Home > Steinberg > Interface > Steinberg UR28M Operation Manual

Steinberg UR28M Operation Manual

Here you can view all the pages of manual Steinberg UR28M Operation Manual. The Steinberg manuals for Interface are available online for free. You can easily download all the documents as PDF.

Page 11

Panel Controls for the Software Programs
UR28M  Operation Manual11
Main Window
This is the window for configuring the entire signal 
flow. Channel Area
This is the area for configuring the input channel 
settings.

Channel Link
Turns on (lit) and off (dark) the channel link of two 
adjacent channels. When you turn this on, two 
mono channels  will become one stereo channel.
 Level Meter
Indicates the signal level.
 High Pass Filter
Turns on (lit) and off (dark) the high pass filter.
To select the...

Page 12

Panel Controls for the Software Programs
UR28M  Operation Manual12
Channel Strip Insertion Location
Selects the insertion location of the Channel Strip.
 Channel Strip On/Off
Turns the Channel Strip on (lit) and off (dark).
You can apply four Channel Strips to mono 
channels, or two Channel Strips to a stereo 
channel.
 Channel Strip Edit
Opens (lit) and closes (dark) the “Channel Strip” 
(page 19) setup window.
 Effect Type
Indicates the effect type.
 REV-X Send
Adjusts the signal level  which is...

Page 13

Panel Controls for the Software Programs
UR28M  Operation Manual13
Master Area
This is the area for configuring the master channel 
settings.
Level Meter
Indicates the signal level.
 REV-X Send On/Off
Turns the REV-X on (lit) and off (dark).
You can turn this on for one of MIX 1–3.
 REV-X Edit
Opens (lit) and closes (dark) the “REV-X” (page 
22) setup window.
 REV-X Type
Selects the REV-X type.
Option:  Hall, Room, Plate
 REV-X Time
Adjusts the reverb time of the REV-X. This 
parameter links to Room...

Page 14

Panel Controls for the Software Programs
UR28M  Operation Manual14
Setup Window
This is the window for configuring the common 
settings of the device.
CONTROL PANEL
For Windows, this opens the “Control Panel of the 
Audio Driver” (page 8). For Mac, this opens the 
Audio MIDI Setup.
 HPF
Selects the cutoff frequency of the high pass filter.
Option:  120 Hz, 100 Hz, 80 Hz, 60 Hz, 40 Hz
 Input Meter Setting
Selects the analog input  jacks whose input signal 
levels are indicated on the INPUT meter on the...

Page 15

Panel Controls for the Software Programs
UR28M  Operation Manual15

SLIDER MOUSE CONTROL
Selects the method of operating the sliders and 
faders on the dspMixFx UR28M.
Information Window
This window indicates  information about the 
dspMixFx UR28M and the device.
 Version Information
Indicates the version of the firmware and 
software. The letters “x.x.x” and “x.xx” indicate 
the version number.
 Check for update
Checks whether or not you have the latest 
software and firmware version, via the...

Page 16

Panel Controls for the Software Programs
UR28M  Operation Manual16
How to Open the Window
Input Settings Window
The Input Settings window appears in the following 
windows.
• In the Mixer window (Cubase and Cubase Artist 
only)
• In the VST Input Channel Settings window (Cubase  and Cubase Artist only)
• In the VST Audio Channel Settings window (other  Cubase series software)
In the Mixer Window (Cubase and Cubase 
Artist only)
1.[Devices]    [Mixer] to open the Mixer 
window.
2.Click “Show Extended...

Page 17

Panel Controls for the Software Programs
UR28M  Operation Manual17
The Input Settings window appears in the VST Input 
Channel Settings window as shown below.
In the VST Audio Channel Settings Window 
(other Cubase series software)
1.Click the audio track from the track list.
2.Click “Edit Channel Settings” in the audio 
track.
The Input Settings window appears in the VST Audio 
Channel Settings window as shown below.
Hardware Setup Window
[Devices]   [Audio Hardware Setup]
Panel Controls
Input Settings...

Page 18

Panel Controls for the Software Programs
UR28M  Operation Manual18
Channel Strip Insertion Location
Selects the insertion location of the Channel Strip.
You can apply four Channel Strips to mono 
channels, or two Channel Strips to a stereo 
channel.
 Output Position of the Direct Monitoring 
Signal
Indicates the position from which the audio 
signals for monitoring will  be output when turning 
on Direct Monitoring in the device settings on 
Cubase.
 REV-X Edit
Opens the “REV-X” (page 22) setup...

Page 19

Panel Controls for the Software Programs
UR28M  Operation Manual19
Output Routing Window
This is the window for selecting the output signal of 
the output jacks on the device.
S/PDIF OUT
Selects the output signal of the S/PDIF OUT.
Master Levels Window
This is the window for conf iguring the master level of 
the output jacks on the device.
 OUTPUT (A/B/C) MODE SELECT
Selects the function (mode) of the LINE OUTPUT 
A–C. 
There are two modes, Alternate and Independent.
 Master Source
Indicates the LINE...

Page 20

Panel Controls for the Software Programs
UR28M  Operation Manual20
• When using the built-in Channel Strip on Cubase 
series programs, turn on the “Direct Monitoring” 
setting in the program.
• When assigning the Channel Strip of the VST Plug- in version to the effect slot on Cubase series 
programs, select it from  the “Dynamics” category 
(in the case of the default settings).
Screenshot
How to Open the Window
From Dedicated Windows for Cubase Series
Click “Channel Strip Edit”  (page 17) in the section...
Start reading Steinberg UR28M Operation Manual

Related Manuals for Steinberg UR28M Operation Manual

All Steinberg manuals