Home > Flir > Thermovision > ThermovisionFLIR PTSeries Installation Manual

ThermovisionFLIR PTSeries Installation Manual

Here you can view all the pages of manual ThermovisionFLIR PTSeries Installation Manual. The Flir manuals for Thermovision are available online for free. You can easily download all the documents as PDF.

Page 31

427-0032-00-12, Version 170 Mar 2014 2-15
2 Basic Operation and Configuration
2.6.5 Security Settings
To maintain security of your systems set passwords for each of the three login accounts.
user —The user account can only use the Live Video screen and controls.
expert —The expert account can use the Live Video screen and the camera Setup screen.
admin —The admin account can use all screens
After each password is set and confirmed, select the Save button at the bottom (it may be necessary 
to scroll down...

Page 32

427-0032-00-12, Version 170 Mar 2014 2-16
2 Basic Operation and Configuration
It is also possible to limit access to the camera from a client program (such as FSM) by IP address. To 
do so, in the Maintenance menu select Sensor, then Networking. Set the “Allow anonymous clients” 
parameter to No, and then add in the allowed addresses in the Remote Clients list and click Save.
Note, once one or more addresses has been added to this list, only these computers will be able to 
access the camera as a client....

Page 33

427-0032-00-12, Version 170 Mar 2014 2-17
2 Basic Operation and Configuration
2.7 Thermal Imaging Overview
When power is applied to the PT-Series camera, a FLIR splash 
screen is displayed for less than two seconds, and then the camera 
outputs the live video image. No operator action or intervention is 
required and no configuration of the camera is necessary. 
The thermal camera makes an image based on temperature 
differences. In the thermal image, by default the hottest item in the 
scene appears as...

Page 34

427-0032-00-12, Version 170 Mar 2014 2-18
2 Basic Operation and Configuration
They are perfect for a wide variety of applications including transportation, maritime, security, fire 
fighting, and medical applications. The cameras often provide improved daytime viewing in 
environments where traditional video camera performance suffers, such as in shadows or backlit 
scenes.
The PT-Series camera is a state-of-the-art thermal imaging system that will provide excellent night 
visibility and situational...

Page 35

427-0032-00-12, Version 170 Mar 2014 2-19
2 Basic Operation and Configuration
2.8 Troubleshooting Tips
If you need help during the installation process, contact your local FLIR representative or, call 877-
773-3547 inside the US. FLIR Systems, Inc. offers a comprehensive selection of training courses to 
help you to get the best performance and value from your thermal imaging camera. Find out more at 
the FLIR training web page: http://www.flir.com/training.
Image freezes momentarily:  By design, the...

Page 36

427-0032-00-12, Version 170 Mar 2014 2-20
2 Basic Operation and Configuration
Unable To Communicate Over Ethernet:  First check to ensure the physical connections are intact 
and that the camera is powered on and providing analog video to the monitor. When the camera is 
turned on, confirm the startup information is displayed on the analog monitor after approximately 90 
seconds. For example:
S/N: 1234567
IP Addr: 192.168.250.116
Confirm that the IP address for the PC (for example, 192.168.250.1) is on...

Page 37

427-0032-00-12, Version 170 Mar 2014 2-21
2 Basic Operation and Configuration
In the Sensors Panel, if the camera is the active sensor, there will be an “(Active)” 
notification next to the name of the camera. Only one camera or sensor can be 
active at a time. To make the camera active, right click on the icon to the left of the 
camera name and select “Set Active”, or simply double-click on the icon.
The icon to the left of the camera name indicates the status of the sensor. The following is a list of...

Page 38

427-0032-00-12, Version 170 Mar 2014 2-22
2 Basic Operation and Configuration
2.9 General Errors
In the status bar at the bottom of the FSM screen there may be an indication that an error has 
occurred. When you position the cursor over the error icon (exclamation mark), the error will be 
displayed in a temporary pop-up. It is possible to view all the error messages by selecting the Tools 
tab at the top of he screen, and then select the Log button to the left.
Unable to View Video Stream:  If the video...

Page 39

427-0032-00-12 Version 170 Mar 2014 2-23
2 Basic Operation and Configuration
Cable characteristics are determined by a number of factors (core material, dielectric material and 
shield construction, among others) and must be carefully matched to the specific application. 
Moreover, the transmission characteristics of the cable will be influenced by the physical environment 
through which the cable is run and the method of installation. Use only high quality cable and ensure 
the cable is suitable to the...

Page 40

2-24 427-0032-00-12 Version 170 Mar 2014
2 Basic Operation and Configuration
2.10 Restoring the Factory Settings
The camera comes configured from the factory with default settings for the IP address 
(192.168.250.116), the login passwords, and all of the other configuration parameters (stored in a file 
called server.ini). In some cases, it may be necessary to restore the settings of the camera to the 
original factory settings. If necessary, this can be accomplished by temporarily connecting a loopback...
Start reading ThermovisionFLIR PTSeries Installation Manual

Related Manuals for ThermovisionFLIR PTSeries Installation Manual

All Flir manuals