Tascam Dvd Player DV-D01U Owners Manual

TASCAM  DV-D01UT/C 11

ConnectionsDo not connect the power cord until all other connections have been made.
Connecting a TV
Distortion of picture may occur when connecting to the TV 
via a VCR, or to a TV with a built-in VCR.
You need to set “MONITOR TYPE” in the PICTURE menu 
correctly according to the aspect ratio of your TV. (See page 26.)
To connect a conventional TV
The unit
Audio/video cable (supplied)
TV
To connect a TV equipped with the HDMI 
terminal
HDMI connection allows you to enjoy high...

1 TASCAM  DV-D01UT/C

ConnectionsDo not connect the power cord until all other connections have been made.
Connecting to a stereo amplifier/
receiver
You can enjoy high-quality audio by connecting the unit’s audio 
output to an amplifier or receiver.
Amplif ieror receiver
The unit
Audio cable (not supplied)
NOTE
When using the unit with a stereo amplifier or receiver, set 
“DOWN MIX” in the AUDIO menu to “STEREO”. (See page 
27.)
Connecting to a digital 
component
You can enhance the sound quality...

TASCAM  DV-D01UT/C 1 

Basic operations
Turning the unit on/off
Press STAND-BY/ON.
The following messages will appear on the TV screen.
NOW READING
“OPEN”/”CLOSE”: 
Appears when opening or closing the disc tray.
“NOW READING”: 
Appears when the system is reading the disc/file 
information.
“REGION CODE ERROR!”: 
Appears when the Region Code of the DVD VIDEO does 
not match the code the system supports. The disc cannot 
be played back.
“NO DISC”: 
Appears when no disc is loaded.
“CANNOT PLAY THIS...

1 TASCAM  DV-D01UT/C

Basic operations
Changing the scan mode
The unit can be accommodated to your TV’s scan mode.
NOTE
To use the unit in the progressive mode, it is required that 
the unit is connected to the TV by using an HDMI cable or a 
component video cable (supplied). (See page 7.)
While DVD stopped
Press and hold PROGRESSIVE SCAN for 2 
seconds.
Currently selected scan mode appears on the display 
window.
Press Cursor ¥/˙ to select the desired 
mode.
Each time you press the button, the...

TASCAM  DV-D01UT/C 1 

The icon such as  shows the disc formats or file types the 
operation is available for.
The buttons described below are used on pages 11 to 15.
OPEN/
buttons
Cursors
Number
DISPLAY
CLOSE
INSTANT
REPLAY
TITLE/
GROUP
STOPOPEN/CLOSEPLAYSTAND-BY/ON 
•Basic playback
To play a disc·
Press ø on the unit or OPEN/
CLOSE on the remote control.
1.
The unit turns on and the disc tray comes 
out.
Place a disc.
•
2.
With the label side upWhen placing an 8 cm disc
Press ¥ (play button) on...

1 TASCAM  DV-D01UT/C

Playback information on the display 
window
DVD VIDEO
Example: When a DVD VIDEO encoded with Dolby Digital      
5.1 ch is played.
Chapter numberElapsed playing time(hour:minute:second)
Digital signal format indicator
Pressing DISPLAY
Title numberChapter number
DVD VR disc
Example: During playback on the Original program *1.
Chapter numberElapsed playing time(hour:minute:second)
Pressing DISPLAY
Title numberChapter number
Example: During playback on the Playlist *1.
Chapter...

TASCAM  DV-D01UT/C 1 

ASF/MPEG-2/MPEG-1/DivX file
Example: When an ASF file is played.
Track number
Elapsed playing time (hour:minute:second) (during playback only)
Group numberTrack number
Pressing DISPLAY
NOTE
You can change the time information mode (except for MP3/
WMA/WAV/ASF/MPEG-2/MPEG-1/DivX). (See page 16.)
You can also check the playback information on the TV 
screen. (See page 16.)
Screen saver
An image may burn in on a TV screen if a static picture is 
displayed for a long time. To...

1 TASCAM  DV-D01UT/C

Skip to the beginning of a 
desired selection
Using ≤/µ buttons
For DVD VIDEO/DVD VR (chapter): During playback
For VCD/SVCD (track): During playback without PBC function
For DVD AUDIO/CD/MP3/WMA/WAV/JPEG/ASF/MPEG-2/MPEG-1/DivX (track/file): During playback or while stopped
·
·
·
·
Press ≤ or µ repeatedly.
NOTE
When playing back an MP3/WMA/WAV/JPEG/ASF/        
MPEG-2/MPEG-1/DivX file, you can make operations using 
the file control display. (See page 19.)
This feature may not...

TASCAM  DV-D01UT/C 1 

Selecting the desired title/ 
playlist from the control display
During playback or while stopped.
Press TOPMENU/PG or MENU/PL.
·
1.
The control display is shown on the TV screen, and the unit 
starts playback of the first title/playlist.
The PLAY LIST is shown only when the playlist is on the 
DVD VR disc.
TOP MENU/PG: shows the ORIGINAL PROGRAM.
Example:
*1*2*3*4*5*6
*1:  Title number*2: Recording date*3:  Recording source (TV station, the input terminal of the 
recording...

0 TASCAM  DV-D01UT/C

Advanced operation
The icon such as  shows the disc formats or file types the 
operation is available for.
The buttons described below are used on pages 15 to 24.
RETURN
PAGE 
ANGLE 
SUBTITLE 
TOP MENU 
Cursors/
ENTER 
PREV (    ) NEXT(    )
SLOW - SLOW +
REPEAT
ON SCREEN
MENU
FVPP 
ZOOM
AUDIO
Numberbuttons
Using the on-screen bar
You can check disc information and you can use some functions 
using the on-screen bar.
Showing the on-screen bar
Whenever a disc is loaded
Press ON...