Tascam RC 828 Manual
View the Tascam RC 828 Manual for free. All the Tascam manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 3
Section 2 Ð Parts of the RC-828
0.98 Ð 3
is off and use the
INPUT MONITOR
keys on
the DA-98 to turn off input monitoring on all
tracks.
[6] JOG/SHTL MON key and indicator
This key allows the selection of different monitor-
ing modes when shuttle mode is selected, either
with the unitsÕ own
SHUTTLE
controls, or from
the
JOG/SHUTTLE
key on the RC-828 [15].
This key and indicator duplicate the function of
the
SHTL MON
key and indicator of the DA-98,
and provide these...](http://img.usermanuals.tech/thumb/4737/61698/w300_RC-828_manual_d-2.png "Page 3
Section 2 Ð Parts of the RC-828
0.98 Ð 3
is off and use the
INPUT MONITOR
keys on
the DA-98 to turn off input monitoring on all
tracks.
[6] JOG/SHTL MON key and indicator
This key allows the selection of different monitor-
ing modes when shuttle mode is selected, either
with the unitsÕ own
SHUTTLE
controls, or from
the
JOG/SHUTTLE
key on the RC-828 [15].
This key and indicator duplicate the function of
the
SHTL MON
key and indicator of the DA-98,
and provide these...")
![Page 4
Section 3 Ð Monitoring modes
4 Ð 0.98
POINT
key will go out. Pressing and holding the
ERASE
key while pressing a
LOCATE POINT
key where no location point is stored (the indica-
tor is unlit) will have no effect.
To erase all location point memories, press and
hold down the
ERASE
key, and press the
CAPTURE
key.
[13] AUTO PLAY key and indicator
Turn on Òauto playÓ mode by pressing this key
(the indicator will light). The DTRS unit(s) con-
nected to the RC-828 will now start...](http://img.usermanuals.tech/thumb/4737/61698/w300_RC-828_manual_d-3.png "Page 4
Section 3 Ð Monitoring modes
4 Ð 0.98
POINT
key will go out. Pressing and holding the
ERASE
key while pressing a
LOCATE POINT
key where no location point is stored (the indica-
tor is unlit) will have no effect.
To erase all location point memories, press and
hold down the
ERASE
key, and press the
CAPTURE
key.
[13] AUTO PLAY key and indicator
Turn on Òauto playÓ mode by pressing this key
(the indicator will light). The DTRS unit(s) con-
nected to the RC-828 will now start...")
View the Tascam RC 828 Manual for free. All the Tascam manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.