Tenda Router W330R User Manual

 Wireless-N Broadband Router   
authentication. Generally 
speaking, AP mode is 
passive to be connected 
with work station, but 
Station mode always takes 
the initiative in connecting 
with AP.  
 
 
SSID: SSID is the unique 
ID name of access point. 
The wireless work station 
must keep the same SSID 
name with the APs for 
connections. By enabling 
Open Scanning button, 
the device can search 
available APs. 
MAC:  To connect certain 
AP, you need to know the 
APs MAC address. By 
enabling Open...

 Wireless-N Broadband Router   
By enabling Open 
Scanning button to find out 
the available APs 
channel. 
 
Security Mode: router 
provides the following 
security authentication 
methods:  
(1) WEP: selects ASCII 
format (5 or 13 ASCII 
characters except illegal 
characters.) or Hex format 
(10 or 26 Hex characters).
(2) WPA/WPA2-personal 
(PSK) is safer than other 
encryption methods 
because the key is subject 
to change all the time. 
WPA-PSK/WPA2-PSK 
utilizes the TKIP or AES 
encryption...

 Wireless-N Broadband Router   
Default KEY: After 
entering the WEP keys, 
select one key as the 
default one, for example, 
Key 1   
 
KEY Format:  AASCII: 
Enter 13 characters with 
case sensitive (a-z, A-Z 
and 0-9). Hex: enter 26 
Hex characters (A-F, 
a-f and “0~9”). 
 
KEY 1: If the KEY 1 is 
selected as default key, 
the key will be enabled. 
 
KEY 2: If the KEY 2 is 
selected as default key, 
the key will be enabled.   
 
KEY 3: If the KEY 3 is 
selected as default key, 
the key will be...

 Wireless-N Broadband Router   
WPA/WPA2 Algorithm: 
When the WPA-PSK 
/WPA2-PSK 
authentication is selected, 
you can  select one from 
two:  TKIP and AES. For 
example, if the wireless 
provider selects TKIP, the 
wireless receiver (client) 
also needs to select TKIP 
for this authentication way.
  
Password:  When WPA- 
PSK /WPA2-PSK 
authentication type is 
selected, enter the access 
password provided by AP 
users here.   
 
Apply:  Click “Apply” to 
make the settings go into 
effect.  
 
Cancel:...

 Wireless-N Broadband Router   
Basic Settings   
 
Network Mode: Supports 
802.11b/g mixed, 802.11b, 
802.11g and 802.11b/g/n 
mixed modes. 
 
Main SSID: Main Service 
Set Identifier. It’s the 
name of your wireless 
network. 
 
Minor SSID:  Minor Service 
Set Identifier. It is optional.
 
Broadcast (SSID):   Select
  “enable” to enable the 
devices SSID to be visible 
by  wireless clients. 
 
BSSID:  It is a 48bit identity 
used to identify a particular 
BSS (Basic Service Set) 
within an area. In...

 Wireless-N Broadband Router   
Channel: From the drop- 
menu, it is for selecting the 
working channels of the 
wireless network. Please 
select from 1 to 13,or 
select AutoSele ct to select 
different channels.   
 
Channel Bandwidth ：
Select wireless work 
frequency 20M or 20/40M.
 
HT TxStream:  RF 
Transmit Stream. 
 
HT RxStream:  RF 
Receive Stream.  
 
 
Wireless Security Settings 
 
This page is to configure the wireless security of your Router. 
Six wireless security modes, WEP, WPA-Personal,...

 Wireless-N Broadband Router   
1. Mixed WEP 
WEP(Wired Equivalent 
Privacy)a basic encryption 
method, usually encrypts 
wireless data using a 
series of digital keys (64 
bits or 128 bits in length). 
By using the same keys 
on each of your wireless 
network devices, you can 
prevent unauthorized 
wireless devices from 
monitoring your 
transmissions or using 
your wireless resources. 
 
SSID Choice: Select 
SSID to be configured 
security. The device 
supports to configure 
different security classes...

 Wireless-N Broadband Router   
can choose one from 
mixed WEP, 
WPA-Personal, 
WPA-Enterprise, etc.  
  
Default Key: Select a 
valid encryption key. 
 
WEP Key1, 2, 3, 4:   
Enter the WEP key here. 
Please note that the key 
should be in accordance 
with the key format and be 
valid. The key should be   
ASCII Characters  or 
Hexadecimal Digits  
 
2. WPA-Personal 
WPA (Wi-Fi Protected 
Access), a Wi-Fi 
standard, is a more recent 
wireless encryption 
scheme, designed to 
improve the security...

 Wireless-N Broadband Router   
[Temporal Key Integrity 
Protocol] or AES 
[Advanced Encryption 
Standard]) and can 
change the keys 
dynamically on every 
authorized wireless 
device.   
 
WPA Algorithms:  Select 
one encryption type, AES 
or TKIP. (AES is stronger 
than TKIP.)   
 
Pass Phrase: Enter the 
key which must have 8-63 
ASCII characters. 
 
Key Renewal Interval: 
Enter the key renewal   
period. It is to tell the   
Router how often to 
change the keys. 
 
 
34 

 Wireless-N Broadband Router   
3.WPA2-Personal 
WPA2 (Wi-Fi Protected 
Access version 2), Its 
more secure than Wired 
Equivalent Privacy (WEP) 
and easy to set up.   
 
WPA Algorithms:  Select 
key Algorithms  such  as 
TKIP, AES  and 
TKIP&AES. 
 
Pass Phrase:  Enter the 
  key which must have 
8-63 ASCII  characters. 
 
Key Renewal Interval:  
Enter the key renewal 
period. It is to tell the 
Router how often to 
change the keys. 
 
 
4. WPA-Enterprise 
This Authentication 
protocol based on 
RADIUS...