Sunbeam Iron 421a Series C Manual

Instruction ManualSteam Master
®
Irons
Manual de InstruccionesPlanchas Steam Master
®
www.sunbeam.comP.N. 113165-004
MODEL S/ 4211, 4212, 4213,
MODELOS
4214,
4215, 4216,
na
4219,
4220 

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed including the following:
READALLINSTRUCTIONSBEFOREUSE
• Use iron only for its intended use.
• To protect against risk of electric shock, do not immerse the iron in water or other
liquids.
• The fabric select dial and steam lever  should always be turned to “O/Off” before
plugging or unplugging from out let. Never yank cord to disconnect from outlet;
instead, grasp plug and pull to disconnect.
• Do...

SUGGESTEDFABRICSELECTFABRICSTEAMSETTINGDIALSETTINGIRONINGRECOMMENDATIONS
AcrylicO/Off (Dry)SyntheticIron garment inside out
AcetateO/Off (Dry)SyntheticIron garment inside out while still damp.
PolyesterO/Off (Dry)SyntheticIron garment inside out while still damp.
RayonO/Off (Dry)SyntheticIron garment inside out.
SilkO/Off (Dry)SilkIron garment inside out. Use an ironing cloth*
to prevent shine marks.
ViscoseO/Off (Dry)SilkMainly dry iron; steam may be used under
garment manufacturer’s instructions....

FEATURES OFYOURSTEAMMASTER®IRON
1. SPRAY MIST®Release
2.  Covered Water Fill Hole 3. Fabric Select Dial
4. Steam / Self-Clean Lever 
5. SPRAY MIST
®Button
6.  SHOT OF STEAM
®/ Vertical Steam Button
(select models only)
7.  Power Indicator Light / MOTION SMART
®
Auto-Off Indicator
8.  Soft Grip Handle
9.  360° Tangle-Free Swivel Cord (select models only)
10. Retractable Cord  (select models only)
11. Anti-Calcium System (select models only)–
Inside Water Reservoir
12.  See-Through Water Reservoir
13....

IRONINGTIPS
• Always read garment labels and follow the manufacturer’s ironing instructions.
• Sort the articles to be ironed according to the type of fabric.
• You should first iron garments requiring low temperature(e.g., silks and synthetics)
to avoid damaging them with an iron that is too hot.
• If you are unsure of the fabric content of the garment, test a small area, such as a seam
or facing, before ironing a visible area. Start with a low temperature and gradually
increase the heat to find the...

TOFILL THEWATERRESERVOIR
1. Make sure the iron is unplugged. Set the Steam Lever to O/Off (Dry) and the Fabric Select
Dial to OFF. 
2. Lift the Water Fill Hole Cover.
3. Fill water cup with water. Pour water into iron water reservoir. Do not fill
water reservoir
beyond maximum fill level.
WARNING:To prevent the risk of burns, be careful when filling a hot iron with water.
Hot metal parts, hot water and steam can cause injuries.
DRYIRONING
1. Make sure the Steam Lever is turned to the O/Off (Dry)...

USING THEIRON’SSPECIALFEATURES
SPRAYMIST®FEATURE
The SPRAY MIST®feature is a powerful water spray mist that dampens the fabric to aid in
removing wrinkles from heavy fabrics and for setting creases.
To use the SPRAY MIST®Feature:
Press the SPRAY MIST®button firmly.
SHOT OFSTEAM®FEATURE
The SHOT OF STEAM®feature provides an extra burst of steam for deep penetration
of stubborn wrinkles. You can use this feature while Dry or Steam ironing, but
the water
reservoir must be at least 1/4 full of water.
To use...

to Off.
MAINTAININGYOURSTEAMMASTER®IRON
CLEANING THESOLEPLATE
Clean the soleplate if starch or other residue accumulate.
To clean the Soleplate:
1. Allow the iron to cool and then wipe it with a soft, damp cloth. 
WARNING: DO NOT use abrasive cleansers, scouring pads or vinegar to clean the soleplate.
This will damage the finish.
2. Run the iron over an all-cotton cloth to remove any residue.
USING THESELF-CLEANINGFEATURE
You should use the Self-Cleaning feature once a month to maintain the optimal...

1 Year Limited Warranty
Sunbeam Products, Inc, or if in Canada, Sunbeam Corporation (Canada) Limited
(collectively “Sunbeam”) warrants that for a period of one year from the date of purchase,
this product will be free from defects in material and workmanship. Sunbeam,
at its option,will
repair or replace this product or any component of the product found to be defective during
the warranty period. Replacement will be made with a new or remanufactured product or
component. If the product is no longer...