Sony Vpl Es2 Projector User Manual

21Turning Off the Power
Projecting the Picture
on the room temperature or the screen 
angle. In this case, adjust it manually. 
Press the D KEYSTONE key on the 
Remote Commander until “V Keystone” 
appears on the screen, and adjust the 
value with the 
v/V/v/B key. The 
corrected value is effective until the 
power turn off.
 Be careful not to let the projector down 
on your fingers.
 Do not push hard on the top of the 
projector with the powered tilt adjuster 
out. It may be occurred malfunction....

22Turning Off the Power
Do not unplug the AC power cord while 
the fan is still running; otherwise, the fan 
will stop even though the internal heat is still 
high, which could result in a breakdown of 
the projector. (VPL-ES2 only)
 The internal circuitry of the Off & Go 
function may cause the fan to continue to 
operate for a short time even after the I / 
1 
key is pressed to turn off the power and the 
ON/STANDBY indicator changes to red. 
(VPL-CS7 only)
For details, see “Off & Go Function...

23Selecting the Menu Language
Convenient Function
BConvenient Function
Selecting the Menu 
Language
You can select one of fifteen languages for 
displaying the menu and other on-screen 
displays. The factory setting is English.
To change the menu language, proceed as 
follows:
1Plug the AC power cord into a wall 
outlet.
2Press the I / 1 key to turn on the 
projector.
3Press the MENU key.
The menu appears.The menu presently selected is shown as 
a yellow button.
4Press the v or V key to select the 
MENU...

24Security Lock
Security Lock
The projector is equipped with a security 
lock function. When you turn the power of 
the projector on, you are required to input 
the previously set password. If you do not 
input the correct password, you will not be 
able to project the picture.
You will not be able to use the projector if you 
forget your password and the password 
administrator is not available. Be please aware 
that using the security lock can prevent valid 
usage in such cases.
To use the security...

25Other Functions
Convenient Function
To cancel the security lock
1Press the MENU key, then turn off the 
“Security Lock” setting in the 
INSTALL SETTING menu.
2Enter the password.
Enter the password that was set.
If you call the customer service center because 
you have forgotten the password, you will need 
to be able to verify the projector’s serial 
number and your identity.  (This process may 
differ in other countries.)  Once your identity 
has been confirmed, we will provide you with 
the...

26Other Functions
To enlarge the image (Digital Zoom 
function)
You can select a point in the image to 
enlarge.  This function works when a signal 
from a computer is input.
This function does not work when a video 
signal is input.
1Project a normal image, and press the 
D ZOOM + key on the Remote 
Commander.
The digital zoom icon appears in the 
center of the image.
2Move the icon to the point on the 
image you want to enlarge. Use the 
arrow key (
v/V/b/B) to move the 
icon.
3Press the D ZOOM + key...

27Using the MENU
Adjustments and Settings Using the Menu
BAdjustments and Settings Using the Menu
Using the MENU
The projector is equipped with an on-screen 
menu for making various adjustments and 
settings.
Display items
Input signal indicator
Shows the selected input channel.   is 
displayed when no signal is input. You can 
hide this indicator using “Status” in the 
MENU SETTING menu.
Input signal setting indicator
For Input A: Shows “Computer,” 
“Component” or “Video GBR.”
For Video/S Video input:...

28Using the MENU
4Make the setting or adjustment on an 
item.
 When changing the adjustment level:
To increase the number, press the v or 
B key.
To decrease the number, press the V or 
b key.
Press the ENTER key to restore the 
previous screen.
 When changing the setting:
Press the v or V key to change the 
setting.
Press the ENTER or b key to restore 
the previous screen.
When setting the Menu Language, see 
“Selecting the Menu Language” on page 23.
To clear the menu
Press the MENU key. 
The menu...

29The PICTURE SETTING Menu
Adjustments and Settings Using the Menu
The PICTURE SETTING Menu
The PICTURE SETTING menu is used for adjusting the picture or volume. 
Setting items Functions Initial setting value
Picture Mode Selects the picture mode.
Dynamic: Emphasizes the contrast to produce 
a “dynamic” picture.
Standard: Normally select this setting.  If the 
picture has roughness with the “Dynamic” 
setting, this setting reduces the roughness.
The following picture mode can be used for 
VPL-ES2...

30The PICTURE SETTING Menu
Black Level 
Adj.
(VPL-ES2 
only)Using black level adjustment results in a vivid 
image with clearly defined light and dark areas. 
Set the black compensation in accordance with 
the image source.
High: Strong balck compensation
Low: Weak black compensation
Off: No black compensationaccording to an input 
signal
Gamma Mode Selects a gamma correction curve.
Graphics: Improves the reproduction of 
halftones. Photos can be reproduced in natural 
tones.
Text: Contrasts black and...