Sony Vpl Cx150 Projector User Manual

11Preparation
Setting the System Setup
When [System Setup] is selected in the initial display of the setting menu, the [System Setup] 
window is displayed. Select the desired item and press the ENTER (or right) key to activate its 
setting items. To input the desired value for the items, press the ENTER (or right) key. You can 
return to the setting menu with the ENTER (or left) key. Click [OK] to save the settings and 
return to the initial display of the setting menu. If you select [Cancel], the...

12Connection
Connection
Connecting to wired LAN
 For a LAN connection, contact your network 
administrator.
 When the projector and a computer that has a 
different network segment (subnet) are 
connected, set [PC Registration List] (page 
10)  on the projector and [Projector Setting] 
(page 18) on the computer.
Connecting to wireless LAN using 
the computer access point
 For a LAN connection, contact your network 
administrator.
 When the projector and a computer that has a 
different network segment...

13Connection
Connecting to several projectors at 
the same time
* A maximum of 5 projectors can be 
connected at the same time.
 To connect to LAN, contact your network 
administrator.
 5 projectors may not be able to be connected 
at the same time due to the computer.
 When the projector and a computer that has a 
different network segment (subnet) are 
connected, set [PC Registration List] (page 
10)  on the projector and [Projector Setting] 
(page 18) on the computer.
Connecting
1Turn on the power of...

14Connection
 When the projector and a computer that has a 
different network segment (subnet) are 
connected, set [PC Registration List] (page 
10)  on the projector and [Projector Setting] 
(page 18) on the computer.
 A maximum of 100 computers can be 
displayed in the list.
 It may take time to project an image due to 
the computer.
 External monitor signal of notebook type 
computer may not be output when you use 
Projector Station for Air Shot Version 2.
 When [When a connection/Disconnection...

15Connection
Disconnecting
Click the projector button to disconnect the 
project from the computer. 
When one projector is connected
When multiple projectors are 
connected
Names and Functions of the 
Main Window
Computer name My PC
IP address
Projector nameIP addressItems Functions
1[Refresh] 
buttonThe projector list, connected 
computer list, and connectable 
computer list are refreshed 
manually.
2[Option 
Setting] buttonThe [Option Setting] window 
for setting the Projector Station 
for Air Shot...

16Connection
This is used for the settings of Projector 
Station for Air Shot Version 2.
Displaying the setting window of 
Projector Station for Air Shot 
Versio n 2
Click the [] button in the main window 
of Projector Station for Air Shot Version 2. 
The [Option Setting] dialog box appears.
When the computer is not connected to the 
projector, the [Option Setting] dialog box is 
opened.
Names and Functions of the tabs 
on the [Option Setting] dialog box
For the details, click the [ ] button on the 
main...

17Connection
[Profile Setting] tab
The [Profile Setting] tab provides the profile 
settings for connecting to the projector.[Connection Setting] tab
When [Set PC desktop to Projector resolution] 
is checked, the window may be shown outside 
of the display due to the position of the window 
of ProjectorStation for AirShot Version2.
The [Connection Setting] tab provides 
detailed settings for connecting to the 
projector. 
Note 

18Setting/Operating via Web
[Projector Setting] tab
The IP address of the projector must be 
specified when the projector has the 
different network segment (subnet) from the 
computer.
Up to 100 projectors can be entered.
[Others] tab
The [Others] tab provides other settings.
To use the Simple Mode in this version of 
Projector Station for Air Shot Version 2, 
check the check box of [Enable Air Shot V2 
Version 1.x transparent mode].  [Use USB 
Wireless LAN Module as Simple Mode] of 
the [Basic Setting]...

19Setting/Operating via Web
After access, the following display appears.
Click [Information].
You can confirm the current state of the 
projector on the computer. You cannot 
change the settings of the projector. Click [Control].
You can control the projector on the 
computer. The functions of each button 
provide the same functions the button of the 
identical name. 
Click [Network].
You can switch the mode and set each mode.
To switch the mode, select the desired mode 
button and then click [Select]....

20Setting/Operating via Web
Click [Setup].
The Setup menu dialog box appears. 
You can set the Owner information, 
Password, Date and Time, Mail Report, etc.
Click [Apply] in the lower part of each 
window to update the projector to the data 
input in each window.
Owner information 
This information is used for the Mail Report 
function.
Owner
Enter owner information.
Projector
Enter the location of the projector.
Memo
Enter a memo, if required.
Setting the Date and Time
This setting is required for the...