ThermovisionFLIR Firmware Update Tool FFUT Quick Start Guide

FFUT Quick Start Guide       427-0073-99-28 rev.110 
11 
 
To update a camera, select the camera to be updated from the list, and then click Next. 
 
   

FFUT Quick Start Guide       427-0073-99-28 rev.110 
12 
 
The software will display a picture of the camera and show the camera information. Select the Update 
button to perform the update. 
 
   

FFUT Quick Start Guide       427-0073-99-28 rev.110 
13 
 
The following sequence of screen shots will be displayed while the camera is being updated. Be sure to 
allow adequate time for all 5 steps of the update to complete (refer to the second status bar for 
information about which step is in progress). 
When the software update is finished, the configuration file and login passwords will be restored to the 
factory defaults. Log in to the camera web browser to restore any changes that were done prior...

FFUT Quick Start Guide       427-0073-99-28 rev.110 
14 
 
  

FFUT Quick Start Guide       427-0073-99-28 rev.110 
15 
 
  

FFUT Quick Start Guide       427-0073-99-28 rev.110 
16 
 
  
  

FFUT Quick Start Guide       427-0073-99-28 rev.110 
17 
 
 
 
Note, if you have more cameras to update, simply hit the back button and repeat the process. It is not 
necessary to discover cameras again (“Detect and Update my FLIR Device” option) unless the 
camera to be updated was not discovered the first time. 
   

FFUT Quick Start Guide       427-0073-99-28 rev.110 
18 
 
4. Troubleshooting 
Downloading Firmware Updates 
When the FFUT utility checks for firmware updates online, if the PC does not have an Internet connection the 
following error will occur. 
  
If the firmware updates have been downloaded on another PC, it is possible to transfer the downloaded 
packages to the current PC via a USB memory device. 
Detect and Update 
If no cameras are discovered, check to make sure the PC has an IP address in the...

FFUT Quick Start Guide       427-0073-99-28 rev.110 
19 
 
 
 
If a camera is discovered (or entered manually) but the FFUT utility does not display the current 
firmware version, it will not be possible to use the FFUT utility to update the camera. The camera can 
be updated manually using a web browser. Contact [email protected] for help with updating the 
camera. 
 
For installations that are unable to use the FFUT software, for whatever reason, a firmware update 
package with instructions is also...