Tenda Router 11N User Manual

                      11N Wireless Broadband Router User Guide 
 6 
 
Chapter 3 How to configure to access the Internet 
3.1 How to Set the Network Configurations 
Network Configurations under windows XP 
1. Right click “My Network Places” on your computer desktop and select “Properties”.    
 
2. Right click “Local Area Connection” and select “Properties”. 
 
3. Select “Internet Protocol (TCP/IP)” and click “Properties”. 
  

                      11N Wireless Broadband Router User Guide 
 7 
 4. Select “Obtain  an  IP  address  automatically”  and  “Obtain  DNS server  address 
automatically”. Click “OK” to save the configurations. 
 Or select  “Use  the  following  IP  address”  and  enter  the  IP  address,  Subnet  mask, 
Default gateway as follows:  
 IP Address: 192.168.0.XXX: (XXX is a number from 2~254) 
 Subnet Mask: 255.255.255.0 
 Gateway: 192.168.0.1 
 DNS  server: You  should  input  the  DNS  server  address...

                      11N Wireless Broadband Router User Guide 
 8 
Otherwise, you can enter 192.168.0.1. Click “OK” to save the configurations. 
  
Network Configurations under windows 7 
1.  Click the network icon  on  the  lower  right  corner  of  your  computer desktop,  and  then 
click” Open Network and Sharing Center”. 
 
2. Click “Change adapter settings” on the left side of the window. 
  

                      11N Wireless Broadband Router User Guide 
 9 
 
3. Right click “Local Area Connection” and select “Properties”. 
 
4. Double click” Internet Protocol Version 4(TCP/IPv4)". 
   

                      11N Wireless Broadband Router User Guide 
 10 
5. Select  “Obtain  an  IP  address  automatically”  and  “Obtain  DNS  server  address 
automatically”. Click “OK” to save the configurations. 
 
Or  select  “Use  the  following  IP  address”  and  enter  the  IP  address,  Subnet  mask, 
Default gateway as follows:  
 
 IP Address: 192.168.0.XXX: (XXX is a number from 2~254) 
 Subnet Mask: 255.255.255.0 
 Gateway: 192.168.0.1 
 DNS  server: You  should  input  the  DNS  server...

                      11N Wireless Broadband Router User Guide 
 11 
Otherwise, you can enter 192.168.0.1. Click “OK” to save the configurations. 
3.2 Log in to the Router 
1. To access  the  Router’s Web-based Utility,  launch  a  web  browser  such  as  Internet Explorer  or Firefox and  enter http://192.168.0.1.  Press  “Enter”. 
 2. The system will automatically choose the corresponding web language in accordance with the Browser’s language.  For example,  if your Browser’s language  is French,  the...

                      11N Wireless Broadband Router User Guide 
 12 
3.3 Fast Internet Access 
Two  kinds  of  fast  access methods  are  provided  on the  router’s web-based  utility: ADSL 
dial-up and DHCP. 
If you  select  ADSL  dial-up,  you only  need  to  enter  the  access  account  and  access 
password as well as the wireless password, and then click “Ok” to complete the settings. 
 
If you  select  DHCP, you  only  need  to  enter  the  wireless  password  and  click  “Ok”  to 
complete the...

                      11N Wireless Broadband Router User Guide 
 13 
The router provides two encryption setting screens, one is simple and easy, the other is 
advanced (For advanced setting, please refer to chapter 5.2). 
Simple and easy screen: 
Log  on  to  the  router’s  web-based  utility and  you  may  set  encryption  for  the  router. The 
default adopts WPA-PSK mode and AES Algorithm. The default password is 12345678, 
as shown below. 
 
NOTE: The wireless password can only be 8 characters in...

                      11N Wireless Broadband Router User Guide 
 14 
 
Chapter 4 Advanced Settings 
4.1 System Status  
System status screen allows you to view the router’s WAN port status and system status. 
 
 Connection status: It displays the router’s WAN connection status. 
Disconnected:  It  indicates  the router’s WAN  port  hasn’t  been  connected  with  the 
network cable. 
Connecting: It indicates the router’s WAN port is obtaining IP address. 
Connected: It indicates the Router is well...

                      11N Wireless Broadband Router User Guide 
 15 
 System time：It displays the system’s updated time 
 Connected client ：It displays the number of the connected computers(normally 
it displays the number of clients whose IP addresses obtained via DHCP server) 
 Software version：It displays the Router’s software version； 
 Hardware version：It displays the Router’s hardware version. 
 
4.2 WAN Settings 
Virtual Dial-up (PPPoE) 
  Mode: Show your current connection mode. 
 Access...