONNEL.
13A
This product incorporates copyright pro-
tection technology that is protected by
method claims of certain U.S. patents
and other international property rights
owned by Macrovision Corporation and
other rights owners. Use of this copy-
right protection technology must be authorized by
Macrovision Corporation, and is intended for home
use only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
 
						

							EN
1
Safety Information
Getting Started
Unpacking the DVD Receiver   . . . . . . . . .2
Unpacking the Speakers   . . . . . . . . . . . . .2
Inserting Batteries into Remote Control  .3
Set Up and Maintenance of the 
Receiver  . . . . . . . . . . . . . . . . . . . . . . . . . .3
Protect your Components from 
Overheating . . . . . . . . . . . . . . . . . . . . . . .3
Disc Information  . . . . . . . . . . . . . . . . . . .3
Connecting to Audio-Visual 
Components  . . . . . . . . . . . . . . . . . . . . . .4
Connecting Antennas  . . . . . . . . . . . . . . .4
Connecting the Speakers  . . . . . . . . . . . . .5
Wireless Speaker Connection  . . . . . . . . .6
Wireless Signal Transmitter  . . . . . . . . . . .6
Wireless Signal Receiver  . . . . . . . . . . . . .6
Connecting Procedures  . . . . . . . . . . . . . .6
Changing the Channel Frenquency  . . . . .6
Positioning your Speaker . . . . . . . . . . . . .7
Front Speaker Placement . . . . . . . . . . . . .7
Advanced Setting  . . . . . . . . . . . . . . . . . .7
Preferred Surround Placement  . . . . . . . .8
Advanced Setting  . . . . . . . . . . . . . . . . . .8
Test Tone / Channel Balance  . . . . . . . . . .9
Factory Setting . . . . . . . . . . . . . . . . . . . . .9
Operating your Receiver
Receiver Controls  . . . . . . . . . . . . . . . . . .10
Remote Control  . . . . . . . . . . . . . . . . . . .11
Display  . . . . . . . . . . . . . . . . . . . . . . . . . .12
Switching On/Off  . . . . . . . . . . . . . . . . . .13
Selection of Audio Source  . . . . . . . . . . .13
Connection of Audio Source  . . . . . . . . .14
Advanced Sound Control
Sound Enhancement Systems  . . . . . . . .15
Fine Setting of Components  . . . . . . . . .16
Fine Setting of the Speakers  . . . . . . . . .17
Speaker icons  . . . . . . . . . . . . . . . . . . . . .18
DVD Player
Basic Playback Features  . . . . . . . . . . . . .19
Quick Search  . . . . . . . . . . . . . . . . . . . . .19
Time Search  . . . . . . . . . . . . . . . . . . . . . .19
Freeze Frame and Frame Advance  . . . .19
Slow Motion Playback (DVD only)  . . . . .20
On-Screen Banner Display  . . . . . . . .20-24
Setup Menu  . . . . . . . . . . . . . . . . . . . . . .25
CD / mp3 Player
mp3 Recommendations  . . . . . . . . . . . . .30
Loading and Playing an Audio CD   . . . .30
Quick Scan   . . . . . . . . . . . . . . . . . . . . . .31
On-Screen Banner Display for CD 
Playback  . . . . . . . . . . . . . . . . . . . . . .32-34
On-Screen Display for mp3 playback
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-36
JPEG CD
On-Screen Display for JPEG CD  . . . . . . .37
DivX
On-Screen Display for DivX  . . . . . . . . . .38
To rent (purchase) DivX VOD files  . . . . . .39
Radio
Operating the Radio  . . . . . . . . . . . . .40-41
Troubleshooting Tips. . . . . . . .42-43
Care and Maintenance. . . . . . . . .44
Table of Content
 
						

							Getting Started
Unpacking the DVD Receiver
You should receive the following items:
2
PHONES
+         -
+         -
One DVD receiver unitOne pair of “AAA” 
batteries
One Pig-Tail 
antenna wireone video cable (single wire)
with yellow connectors
PR
AV
SUBWOOFER
EQ. LEVEL SURROUND
REC
•  one instruction book;
•  one safety leaflet;
•  one Quick Connection GuideOne Remote Control
(RCT311AC1)
Unpacking The Speakers 
• one set of speakers including 1 set of left and right front
speakers, 1 centre speaker, 1 subwoofer, 1 wireless signal
receiverand 1 set of left and right rear speakers.
1 X green/grey stripped wire for center speaker
1 X red/grey stripped wire for front right speaker
1 X white/grey stripped wire for front left speaker
1 X purple/grey stripped wire for subwoofer
1 X blue/grey stripped wire for rear left speaker
1 X grey/grey stripped wire for rear right speaker
STANDBY
 
						

							Getting Started
Inserting Batteries into Remote Control 
Insert two “AAA” batteries according to the + and - signs
on the battery compartment. To use the remote control,
point it directly at your receiver.
Set up and Maintenance of the Receiver
IMPORTANT NOTE
• Provide spaces for sufficient ventilation as indicated
below.  If the space is insufficient, the unit may overheat
resulting in malfunction and shorter life time.
• Do not connect to the AC power cords until  all connec-
tions are completed. 
• Do not use your set immediately after transferring it from
a cold place to a warm place:  there is risk of condensation.
• Do not expose your set to water and excessively high
temperatures.
•  After having disconnected your set, clean the case with a
soft cloth, or with a slightly damp leather chamois. Never
use strong solvents.
Disc handling precaution:
• Do not touch the recorded surface.
• Do not use record cleaning sprays, solvent or anti-static
liquid.
• If the disc is dirty, clean it with a damp cloth and wipe
from the center out. Wipe in straight line and not in circu-
lar motion.
• Do not attach stickers, label on the disc.
• Store the disc in its case after playing.
Regional coding
Your DVD player has been designed to process regional
management information that is stored on DVD. DVD that
have different regional codes to that of your player cannot
be played. The regional code for your player is 2. All means
all regions. When you buy a disc, check that it bears the
correct logo.
Protect your Components from
Overheating
• Do not block ventilation holes in any component.
Arrange the components so that air can circulate freely.
• Do not stack components directly on top of each other.
•  Allow adequate ventilation when placing your compo-
nents in a stand.
•  Place the receiver near the top shelf of the stand so
heated air rising from it will not affect other components.
Disc you can play
While advances have been made to ensure that your player
is compatible with the largest number of discs possible, it
cannot be guaranteed that you will be able to play discs
which might not be compatible with audio CD, VCD and
SVCD standards. In the case of writable and rewritable
discs, compatibility with this player depends on the DVD
writer, the write software and the disc used.
DVD video - Digital video discs - 12 cm and 8 cm, single or dou-
bled sided, single or dual layer. DVDs are high-density optical discs
on which high quality picture and audio are recorded by means of
digital signals.
DVD-R, DVD-RW, DVD+R, DVD+RW - Most DVD-R and DVD+R
(one recording only), DVD-RW and DVD+RW discs (rewritable).
Depending on the DVD writer and discs used. Recordings using
DVD-R and DVD+RW discs must be made in Video DVD mode.
Recordings using DVD+RW discs must be made in accordance with
the specifications for DVD+RW discs with a 4.7 GB capacity.
VCD, Video Compact Disc - CD on which you can record up to 74
minutes of VHS-quality video associated with still images, audio
tracks and interactive menu.
SVCD, Super Video Compact Disc - Most SVCDs comply with the
IEC62107 standards. SVCDs can be used to record up to 70 min-
utes of digital sound and images in accordance with MPEG-2 stan-
dards for video and MPEG-1 standards for audio.
Audio CDs - Audio CDs (8 and 12cm)
CD-R, CD-RW - Most CD-R (one recording only) and CD-RW
discs (rewritable). This player can play most CD-R discs. CD-Rs
written during a multisession recording can also be played, provid-
ed that the session had ended before the disc is played (depend-
ing on the write software). However, depending on the condition of
the CD writer, computer and the disc used, you may find that not
all discs will play successfully. When playing a CD-R disc, it is com-
pletely normal for the unit to take up to 30 seconds to recognize
the disc before starting to play. If the disc is not recognized
after a period of 30 seconds, remove the disc and then insert it
again.
•Irrespective of the actual recording capacity of the CD-R, do
not use its full capacity.
•CD-Rs should be preferably used instead of CD-RWs (rewritable
CDs) as, in certain cases, CD-RW playback may be faulty.
•Use reliable, good-quality CD write software.
•Close all other applications on the computer to ensure reliable
CD-R disc recording.
Disc you cannot play
DVD-ROM, DVD RAM, CDV, SACD, DVD Audio (High resolution tracks).  Data
part of CD Extra, disc with non standard shape (e.g. heart), disc with region
code different from the one specified on the back of the unit.
EN
3
PHONES
10cm/4”
5cm/2”
10cm/4”
10cm/4”10cm/4”
FrontRear
 
						

							Getting Started
Connecting to Audio-Visual Components
Connecting the Antennas
The FM antennas connect to the FM terminals on the sys-
tem’s back panel.
They must be hooked up in order to have clear reception.
4
TV
SAT
        AUDIO OUT (VCR)
     AUDIO OUT (SAT)
VCR
S-videoS-video provides a better connection for the video portion of the signal than composite video (yellow color terminal). When 
connecting S-video cable, a Composite video cable (yellow RCA connector) must also be used.
            VIDEO IN (TV)           S-VIDEO IN (TV)
           SCART IN (TV)
SCART video output (SCART cable is not supplied with this unit)
SCART video terminal provides the best quality for video signal. If there is no SCART socket is available on your TV 
set, check whether your TV has another Video socket (Composite, S-video) that you can use to connect your player.
The unit does not have audio signal from the SCART output.
1
Setup video outputYou can select either S-video or SCART as your video output (default is SCART). Try power off the unit and turn it on 
again if you see any picture distortion on the TV.
When S-VIDEO output is selected, SCART will only provide composite video signal.
When SCART output is selected, S-video ouput will be disabled.
Composite video signal is always available.
It is recommended that you should only use one kind of video connection method listed 
below.  
S-VIDEOVIDEO OUT
SCARTOPTICAL
    IN
CD/SAT
     OPTICAL OUT (CD/SAT)
Digital outputConnect components 
capable of outputting 
Dolby Digital (e.g. SAT) 
or standard PCM (CD) 
format digital signals.
WIRELESSS-VIDEOVIDEO OUT
SCARTOPTICAL
    IN
Tip:
• For FM reception, extend antenna to its
full length and arrange the antenna at dif-
ferent parts of the room until the recep-
tion is optimized.
 
						

							Getting Started
EN
5
Connecting the Speakers 
Speakers
There are 6 speakers equipped with the unit (2 front, 1 cen-
ter, 2 rear, 1 subwoofer). In order to enjoy good surround
effects, You need to connect the front speakers, center
speakers and subwoofer to the main unit; and connect the
rear speakers to the wireless receiver.
Speaker Polarity 
When connecting the speakers, make sure the polarities
(“+” speaker wire to “+” on the receiver) of speaker wires
and terminals are matched. If the cords are reversed, the
sound will be distorted and lack bass (“out of phase”
effect).
Do not ground the output line, it will cause damage to the
speaker.
WIRELESS
Rear Speakers (Surround) Subwoofer
(Wireless transmitter)
Purple / Grey striped
Green / 
Grey striped
Center Speaker
Front Speakers
White / 
Grey stripedRed / Grey striped
POWERON
OFFSRSL
Wireless receiver
Grey / Grey
 striped
Blue / Grey
 striped
Left Right
Antenna and Speaker
Wire Connection
Push Speaker terminal tab
down to insert wire.
Release tab to lock wire in
the terminal.
NOTE: Make sure the insulation
is completely removed from the
ends of the Antenna and
speaker wires at all connectionpoints.
 
						

							Getting Started
Wireless speaker connection
Wireless signal transmitter
The subwoofer comes with the unit is, at the same time,
the wireless signal transmitter. It converts the audio signal
from the unit into 5.8GHz radio frequency and transmit it
to the receiver. Connect the RJ45 connector at the back of
the subwoofer to the back of the main unit, whenever the
main unit is on, the subwoofer will transmit audio signal to
the rear speakers through the wireless signal receiver.
Wireless signal receiver
The wireless signal receiver will pick up the best audio sig-
nal from wither one of its antennas and convert the signal
back to its original form, and pass it to the rear speakers.
Connecting procedures
1. Connect the subwoofer (transmitter) to the main unit
using RJ45 connector and speaker wires.
2. Connect the rear speakers to the wireless receiver and
plug the AC power cord into the power outlet.
3. Make sure the transmitter is in STANDBY mode before
pressing the POWERbutton to turn the receiver on.
4. The LED on the receiver will flash when searching for a
signal, they will turn green after the signal has been found.
5. Adjust the antenna on both the transmitter and receiver
to get the best signal reception.
Changing the channel frequency
To minimize interference from other 5.8 GHz systems (Cell
phone, wireless LAN), you may select a different transmis-
sion channel if you should experience interference. The
channel selector is located on the front panel of the sub-
woofer (transmitter). You may change the transmission
channel according to the table below:
6
SIGNAL
POWER
ON
OFFSRSL
Channel Position 1 Position 2 Position 3
1 Off On On
2 OnOnOff
3 Off On Off
4 On Off On
5 Off Off On
6 On Off Off
Note:
1. You need to restart the main unit when-
ever a different transmission signal is
selected.
2. People walking between the transmitter
and receiver may cause interference.
3. The maximum transmission range is 30 meters, walls and
obstacle blocking between may affect the efficient trans-
mission range.
4. It is advised that you should place the receiver as high
as possible.
 
						

							Getting Started
Positioning your speaker
1   Left, Right (Front Speakers)
They carry primarily music and sound effects.
2   Center
In surround mode, the center speaker carries much of the
dialogue as well as music and effects. It should be set
between the left and right speakers.
3   Surround (Rear Speakers)
Their overall sound balance should be as close as possible
to the front speakers. Proper placement is vital to establish
an evenly distributed sound field.
Subwoofer
A subwoofer is designed to reproduce powerful low bass
effects (explosions, the rumble of spaceships, etc.) which
dramatically heightens involvement with the action on the
screen.
Magnetic shielding
Speakers placed less than two feet from the TV set must be
magnetically shielded in order to prevent picture distor-
tion. Front and center speakers provided with this unit are
magnetically shielded to protect your TV set.
It is not recommended to place the rear speakers and sub-
woofer near the TV set.
Front Speaker Placement
Even if you can't duplicate this ideal home theater setup
exactly, the following suggestions for speaker placement
will help you to get better results.
Alignment
Align the center speaker evenly with (A), or slightly behind
(B), the left and right speakers, but not ahead of them.
Advanced Setting
Angle
Placing the left and right speakers to form a 45-degree
angle with your favorite viewing position will duplicate the
soundtrack mixer's perspective.
Height
The mid- and high-frequency drivers of the three front
speakers should be as close as possible to the same height.
This often requires placing the center speaker directly atop
(A) or beneath (B) the TV set.
EN
7
1
1
2
3
3
A
B
Courtesy Dolby LaboratoriesCourtesy Dolby Laboratories
Courtesy Dolby Laboratories
Courtesy Dolby Laboratories
 
						

							Getting Started
Preferred surround placement
Location
If possible, place surround speakers to either side of the lis-
tening area, not behind it.
Height
If space permits, install surround speakers 2-3 feet above
viewers. This helps to minimize localization effects.
Aiming
Aiming surround speakers straight across the room, not
down at viewers, helps create a more open, spacious sur-
round sound field.
Advanced Setting
Alternative Surround Placement
Rear wall
If rear wall mounting is the only choice, aim the speakers at
each other (A), towards the front (B) or even towards the
sidewalls (C, D). Experiment with placement until surround
sounds seem to envelop you, rather than coming from
behind you.
No adjacent walls
Surround speakers can go on stands facing each other to
approximate the preferred sidewall mounting (A), or to the
sides or rear of the viewing area aimed upwards. In the lat-
ter case, they can go right on the floor, or preferably, a few
feet off the floor such as on end tables (B).
8
Courtesy Dolby Laboratories
Courtesy Dolby Laboratories
Courtesy Dolby LaboratoriesCourtesy Dolby Laboratories Courtesy Dolby Laboratories