Tenda Router W330R User Manual

 Wireless-N Broadband Router   
when a RADIUS server 
is connected to the 
Router.  
 
Radius IP Address: 
Please input IP address 
of the radius server 
here. 
 
Radius Port: Please 
input the port number of 
the radius server here. 
 
Shared key:The 
encryption key that the 
router is authenticated 
through RADIUS server
 
Session Timeout:  The 
recertification time 
interval between the 
router and the server. 
The default value is 
3600s. 
 
  36 

 Wireless-N Broadband Router   
5. WPA2-Enterprise 
This security mode is also 
used when a RADIUS 
server is connected to the 
Router. 
 
WPA Algorithms: Select 
key Algorithms such as 
TKIP and AES. 
 
Radius IP Address:  
Please input IP address of 
the radius server here. 
 
Radius Port:  Please input 
the port number of the 
radius server here. 
 
Shared key: The encryption
key that the router is 
authenticated through 
RADIUS server 
 
Session Timeout:  The 
recertification  time interval 
between...

 Wireless-N Broadband Router   
6. 802.1X 
This security mode is used 
when a RADIUS server is 
connected to the Router. 
802.1x, a kind of Port-based 
authentication protocol, is 
an authentication type and 
strategy for users. The port 
can be either a physic port 
or logic port (such as 
VLAN). For wireless LAN 
users, a port is just a 
channel. The final purpose 
of 802.11x authentication is 
to check if the port can be 
used. If the port is 
authenticated successfully, 
you can open this port which...

 Wireless-N Broadband Router   
WEP encryption which 
indicates the authentication 
process between wireless 
adapter and wireless router.
  
Radius IP Address: Please 
input IP address of the 
radius server here. 
 
Radius Port:  Please input 
the port number of the 
radius server here. 
 
Shared key: The encryption 
key that the router is 
authenticated through 
RADIUS server. 
 
Session Timeout:  The 
recertification time interval 
between the router and the 
server. The default value is 
3600s....

 Wireless-N Broadband Router   
dictionary or too 
easy to remember! 
Wireless clients will 
remember the WEP 
key, so you only 
have to input the 
WEP key on 
wireless client 
once, and it’s worth 
to use complicated 
WEP key to improve 
security level.
 
 
WPS Settings 
 
WPS (Wi-Fi Protected 
Setting) can be easy and 
quick to establish the 
connection between the 
wireless network clients 
and the Router through 
encrypted contents. The 
users only enter the PIN 
code to configure without 
selecting...

 Wireless-N Broadband Router   
secret keys by manual. 
 
WPS Mode: Supports two 
ways to configure WPS 
settings:  
PBC (Push-Button 
Configuration) and PIN 
code. 
 
PBC: Select the PBC or 
press the WPS button on 
the panel of the Router 
(Press the button for one 
second and WPS indicator 
will be blinking for 2 
minutes, which means the 
WPS is enabled. During 
the blinking time, you can 
enable another Router to 
implement the WPS/PBC 
negotiation between them. 
At present, the WPS only 
support...

 Wireless-N Broadband Router   
a wireless client’s PIN 
code in the field and keep 
the same code in the 
client. 
 
 
WDS Settings 
 
In this mode, you can 
expand the scope of 
network by combining up 
to four other access points 
together, and every 
access point can still 
accept wireless clients. 
 
Lazy Mode: You need 
configure the router’s 
BSSID into another 
device, not need input 
another router’s BSSID in 
it, and then connect 
together automatically.   
 
Bridge Mode:  You can 
wirelessly...

 Wireless-N Broadband Router   
you need to add the 
Wireless MAC address of 
the connecting device into 
the Routers AP MAC 
address table or select 
one from the scanning 
table. At the same time, 
the connecting device 
should be in Lazy, 
Repeater or Bridge mode.
 
Repeater Mode: You can 
select the mode to extend 
the distance between the 
two WLAN devices. 
Functioning as a WDS 
repeater, the W330R 
connects to both a client 
card as an AP and to 
another AP. In typical 
repeater applications, APs...

 Wireless-N Broadband Router   
Routers AP MAC address 
table and the connecting 
client should be in Lazy, 
Repeater or client mode. 
 
Encrypt Type: You can 
select WEP mode, TKIP 
mode, AES mode for 
security here. 
 
Pass phrase:  Enter the 
key, the key format 
according to encryption 
you selected. 
 
AP MAC: Input the MAC 
address of another 
wireless router. 
 
NOTE :  
Two wireless 
routers must use 
the same mode, 
band, channel 
number, and 
security setting!
 
 
 
44 

 Wireless-N Broadband Router   
 Advanced Wireless Settings 
 
This section is to configure 
the advanced wireless 
setting of the Router, 
including the Radio 
Preamble, 802.11g/n Rate, 
Fragmentation Threshold, 
RTS Threshold , Beacon 
Period and DTIM Interval. 
 
BG protection Mode:  Auto 
by default. You can select 
On or Off.  
 
Basic Data Rates:  For 
different requirement, you 
can select one of the 
suitable Basic Data Rates.
Here, default value is  (1-2-5.5.-11Mbps…).
 
Beacon Interval:  Set...