Taxan Projector KG Ps 125x User Manual

E-40
Menu name
Setup
Info.
Auto SourceE-48  Item Name
Reference
PageSub Menu
Item Name
Auto Power OffE-48 

Menu PositionE-48
Input Format

Video
S-VideoE-49
Presentation Timer
E-49
E-50 
Language
On Screen
Background
Startup ScreenOptionE-51 
E-51 
E-51 
E-52 
Security LockE-52 
StatusE-53 
Factory DefaultE-53 
Lamp Timer ResetE-53 


ResolutionE-54
FrequencyE-54
Lamp TimerE-54 
Eco ModeE-49











Network PasswordE-52  













...

E-41
Image
• Perform this operation while projecting the picture for which the adjustment/setting will be made.
• Select the menu name “Image”.
See “Menu Operation Method” on Page E-34 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-39.
Picture Adj. / Fine Picture / H Position / V Position
Usually, automatic adjustment is performed at the time of signal...

E-42
Fine Picture
Adjust this when the picture shows a lack of color fidelity or flickering.
Select the “Fine Picture” item name and adjust with the SELECT () but-
tons so that the lack of color fidelity or the flickering disappears.
Image
H Position
Adjust this when the picture is shifted to the left or right.
Select the “H Position” item name and adjust with the SELECT () buttons.
V Position
Adjust this when the picture is shifted up or down.
Select the “V Position” item name and adjust with the...

E-43
Color
• Do the following operation while displaying the image you want to adjust or set.
• Select the menu name “Color”.
See “Menu Operation Method” on Page E-34 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Pages
E-39.
Quick Color Adj.
This function selects the preset color mode.
* The preset color mode will differ depending on the input source.
Press...

E-44
Color
Color Temp.
The screen color is affected by the color of the illumination and other
extraneous light.
This function adjusts the white, which is the reference color for video
equipment, and improves the quality of color reproduction. Adjustment
can also be used to enhance skin colors.
Select the item name “Color Temp.” and select the setting contents with the
SELECT () buttons.
Low ............ Produces warm whites (reddish)
Medium ...... Produces warm whites (yellowish)
Normal ..........

E-45
White Balance
Color
This function automatically adjusts the black level and the white level of
the Computer input signal to suit the personal computer.
1 Select the item name [White Balance] and press the ENTER button.
The display will change to [Input Black Signal].
2 The screen background color of the connected personal computer
will be set to black.
3. Press the ENTER button. The display will change to [Adjusting Black]
and the black level will be adjusted.
4 The adjustment of the black level is...

E-46
View
• Perform this operation while projecting the picture for which the adjustment/setting will be made.
• Select the menu name “View”.
See “Menu Operation Method” on Page E-34 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-39.
Filter
This function sets the sharpness when the input signal is adjusted to
the resolution of the projector and enlarged...

E-47
Vertical Flip / Horizontal Flip
In selecting the method of projecting to the screen, these functions are
set when the projector is in a rear screen installation.
Select the item name “Vertical Flip” or “Horizontal Flip” and select the setting
contents with the SELECT () buttons.
View
“Vertical Flip” Off
“Horizontal Flip” Off“Vertical Flip” Off
“Horizontal Flip” On“Vertical Flip” On
“Horizontal Flip” On“Vertical Flip” On
“Horizontal Flip” Off
Keystone
Keystone distortion will occur when the...

E-48
Setup
• Select menu name “Setup”.
See “Menu Operation Method” on Page E-34 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-39.
The Auto Source function automatically detects the input signal when
the power supply is switched on and when the input is switched.
Select the item name “Auto Source” and select the setting contents with the
SELECT ()...

E-49
Setup
Eco Mode
Use this if the picture is projected on a small screen and the picture is
too bright or when projecting images in dark rooms.
Select the item name “Eco Mode” and select the setting contents with the
SELECT () buttons.
On ............... The lamp’s brightness is reduced to approximately 80%, extending the
lamp’s service life.
(STATUS indicator is green)
Off .............. The lamp brightness is set to 100% and the screen is bright.
(STATUS indicator is off)
Note:
Frequent switching...