Steinberg Cubase 4 Remote Control Devices Manual

11
Remote controlling Cubase
In the View section, select Write or “fnct B” to control 
the Write or Read buttons in the Cubase mixer. When 
Write/fnct B is selected, selecting the All button in the 
bottom left section of the CM Motor Mix controls the Write 
All/Read All buttons in the Cubase mixer.
The Auto Enbl button controls Start/Stop in Cubase.
The Suspend button controls the Record function in 
Cubase.
Press the DSP button to move the project cursor to the 
start of the project.
Hold down Shift...

12
Remote controlling Cubase
Fader Set mode EQ1 to EQ4 (e. g. EQ1):
 Page 01 – EQ Low Gain
 Page 02 – EQ Low Frequency 
 Page 03 – EQ Low Q
 Page 04 – EQ Low Enable

 Buttons below dials: bypass EQs
Fader Set mode Send1 to Send8 (e. g. Send1):
 Page 01 – Send1 Level
 Page 02 – Send1 Enable
 Page 03 – Send1 Pre/Post
 Page 04 – Send1 Bus
 Page 05 – Bypass Sends
 Buttons below dials: bypass sends
F2 button: Selected Channel mode EQ:
 Page 1 – Gain, Frequency, Q and Enable for the lo band, 
Gain, Frequency,...

13
Remote controlling Cubase
JL Cooper CS-10
The CS-10 can remote control 32 channels (in groups of 
8). The following CS-10 controls will remote control the 
following parameters for each channel strip:

 Solo and Mute: solo and mute
 Sel: select channel for editing
The following parameters can be remote controlled for each 
selected channel using the six rotary knobs on the CS-10:
The CS-10 function keys 1–4 are used to select chan-
nels 1–32 in groups of 8. 
Function key 1 selects channels 1–8,...

14
Remote controlling Cubase
The MCS-3000 Play, Stop, Record, Rewind and Fast 
Forward transport controls will have the equivalent func-
tionality in Cubase.
Mackie Control
Mackie Control is an automated touch-sensitive control 
surface. It is a nine-fader (eight channels and master) MIDI 
controller that provides in-depth mixing, editing, automa-
tion and navigational control for any supported digital au-
dio workstation.
A special Lexan overlay that shows all Steinberg-specific 
key assignments for the...

15
Remote controlling Cubase
Use the Status button in the Window section to open or 
close the VST Performance window.
Use the Mix button in the Window section to open or 
close the Mixer window.
Use the Mem-Loc button in the Window section to 
open the Marker window.
The Alt button in the Window section is used for user-
assigned functions.
The Undo button in the Keyboard Shortcuts section un-
does the last performed operation in Cubase.
Hold down the Shift button and press Undo to redo the last undone...

16
Remote controlling Cubase
For a description of the functionalities for the F4 button: 
Selected Channel: Inserts, F5 button: Global mode Send 
Effects, F6 button: Global mode Master Effects, F7 but-
ton: Global mode Instruments, see the separate pdf docu-
ment “Mackie Control and Cubase”.
Use the Locate/Numerics buttons to set the project cur-
sor position.
 Immediately after you enter a numeric character, the Mackie 
HUI time display will no longer show the project cursor posi-
tion, but the new...

17
Remote controlling Cubase
 Enter button: set the project cursor to the position according 
to the new value.
 Store Marker button: set the project cursor to the position ac-
cording to the new value, and create a marker at the new 
project cursor position.
With the Num-LED off:
 Use the “1” button for page up (step through pages of one pa-
rameter group).
 Hold down Shift and press the “1” button to jump to the last 
page.
 Use the “6” button for page down.
 Hold down Shift and press the “6” button to...

18
Remote controlling Cubase
Roland MCR-8
The Roland MCR-8 can control 16 mixer channels, plus 
transport control. The “A/B switch” is used to switch be-
tween controlling channels 1–8 and 9–16. The following 
MCR-8 parameters control the equivalent parameters for 
each channel strip:
Fader level, mute, solo and pan.
The following MCR-8 transport controls control the equiv-
alent Cubase functions:
Play, Stop, Record, Rewind, Fast Forward.
Tascam US-428
Specifications
The US-428 can remote control up to...

19
Remote controlling Cubase
Yamaha 01V
The Yamaha 01V can remote control Cubase. Before you 
can initiate remote control operation, the 01V must be set 
up in the following way:
MIDI Parameter Change and Receive must be enabled.
MIDI Control Change and Receive must be disabled.
Device ID / MIDI Channel Receive must be set to “1”.
Local Control should be set to “Off”.
As soon as Local Control is set to “Off”, remote control is enabled.
The 01V remote operation of Cubase is very straightfor-
ward, with...

20
Remote controlling Cubase
Yamaha DM1000v2
The Yamaha DM1000v2 is a digital mixing console that 
provides full automation of virtually all console parameters. 
It is designed to integrate effectively with digital audio 
workstations such as Cubase.
For detailed information about features, parameters, 
etc., please see the documentation which comes with the 
Yamaha DM1000v2.
Yamaha 01v96v2
The Yamaha 01v96v2 is a digital mixing console that pro-
vides full automation of virtually all console parameters....