Taxan Projector U6 232 User Manual

18English 19 English
18English 19 English

Remote Control
User Controls
 Using the Remote Control
 Power 
Refer to the “Power On/Off the Projector” section on pages 13-14.
  Menu  
Press “Menu” to launch the on screen display (OSD) menu.  To exit OSD, press “Menu” again.
Aspect
Display the “Aspect Ratio” section of the OSD menu to select the desired aspect ratio.
  Computer
Press “Computer” to choose RGB signal.
  S-Video
Press “S-Video” to choose S-Video signal.
  Video
Press “Video” to choose...

18English 19 English
18English 19 English

 User Controls

  Freeze
Press “Freeze” to pause the screen image.
  Mute
Momentarily turns off the audio.
  D-Zoom (Digital Zoom)
Press “D-Zoom” button to zoom in of an image. 

20English 21 English
20English 21 English

Point the infrared transmitter of the remote control toward 
the remote control sensor located at the front of the main 
unit and operate.
Reception of the remote control signal should generally be 
possible within the range illustrated below.
If you operate from the rear position of projector, point 
the infrared transmitter of the remote control toward the 
screen.
  Exposure of the main unit’s remote control sensor or the 
remote control infrared...

20English 21 English
20English 21 English

 User Controls

The projector has multilingual On Screen Display (OSD) 
menus that allow you to make image adjustments 
and change a variety of settings. The projector will 
automatically detect the source. 
How to operate 
1.  To open the OSD menu, press “Menu” on the Remote Control or 
Control Panel.
2. When OSD is displayed, use     keys to select any item in the 
Main Menu.  While making a selection on a particular page, press 
 or “Enter” key to enter Sub...

22English 23 English
22English 23 English

User Controls

Menu Tree 

22English 23 English
22English 23 English

 User Controls

Picture
(Computer / Video Mode)
Quick Color Adj.
There are many factory presets optimized for various types of images.  
  PC: For computer or notebook.
  Graphic/Movie: For home theater. (best color reproduction)
  Presentation: For the daylight use. (maximum brightness)
  Custom : Memorize user’s settings.
Brightness
Adjust the brightness of the image.
  Press the  to darken image.
  Press the  to lighten the image.
Contrast
The contrast...

24English 25 English
24English 25 English

User Controls

Tint 
Adjusts the color balance of red and green.
  Press the  to increase the amount of green in the image.
  Press the  to increase the amount of red  in the image.
Sharpness 
Adjusts the sharpness of the image.
  Press the  to decrease the sharpness.
  Press the  to increase the sharpness.
Gamma
This allows you to choose a gamma table that has been fine-tuned to bring out the best image quality for the input.
Color Adj.
Press “Enter” to...

24English 25 English
24English 25 English

 User Controls

View
(Computer / Video Mode)
Frequency
“Frequency”changes the display data frequency to match the frequency of your computer’s graphic card. If you experience a vertical flickering bar, use this function to make an adjustment.
Tracking
“Tracking” synchronizes the signal timing of the display with the \
graphic card. If you experience an unstable or flickering image, use this function to correct it.
Horz.Position (Horizontal Position)
 Press the...

26English 27 English
26English 27 English

User Controls

Aspect Ratio
Use this function to choose your desired aspect ratio.
    4:3 : The input source will be scaled to fi  t the projection 
screen. 
    16:9 : The input source will be scaled to fi  t the width of the 
screen.
    Resizing: When a 4:3 image is bigger than a 16:9 screen, 
select the “Resizing” mode to fi  t the image onto the screen 
without changing the projection distance.
16:9 Vert. Shift
Adjust the image position to up or down,...

26English 27 English
26English 27 English

 User Controls

Audio
Volume
 Press the  to decrease the volume.
 Press the  to increase the volume.
Mute
 Choose the left icon to turn mute on.
 Choose the right icon to turn mute off.