Tenda Router 11N User Manual

                      11N Wireless Broadband Router User Guide 
 16 
 Connect Automatically: Connect automatically to the Internet after rebooting the 
system or connection failure. 
 Connect  on  Demand: Re-establish  your  connection  to  the  Internet  after  the 
specific  time  (Max  Idle  Time).  Zero  means  you  are  connected  to  the  Internet  all 
times.  Otherwise,  enter  the  minutes  to  be  elapsed  before  you  are  disconnected 
from the Internet.  
 Connect Manually: Connect to the...

                      11N Wireless Broadband Router User Guide 
 17 
 DNS server: Enter the necessary DNS server provided by your ISP. 
 Alternate DNS server: Enter the second DNS address if your ISP provides, which 
is optional. 
 
Dynamic IP (Via DHCP) 
If your connection mode is Dynamic IP, it means every time you access the Internet, you 
will  get  a  different  IP. You  don’t need  to  enter any parameters in  this mode,  just Click 
“Ok” to finish the settings. 
 
 
PPTP 
  Mode: Show your...

                      11N Wireless Broadband Router User Guide 
 18 
 Username/Password: Used  to  validate  identity  when  connecting  to  the  PPTP 
server. 
 Address  mode: Set  the  router’s  IP  address  mode,  you can  select  either 
“Dynamic”  or  “Static”.  If  your  ISP  doesn’t  provide  the  IP  address,  please  select 
“Dynamic”. 
 IP  address: Please enter  the IP  address  provided  by  your ISP,  inquire  your  local 
ISP if you are not clear. 
 Subnet  mask: Please  enter the...

                      11N Wireless Broadband Router User Guide 
 19 
 Subnet  mask: Please  enter the subnet mask provided  by  your  ISP ,generally  its 
255.255.255.0 
 Gateway: Please enter the gateway provided by your ISP, inquire your local ISP if 
you are not clear. 
All the above parameters are provided by ISP. 
 
4.3 LAN Settings 
Click “Advanced settings” –LAN settings to enter the following screen. 
  LAN MAC address: The Router’s LAN MAC address, which is unchangeable. 
 IP address: The...

                      11N Wireless Broadband Router User Guide 
 20 
 
 DNS setting: Select to enable the DNS server.  
 Primary DNS address: Enter the necessary address provided by your ISP.  
 Alternate DNS address: Enter  the second DNS address  if  your  ISP  provides, 
which is optional. 
NOTE: 
After the settings are completed, reboot the device to activate the modified settings. 
4.5 WAN Medium Type 
Wired WAN and wireless WAN 
 
NOTE: This function applies only to some of the products....

                      11N Wireless Broadband Router User Guide 
 21 
or you want to use it to amplify wireless signals. 
SSID:  SSID  (Service  Set  Identifier)  is  the  identity  of  the  wireless device. You can  only 
access  to  the  ISP’ network  by  entering  the  correct SSID,  namely the  SSID  of the ISP’s 
wireless  device.  You  can  click the “Open  scan” button  to  let the router  automatically 
search the ISP’s available SSID. The SSID can also be the SSID of the superior wireless 
device...

                      11N Wireless Broadband Router User Guide 
 22 
 
 
 Enable Bandwidth Control: To  enable  or  disable  the  internal  IP  bandwidth 
control. The default is disabled. 
 IP Address: The IP address range of the hosts whose traffic has been controlled. 
It can be a single IP address or IP address range. 
 Upload/Download: To  specify  the  traffic  heading  way  for  the selected  IP 
addresses: upload or download. 
 Bandwidth Range: The maximum  and  minimum  upload/download data...

                      11N Wireless Broadband Router User Guide 
 23 
 1. Enter 192.168.0.100 in the IP address field  
2. Select upload in the Upload/Download field. 
3. Enter 10-15 in the bandwidth range field 
4. Select “Enable” 
5. Click “Add to list” 
6. Click “Ok” to finish the upload rule settings. 
 
And then add a download rule as shown in the picture below. 
  
The setting method is the same as the above. 
 
Example  2 Set  the  download  rate of all  computers  within  the  range  of...

                      11N Wireless Broadband Router User Guide 
 24 
as shown in the picture below. 
 
 The setting method is the same as Example 1. 
 
4.7 Traffic Statistics  
Traffic statistics is used to display the bandwidth that LAN PC used.  

                      11N Wireless Broadband Router User Guide 
 25 
 Enable  Traffic  statistics: It is  used to  calculate the  traffic  used by the  LAN computers. 
You can enable it to calculate the traffic for you. Usually, disable it to improve the router’s 
data packet processing ability, and the default is disabled. When this function is enabled, 
the webpage  will  refresh  automatically  every five minutes, meanwhile, each  computer’s 
traffic value will refresh automatically. 
 IP address:...