Standard Horizon Receiver Phantom Series PS2000 Operating Instructions

Page 41 Phantom PS2000
If the reply signal is not received, the transceiver will transmit again.
6. After the second INDIVIDUAL CALL is transmitted,
if the reply signal is not received, “
NO REPLY” notition
will appear. To send the call again, press the [
]
key to select the “
SEND,” then press the
[
CALL(
SET)
MENU]
 key.
7. When an individual call acknowledgment is received,
the established channel is automatically selected and
a ringing tone sounds.
8. Press any key to listen to the channel to make...

 Phantom PS2000 Page 42
11.5.6  Setting Up the Call Waiting Function
Allows the Phantom PS2000 to be setup to reply (ABLE) or set the radio so it
transmits a call that advises the calling vessel the person is UNABLE to reply to the
call at this time. This function is similar to an answering machine. When set up in
UNABLE and a individual call is received the Individual call from the other vessel is
logged in the CALL WAITING directory for you to review and call back at a later time.
1. Press and hold...

Page 43 Phantom PS2000
6. Press the [

]
 or [
]
 key to select the first letter of the name
of the group you want to reference in the directory.
7. Press the [
CALL(
SET)
MENU]
 key to store the first letter in
the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete. The name
can consist of up to eleven characters, if you do not use all
eleven characters press the [
CALL(
SET)
MENU]
 key to move
to the next space. This method can also be used to enter a...

 Phantom PS2000 Page 44
11.6.3 Receiving a Group Call
1. When a group call is received, “RECEIVED GROUP” will ap-
pear on the LCD, and a ringing alarm sound.
2. The radio automatically switches to the requested channel.
3. Press any key to stop the alarm.
4. Press the [

]
 or [
]
 key to see the MMSI of the vessel
transmitting the Group Call.
5. Monitor the channel for the person calling the Group for a
message.
6. If you want to respond, monitor the channel to make sure it is clear, then
press the PTT...

Page 45 Phantom PS2000
1. Press and hold down the [
CALL(
SET)
MENU]
 key
until “
RADIO SETUP” menu appears.
2. Press the [

]
 key to select “
DSC SETUP” menu,
then press the [
CALL(
SET)
MENU]
 key.
3. Press the [

]
 or [
]
 key to select “
POS REQUEST”
menu, then press the [
CALL(
SET)
MENU]
 key.
4. Press the [

]
 or [
]
 key to select “
Au” or “oF.”
In “
Au” mode, after a DSC Position Request is re-
ceived, the radio will automatically transmit your vessels po-
sition. In “
oF” mode, the CMP25...

 Phantom PS2000 Page 46
Position Request DSC signal.
5. After a DSC position request is transmitted, the trans-
ceiver remains on channel 70 until position data is
received from the polled vessel.
6. When the Phantom PS2000 receives the position
from the polled vessel, 
RECEIVED POS REPLY” will
appear on the LCD.
7. Press the [

]
 or [
]
 key to see the name and posi-
tion (LAT/LOG) of the vessel polled vessel.
8. If the Phantom PS2000 does not receive a reply,
the LCD will display “
NO REPLY.” Press...

Page 47 Phantom PS2000
3 Select type of reply function “SEND” or “NO REPLY”
by using the [

]
 or [
]
 key.
4. When “
SEND” is selected, press the
[
CALL(
SET)
MENU]
 key. And your position will be
transmitted to the requesting vessel.
5. To exit from position request display, press the [
16/9]
 key.
11.8  POSITION SEND
The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to an-
other vessel. Your vessel...

 Phantom PS2000 Page 48
11.8.3 Receiving a DSC Position Send Call
When another vessel transmits their vessels location to the PS2000 the follow-
ing will happen:
1. When the Position Send Call is received, “
RECEIVED POS
SEND
” will appear on the LCD and a ringing sound will be
produced.
2. Press any key to stop ringing.
3. Press the [

]
 or [
]
 key to see the name and posi-
tion (LAT/LOG) of the of the vessel transmitting the
Position Send Call. 

Page 49 Phantom PS2000
12  RADIO SETUP
12.1 LCD DIMMER
This selection sets up the display backlight intensity or to turn it off.
1. Press and hold down the [
CALL(
SET)
MENU]
 key until
“
RADIO SETUP” menu appears.
2. Press the [
CALL(
SET)
MENU]
 key, then press the [

]
 or
[
]
 key to select “
DIMMER” menu.
3. Press the [
CALL(
SET)
MENU]
 key.
4. Press the [

]
 or [
]
 key to select the desired level. You will
be able to see the effects of your changes. The dimmer
level can be set from “
0 (off)”...

 Phantom PS2000 Page 50
12.3 TIME OFFSET
This selection sets the time offset between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by pressing the [
NAV]
 key.
1. Press and hold down the [
CALL(
SET)
MENU]
 key until
“
RADIO SETUP” menu appears.
2. Press the [
CALL(
SET)
MENU]
 key, then press the [

]
 or
[
]
 key to select “
TIME” menu.
3. Press the [
CALL(
SET)
MENU]
 key.
4. Press the [

]
 or [
]
 key to select time offset from UTC.
See...