Sony Vaio Sony Vaio Vgnx505 Manual

X505 SeriesConfidential
PC Card Connector
Remove the two Screws.
Screw : B4
Disconnect the FPC and then remove the PC Card Connector.
Pull the Connector Section upward to disconnect.
1)2)
Peel off the attachment (one location) and disconnect 
the Harness (one location).
3)
PC Card Connector
Connector positions
1.MS-1-D.11
FPC
Harness (Speaker)
1stModels:  Sheet
Other :  Tape
2[MA]
1st Model 

X505 SeriesConfidential
PC Card Connector Block
Plate
Screw : B4
Screw
Sheet
Remove the two Screws and remove the Plate. Peel off the Sheet (one location).
Push the Detents (two locations) in the arrow direction and 
remove the PC Card Eject.
1)
PC Card Eject
2)
3)
1.MS-1-D.12 

X505 SeriesConfidential
Remove the Screws (at one location) and remove the FPC. 
FPC-8
Screw : B6
1)1.MS-1-D.13
FPC-8 

X505 SeriesConfidential
Disconnect the FPC (Keyboard).
* Raise the lock (brown color) of the Connector forward to release the lock.
Mother Board-1
Disconnect the FPC (Pointing Device).
* Pull the FPC as it is in the arrow direction.
Disconnect the FPC (LED).
*Slide the lock (black color) of the Connector in the arrow direction  to release the lock.
Ring
Remove the Ring (one location).
1) 2)
3) 4)
* Also refer to the next page.
1.MS-1-D.14
FPC (Keyboard)
FPC
FPC 

X505 SeriesConfidential
Mother Board-2
Remove the two Screws and remove the Mother Board.
Mother Board
Screw : B4
5)
Remarks
Sheet* Sheet may possibly be peeled off.Do not lose the Sheet.
1.MS-1-D.15
1st Model
2[MA] 

X505 SeriesConfidential
Peel off the Tape (at one location).
FPC
Release the Detents (at two locations) and disconnect the FPC.
Tape
1)
FPC
FPC
1.MS-1-D.16
2)
3)
Peel off the Tape (at one location).
Tape
2[MA]
From the 2nd Models
5[ADD] 

X505 SeriesConfidential
Remove the Screw (one location).
Keyboard
ScrewB7
Front face
Remove the Cap (one location).
Back face
Remove the three Screws and remove the Pointing Device (one location).
Cap (Pointer)
Screw B7
Pointing Device
Keyboard
1)
2)
3)
Remove the Keyboard while paying attention to the part A.
* It may get hung up on the Boss.
Part A
ƒ{ƒX
4)
1.MS-1-D.17 

X505 SeriesConfidential
Parts of the Palmrest
Remove the Button (one location).
Button
1.MS-1-D.18
Lens (PWR)Cushion
Remove the Lens (one location) and the Cushion (two locations).
Lens (KEY)
Cushion (Speaker L)
Speaker
Remove the Lens (one location), Cushion (one location) 
and the Speaker (one location). 
*  They are secured with adhesive tape.
Adhesive tape
1) 2)
3) 

X505 SeriesConfidential
Update History
Date
Contents
Version No.
2004.06.04
[MA] (Page 5, Page11, Page15, Page16) 
2.00
2[ADD ]---Addition   [ DEL]---Deletion   [ CHG]---Change   [ COR]---Correction   [ MA]---Model Addition
2004.12.22
[CHG] Screw (Page 5)
[ADD] Parts (Page 16)
2.30
5