Sony Vpl Cx150 Projector User Manual

3-211-161-13 (1)
Data Projector
Operating Instructions 
for Network
© 2007 Sony Corporation
VPL-CX155/CX125
VPL-CW125 

2
© 2007 Sony Corporation. All rights 
reserved. 
Trademark Notice
• Windows and Microsoft are registered 
trademarks of Microsoft Corporation in the 
United States and other countries.
 Intel and Pentium are the registered 
trademarks of Intel Corporation.
 Air Shot is the trademark of Sony 
Corporation.
 Other system names, product names and 
company names appearing in this manual are 
trademarks or registered trademarks of their 
respective holders. In this manual such 
names are not indicated by ® or...

3Before Operation
Before Operation
This unit is equipped with the network 
presentation and control function.
Any image of a computer, if it is connected 
to a LAN by wired or wireless connection, 
can be projected by connecting a network 
cable to the NETWORK connector (RJ45) 
of the projector.
Operations such as power on/off or input 
selection of the projector or confirmation of 
the situation of the projector such as lamp 
used time is possible far from the projector.
Easy installation
For using the...

4Before Operation
first projector. If you use VPL-CW125 and 
another model at the same time, connect 
VPL-CW125 as the second or third, etc.
The network presentation function supplied 
with VPL-CX155/CX125/CW125 series, 
etc. is compatible with Air Shot Version 2 
supplied with VPL-CX86/CX76.  To use the 
network presentation function and Air Shot 
Version 2 when the application software - 
Projector Station for Air Shot Version 2 
(version 1.xx) - is installed, install the 
Projector Station for Air...

5Preparation
 Microsoft Windows XP Professional 
Edition
 Microsoft Windows Vista Home Basic
 Microsoft Windows Vista Home Premium
 Microsoft Windows Vista Business
 Microsoft Windows Vista Ultimate
Supported display
Color resolution: 16 bit, 24 bit, 32 bit
Usable browser
Internet Explorer 5.0 or higher
Available network
RJ45 (10BASE-T/100BASE-TX)
Projector Station for Air Shot Version 2 will 
not work on some computers and OS even 
though they satisfy the above requirements.
Preparation
For using the...

6Preparation
3Install the software according to the 
“wizard” within the installer.
When you use Windows XP Service 
Pack 2/Vista and the following dialog 
box appears during installation, check 
the [Register automatically] radio button 
and click [Next].
The [Autoconfiguration done] appears 
after the installation is completed.
4To go on projecting the pictures, check 
the [Start Air Shot v2 and connect to 
Projector] check box and click [OK].
With the check, the Projector Station for 
Air Shot Version...

7Preparation
Projector Station for Air Shot Version 2 
starts up automatically.
When you are not going to project the 
pictures, click [OK].
After executing [AutoConfig.exe], start up 
the application with [PjstnASv2.exe].
When you change the computer, execute 
[AutoConfig.exe].
Setting the projector
1Connect the network cable to the 
NETWORK connector of the 
projector.
2Turn on the projector.
3Press the INPUT C or AIR SHOT key 
on the remote commander.
The home display of the network 
presentation...

8Preparation
4Press the ENTER key.
The setting menu display appears.
5Select [Setup] to set network setting 
items.
To use the network function, set [Standby 
Mode] in the Function menu of the projector to 
[Standard].
Projector Setting Items
When the ENTER key is pressed in the home 
display of the network presentation, the 
initial display of the setting menu appears. In 
the initial display, you can switch the mode 
to be used and change each mode settings.
Using the software keyboard
When inputting...

9Preparation
Setting each mode
In the initial display of the setting menu, the left edge of the mode currently used is displayed 
in light blue. You can switch the mode to be used and change the mode name and settings.
xDisplaying the setting items menu (action menu)
You can select the item with 
V or v key and the selected item is highlighted. The status appears 
in the right pane of the window.
Press the ENTER key to display the setting item menu (action menu).
Simple ModeInternet Protocol(IP)
IP...

10Preparation
xDisplaying the mode status
When you select [Status] from the action menu, the status of the mode being used is displayed. 
xChanging the settings
When you select [Setup] from the action menu, the [Network Setting] window of the selected 
mode is displayed, where [Internet Protocol(IP)] and [PC Registration List] settings can be 
changed. Select the desired item and press the ENTER (or right) key to activate its setting items. 
To input the desired value for the items, press the ENTER (or...