Technics DVD AUDIO System Sc Hda800 Operating Instructions
Have a look at the manual Technics DVD AUDIO System Sc Hda800 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 152 Technics manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 44
Settings
44
RQT6523
Reference
SELECT
ENTER
RETURN
SETUPRLC
LSRS
OmsOdB
OdBOmsOdB
OdBSWExit
Test
(LS)
(RS)
Exit
Test
signalCenter speakerSubwoofer
Surround speakers
A
If you enter the wrong number while entering your passwordPress [CANCEL].
Ratings
To set a ratings level
Go to “Ratings”, select a level between 7 and 0, press [ENTER].
1 Press the numbered
buttons on the remote
control to enter a
four-digit password.
2 Press [ENTER] twice.
Do not forget your password.
Note
To change the setting
After you...](http://img.usermanuals.tech/thumb/4760/66982/w64_sc-hda800_en_om_d-43.png "Page 44
Settings
44
RQT6523
Reference
SELECT
ENTER
RETURN
SETUPRLC
LSRS
OmsOdB
OdBOmsOdB
OdBSWExit
Test
(LS)
(RS)
Exit
Test
signalCenter speakerSubwoofer
Surround speakers
A
If you enter the wrong number while entering your passwordPress [CANCEL].
Ratings
To set a ratings level
Go to “Ratings”, select a level between 7 and 0, press [ENTER].
1 Press the numbered
buttons on the remote
control to enter a
four-digit password.
2 Press [ENTER] twice.
Do not forget your password.
Note
To change the setting
After you...")
![Page 45
45
RQT6523
Reference
Speaker settings
Refer to “Changing the settings” (\page 41).
You can enjoy multi-channel audio from DVDs without doing these
settings. Change them to improve the effect or when you connect a
subwoofer.
Channel balance
1 Press the cursor buttons (werq) to select
“Test” and press [ENTER].
A test signal is output in the following order:
L /C /R /RS /LS
2 Press the cursor buttons (eor r) to adjust
the level while the speaker is outputting the
signal.
3 Press [ENTER] to stop the test...](http://img.usermanuals.tech/thumb/4760/66982/w64_sc-hda800_en_om_d-44.png "Page 45
45
RQT6523
Reference
Speaker settings
Refer to “Changing the settings” (\page 41).
You can enjoy multi-channel audio from DVDs without doing these
settings. Change them to improve the effect or when you connect a
subwoofer.
Channel balance
1 Press the cursor buttons (werq) to select
“Test” and press [ENTER].
A test signal is output in the following order:
L /C /R /RS /LS
2 Press the cursor buttons (eor r) to adjust
the level while the speaker is outputting the
signal.
3 Press [ENTER] to stop the test...")
![Page 46
Using other equipment
46
RQT6523
Reference
1Turn [INPUT SELECTOR] to select
EXT mode.
Each time you turn [INPUT SELECTOR]:
TUNER –DVD –TAPE –EXT
On the remote control
Press [EXT].
2Operate the unit.See the unit’s manual for details on operation and
connection.
Analogue connectionA
q q
Turn [INPUT SELECTOR] to select EXT mode.
w w
Select Dolby NR and reverse mode.
e e
Press [*REC PAUSE].
r r
Press [w] or [q] to start recording.
t t
Start the source to be recorded.
See the unit’s manual for details on...](http://img.usermanuals.tech/thumb/4760/66982/w64_sc-hda800_en_om_d-45.png "Page 46
Using other equipment
46
RQT6523
Reference
1Turn [INPUT SELECTOR] to select
EXT mode.
Each time you turn [INPUT SELECTOR]:
TUNER –DVD –TAPE –EXT
On the remote control
Press [EXT].
2Operate the unit.See the unit’s manual for details on operation and
connection.
Analogue connectionA
q q
Turn [INPUT SELECTOR] to select EXT mode.
w w
Select Dolby NR and reverse mode.
e e
Press [*REC PAUSE].
r r
Press [w] or [q] to start recording.
t t
Start the source to be recorded.
See the unit’s manual for details on...")
![Page 49
49
RQT6523
Reference
Listening to the radio
Noise is heard.
The stereo indicator flickers or
doesn’t light.
Sound is distorted.
A beat sound is heard.Turn the TV off or separate it from the unit.
A low hum is heard during AM
broadcasts.Separate the antenna from other cables and leads.
The correct AM frequency can’t
be tuned in.Change the frequency step. Hold [FM/AM] down for 10 seconds to change the step to 9 kHz.
The cassette deck
Poor quality sound.
Recording is not possible.If the erasure prevention...](http://img.usermanuals.tech/thumb/4760/66982/w64_sc-hda800_en_om_d-48.png "Page 49
49
RQT6523
Reference
Listening to the radio
Noise is heard.
The stereo indicator flickers or
doesn’t light.
Sound is distorted.
A beat sound is heard.Turn the TV off or separate it from the unit.
A low hum is heard during AM
broadcasts.Separate the antenna from other cables and leads.
The correct AM frequency can’t
be tuned in.Change the frequency step. Hold [FM/AM] down for 10 seconds to change the step to 9 kHz.
The cassette deck
Poor quality sound.
Recording is not possible.If the erasure prevention...")
51 RQT6523 Reference Technical specifications Stereo TunerPre-amplifier section Input sensitivity/impedance EXT IN350 mV/15 kΩ Tuner section FM frequency range87.50–108.00 MHz (0.05 MHz step) FM antenna terminal75 Ω(unbalanced) AM frequency range 522–1629 kHz (9 kHz step) 520–1630 kHz (10 kHz step) Timer section ClockQuartz lock type FunctionPlay timer: everyday Rec timer: everyday Sleep timer: 120 min, 30 min intervals General Dimensions (W×H×D) 210 ×76.3 ×251 mm Mass1.1 kg Integrated AmplifierAmplifier section [Low frequency] Power output DIN 100 Hz, THD 1%, 4 Ω, both channel driven2 ×17 W RMS 100 Hz, THD 10%, 4 Ω, both channel driven2 ×22 W Load impedance4 Ω [High frequency] Power output DIN 1 kHz, THD 1%, 6 Ω, both channel driven2 ×15 W RMS 1 kHz, THD 10%, 6 Ω, both channel driven2 ×20 W Total harmonic distortion Half power, 1 kHz, 6 Ω0.07% Load impedance6 Ω [Surround, Center] Power output DIN 1 kHz, THD 1%, 8 Ω3 ×15 W RMS 1 kHz, THD 10%, 8 Ω3 ×22 W Load impedance8 Ω S/N DIN 500 mV input rated power84 dB Headphones Jack type3.5 mm STEREO Load impedance16–32 Ω General Power supplyAC 230–240 V, 50 Hz Power consumption140 W STANDBY condition0.8 W Dimensions (W×H×D) 210 ×104.8 ×309 mm Mass3.6 kg DVD Audio/Video PlayerDiscs played DVD-AUDIO DVD-VIDEO DVD-R (DVD-Video format discs) VIDEO CD CD (CD-DA) CD-R/RW (CD-DA, VIDEO CD, MP3, format discs) Video Signal systemPAL(PAL 60/NTSC) Output level (75 Ω) Composite video1 Vp-p S-Video Y1 Vp-p S-Video C0.3 Vp-p (PAL) 0.286 Vp-p (NTSC) Digital output terminalOptical ×1 Pick up Beam sourceSemiconductor laser Wavelength668 nm General Dimensions (W ×H ×D) 210 ×76.3 ×295 mm Mass1.5 kg Stereo Cassette DeckAudio section Track system4 track 2 channel STEREO Frequency response (Dolby NR off) TYPE 1(NORMAL)30 Hz–16 kHz (DIN) TYPE 2(HIGH)30 Hz–16 kHz (DIN) TYPE 4(METAL)30 Hz–16 kHz (DIN) S/N (Signal level=max recording level, TYPE 2) NR off56 dB (A weighted) Dolby B NR64 dB (A weighted) Motor Capstan driveDC servo motor Reel table driveDC motor Fast forward and rewind time (C-60) Approx. 90 seconds Wow and flutter0.1% (WRMS) General Dimensions (W×H×D) 210 ×104.8 ×241 mm Mass1.6 kg FRONT SPEAKERType3 way, 3 speaker, bass-reflex system Speaker(s) Superwoofer:14 cm cone type Midrange12 cm cone type Tweeter:2.5 cm semi-dome type Impedance HIGH 6 Ω LOW 4 Ω Input power HIGH 30 W (Music), 15 W (DIN) LOW 60 W (Music), 30 W (DIN) Output sound pressure level 86 dB/W (1.0 m) Cross over frequency120 Hz 4.5 kHz Frequency range45 Hz–70 kHz (–16 dB) 50 Hz–50 kHz (–10 dB) General Dimensions (W×H×D) 160 ×348 ×297.5 mm Mass5.0 kg HIGH stands for High Frequency. LOW stands for Low Frequency. CENTER /SURROUND SPEAKERType2 way, 2 speaker, closed type Speaker(s) Woofer:10 cm cone type Tweeter:6 cm ring shaped dome type Impedance8 Ω Input power30 W (Music) 15 W (DIN) Output sound pressure level 84 dB/W (1.0 m) Cross over frequency6 kHz Frequency range70 Hz–50 kHz (–16 dB) 100 Hz–45 kHz (–10 dB) General Dimensions (W×H×D) 122 ×209 ×156 mm Mass1.6 kg Notes: 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer.
RQT6523-B H0502BB0 Matsushita Electric Industrial Co., Ltd. Web Site: http://www.panasonic.co.jp/global/En