Tascam Remote Control Unit RC-898 Owners Manual
Here you can view all the pages of manual Tascam Remote Control Unit RC-898 Owners Manual. The Tascam manuals for Remote Control are available online for free. You can easily download all the documents as PDF.
Page 71
10.1 - Menu groups 10-7 Menu group F Menu itemParameter(s)Va l u e sReference Key ModeEnables control of all or one unitAll, Individual7.2.2, “Key Mode” Frame DisplayShows or hides the “frames” fieldson, off6.2, “Setting the pre- cision” SetupLoad or save Memory bankLoad, Save 0 , 1, 2, 3, 4, 5, 6, 7, 8, 9, F (factory)4.5, “Storing and recalling user set- ups” DispTimeAbsolute or rel- ative time dis- playAbsolute, Relative6.3, “Setting a rela- tive time reference” KeyModeFrameDisp Setup
Page 72
Section 10.2 - Alphabetical list of menu items 10-8 10.2 Alphabetical list of menu items In this table, if a menu item is assigned to a function key as a factory default, the function key name is shown in following the menu time name (e.g. F4 ). Menu Item Menu groupMenu Item Menu group 9pin Control Mode7MTC Output7 9pin Locate Preroll7Output TC Source F135 9pin Rec Acceptable7Output TC Timing5 9pin Time Mode7Output Timing9 Abs Diff F17EPark Position4 Analog In/Out F152Pre-roll Post-roll1 Clock9Rec...
Page 73
Section 10.3 - Specifications 10-9 10.3 Specifications 10.4 Dimensions Connections: D-sub 15-pin DTRS recorder control D-sub 9-pin Sony P2 control D-sub 15-pin Parallel control and tally, or up to 5 GPI-controlled units Size (w x h x d) 404 x 63 x 253 (mm) 15.9 x 2.7 x 10.0 (in) Weight 2.5 kg (5.5 lbs) Power Supplied from DTRS recorder Supplied accessories Remote cable (5m), Terminator Optional accessories CS-898 roll-around stand MK-8924 meter bridge mounting kit 404mm69.3mm 255mm
Page 74
Section 10.4 - Dimensions 10-10
Page 75
![Page 75
Index [ A–E]
Index-i
A
ABS time
as reference
2-3, 6-1, 10-3
frame rate
6-2
selection vs timecode
6-2
synthesizing timecode
8-1
with offset
8-1
Accessories
1-3
ALL INPUT
2-2, 5-3
ALL SAFE
2-2, 5-2
Ambient temperature
1-2
Analog audio input
7-5, 10-6
Arming tracks
2-2, 5-2, 9-5, 10-3
remotely on DA-98
9-5
Audio input
dithering
7-5, 10-2
reference level
7-6, 10-2
selection
7-5, 10-6
word length
7-5, 10-2
AUTO MON
2-2, 5-3
Auto Offset function
7-3, 8-5
AUTO PLAY
2-5, 6-3
AUTO PUNCH key...](http://img.usermanuals.tech/thumb/4737/60484/w300_RC-898_manual_d-74.png "Page 75
Index [ A–E]
Index-i
A
ABS time
as reference
2-3, 6-1, 10-3
frame rate
6-2
selection vs timecode
6-2
synthesizing timecode
8-1
with offset
8-1
Accessories
1-3
ALL INPUT
2-2, 5-3
ALL SAFE
2-2, 5-2
Ambient temperature
1-2
Analog audio input
7-5, 10-6
Arming tracks
2-2, 5-2, 9-5, 10-3
remotely on DA-98
9-5
Audio input
dithering
7-5, 10-2
reference level
7-6, 10-2
selection
7-5, 10-6
word length
7-5, 10-2
AUTO MON
2-2, 5-3
Auto Offset function
7-3, 8-5
AUTO PLAY
2-5, 6-3
AUTO PUNCH key...")
Index [ A–E] Index-i A ABS time as reference 2-3, 6-1, 10-3 frame rate 6-2 selection vs timecode 6-2 synthesizing timecode 8-1 with offset 8-1 Accessories 1-3 ALL INPUT 2-2, 5-3 ALL SAFE 2-2, 5-2 Ambient temperature 1-2 Analog audio input 7-5, 10-6 Arming tracks 2-2, 5-2, 9-5, 10-3 remotely on DA-98 9-5 Audio input dithering 7-5, 10-2 reference level 7-6, 10-2 selection 7-5, 10-6 word length 7-5, 10-2 AUTO MON 2-2, 5-3 Auto Offset function 7-3, 8-5 AUTO PLAY 2-5, 6-3 AUTO PUNCH key...
Page 76
![Page 76
Index [ F–O]
Index-ii
F
Factory settings 4-5, 10-7
Fast wind speed setting (DA-98)
9-6, 10-4
FF
2-5
Flowchart of monitoring modes
5-4
Formatting tapes
5-1, 10-6
Frame rate
ABS
6-2, 8-2
pull up/down
8-6, 10-5
Fs (sampling frequency)
5-1
Fs shift
see Pull up/down
Function keys
2-4, 4-3
default assignments
4-4
G
GPI devices 2-5, 3-2, 9-1
setup
9-1, 10-2
triggering
9-1, 10-2
Ground lift
2-6
I
ID (DTRS Machine ID) 3-1
Individual recording status when chasing timecode
8-8,
10-3
INPUT MONITOR
5-2...](http://img.usermanuals.tech/thumb/4737/60484/w300_RC-898_manual_d-75.png "Page 76
Index [ F–O]
Index-ii
F
Factory settings 4-5, 10-7
Fast wind speed setting (DA-98)
9-6, 10-4
FF
2-5
Flowchart of monitoring modes
5-4
Formatting tapes
5-1, 10-6
Frame rate
ABS
6-2, 8-2
pull up/down
8-6, 10-5
Fs (sampling frequency)
5-1
Fs shift
see Pull up/down
Function keys
2-4, 4-3
default assignments
4-4
G
GPI devices 2-5, 3-2, 9-1
setup
9-1, 10-2
triggering
9-1, 10-2
Ground lift
2-6
I
ID (DTRS Machine ID) 3-1
Individual recording status when chasing timecode
8-8,
10-3
INPUT MONITOR
5-2...")
Index [ F–O] Index-ii F Factory settings 4-5, 10-7 Fast wind speed setting (DA-98) 9-6, 10-4 FF 2-5 Flowchart of monitoring modes 5-4 Formatting tapes 5-1, 10-6 Frame rate ABS 6-2, 8-2 pull up/down 8-6, 10-5 Fs (sampling frequency) 5-1 Fs shift see Pull up/down Function keys 2-4, 4-3 default assignments 4-4 G GPI devices 2-5, 3-2, 9-1 setup 9-1, 10-2 triggering 9-1, 10-2 Ground lift 2-6 I ID (DTRS Machine ID) 3-1 Individual recording status when chasing timecode 8-8, 10-3 INPUT MONITOR 5-2...
Page 77
![Page 77
Index [ P–T]
Index-iii Output timing (DA-88)
7-4
Outputting timecode
8-6
P
PAL/SECAM 2-2, 8-2
Parallel port
2-5, 9-1
pinout
3-2
Park position
8-7, 10-3
Peak hold(meters)
7-6
Pitch shift
2-3, 7-5, 10-1
PLAY
2-5
Playback after location
6-3
Polarity (GPI devices)
9-1
Pre-roll
in auto punch mode
2-5, 6-7, 10-2
location
6-3, 10-1
serial port unit
9-2, 10-5
PRESET keys
2-4
PREVIOUS key
2-4, 4-3
PRRL key
6-7
Pull up/down
2-3, 8-6, 10-5
Pulse width (GPI event triggers)
9-1
Punch operations...](http://img.usermanuals.tech/thumb/4737/60484/w300_RC-898_manual_d-76.png "Page 77
Index [ P–T]
Index-iii Output timing (DA-88)
7-4
Outputting timecode
8-6
P
PAL/SECAM 2-2, 8-2
Parallel port
2-5, 9-1
pinout
3-2
Park position
8-7, 10-3
Peak hold(meters)
7-6
Pitch shift
2-3, 7-5, 10-1
PLAY
2-5
Playback after location
6-3
Polarity (GPI devices)
9-1
Pre-roll
in auto punch mode
2-5, 6-7, 10-2
location
6-3, 10-1
serial port unit
9-2, 10-5
PRESET keys
2-4
PREVIOUS key
2-4, 4-3
PRRL key
6-7
Pull up/down
2-3, 8-6, 10-5
Pulse width (GPI event triggers)
9-1
Punch operations...")
Index [ P–T] Index-iii Output timing (DA-88) 7-4 Outputting timecode 8-6 P PAL/SECAM 2-2, 8-2 Parallel port 2-5, 9-1 pinout 3-2 Park position 8-7, 10-3 Peak hold(meters) 7-6 Pitch shift 2-3, 7-5, 10-1 PLAY 2-5 Playback after location 6-3 Polarity (GPI devices) 9-1 Pre-roll in auto punch mode 2-5, 6-7, 10-2 location 6-3, 10-1 serial port unit 9-2, 10-5 PRESET keys 2-4 PREVIOUS key 2-4, 4-3 PRRL key 6-7 Pull up/down 2-3, 8-6, 10-5 Pulse width (GPI event triggers) 9-1 Punch operations...
Page 78
![Page 78
Index [ U–Z]
Index-ivas reference
2-3, 6-1, 10-3
auto offset function
8-5
chasing to external source
8-4
controlling the generator
8-3
display to frame accuracy
6-1, 10-7
dividing a tape into sessions
8-1
drop-frame
2-2, 8-2
enabling recording
10-4
error bypass
8-6, 10-3
generator
8-1, 8-2, 10-5, 10-6
individual recording status
8-8, 10-3
LTC in fast modes
8-7, 10-4
MTC output
8-7, 10-5
offset
8-4, 10-3
on-the-fly capture
2-4
output source
8-6, 10-4
output synchronization with audio
8-6,...](http://img.usermanuals.tech/thumb/4737/60484/w300_RC-898_manual_d-77.png "Page 78
Index [ U–Z]
Index-ivas reference
2-3, 6-1, 10-3
auto offset function
8-5
chasing to external source
8-4
controlling the generator
8-3
display to frame accuracy
6-1, 10-7
dividing a tape into sessions
8-1
drop-frame
2-2, 8-2
enabling recording
10-4
error bypass
8-6, 10-3
generator
8-1, 8-2, 10-5, 10-6
individual recording status
8-8, 10-3
LTC in fast modes
8-7, 10-4
MTC output
8-7, 10-5
offset
8-4, 10-3
on-the-fly capture
2-4
output source
8-6, 10-4
output synchronization with audio
8-6,...")
Index [ U–Z] Index-ivas reference 2-3, 6-1, 10-3 auto offset function 8-5 chasing to external source 8-4 controlling the generator 8-3 display to frame accuracy 6-1, 10-7 dividing a tape into sessions 8-1 drop-frame 2-2, 8-2 enabling recording 10-4 error bypass 8-6, 10-3 generator 8-1, 8-2, 10-5, 10-6 individual recording status 8-8, 10-3 LTC in fast modes 8-7, 10-4 MTC output 8-7, 10-5 offset 8-4, 10-3 on-the-fly capture 2-4 output source 8-6, 10-4 output synchronization with audio 8-6,...
Page 79
![Page 79
TEAC CORPOR ATION
TEAC AMERICA, INC. 7733 Telegraph Road, Montebello, California 90640 Phone: (213) 726-0\
303
TEAC CANADA LTD. 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada Phone: 905-8\
90-8008 Facsimile: 905-890-9888
TEAC MEXICO, S.A. De C.V Privada De Corina, No.18, Colonia Del Carmen Coyoacon, Mexico DF 04100 P\
hone: 5-658-1943
TEAC UK LIMITED 5 Marlin House, Marlins Meadow, The Croxley Centre, Watford, Herts. WD1 8Y\
A, U.K. Phone: 01923-819699
TEAC DEUTSCHLAND GmbH...](http://img.usermanuals.tech/thumb/4737/60484/w300_RC-898_manual_d-78.png "Page 79
TEAC CORPOR ATION
TEAC AMERICA, INC. 7733 Telegraph Road, Montebello, California 90640 Phone: (213) 726-0\
303
TEAC CANADA LTD. 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada Phone: 905-8\
90-8008 Facsimile: 905-890-9888
TEAC MEXICO, S.A. De C.V Privada De Corina, No.18, Colonia Del Carmen Coyoacon, Mexico DF 04100 P\
hone: 5-658-1943
TEAC UK LIMITED 5 Marlin House, Marlins Meadow, The Croxley Centre, Watford, Herts. WD1 8Y\
A, U.K. Phone: 01923-819699
TEAC DEUTSCHLAND GmbH...")
TEAC CORPOR ATION TEAC AMERICA, INC. 7733 Telegraph Road, Montebello, California 90640 Phone: (213) 726-0\ 303 TEAC CANADA LTD. 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada Phone: 905-8\ 90-8008 Facsimile: 905-890-9888 TEAC MEXICO, S.A. De C.V Privada De Corina, No.18, Colonia Del Carmen Coyoacon, Mexico DF 04100 P\ hone: 5-658-1943 TEAC UK LIMITED 5 Marlin House, Marlins Meadow, The Croxley Centre, Watford, Herts. WD1 8Y\ A, U.K. Phone: 01923-819699 TEAC DEUTSCHLAND GmbH...