Sony Vaio Sony Vaio Vgnbx Manual

BX Series
Confidential
Keyboard -2
5)1.MS-1-D.11
Turn over the Keyboard to the front side, and disconnect the FPC.
*Slide the lock lever upward and release the lock.
FPC
Lock Lever 

BX Series
Confidential
LCD Section -1
1)1.MS-1-D.12
Remove the one screw. 
* It secures the lug terminal.
Lug TerminalPeel off the Kapton Tape.
*1st Model --- Three places2nd Model --- Two places
Kapton Tape
1st Model
4[MA]
2nd Model
Kapton (FPC)
2)
Screw: 1st Model - B4 2nd Model - B34[MA] 

BX Series
Confidential
LCD Section -2
5)1.MS-1-D.13
Disconnect the Harness upward and release it from  
the detent (four places).
3)
Disconnect the Harness upward.
Camera Model
Harness
Camera Model
4)
Harness
6)
Peel off the Kapton Tape.
Kapton Tape
Disconnect the Coaxial Cable (two places).
* Disconnect it  vertically.
Coaxial Cable
1st Model
2nd Model4[MA]
1st (Camera) Model
4[MA] 

BX Series
Confidential
LCD Section -3
8)
1.MS-1-D.13(a)
AL Foil (Hinge)
1st (WAN (EXT)) Model
7)4[MA]
4[MA]
Remove the four screws and LCD Section.
Screw: B21LCD Section
Peel off the AL Foil (Hinge). 

BX Series
Confidential
1)1.MS-1-D.14
Remove the Bracket (KB EX).
Bracket (KB EX)
Bracket (KB EX)
2)
Remove the screws.
*1st Model --- 8 places2nd Model --- 12 places
1st Model
2nd Model
4[MA]
Screw: 
Red: 1st Model - B8
2nd Model - B30
Blue-B3
Green: 1st Model - B2 2nd Model - B31 

BX Series
Confidential
Palmrest
1)1.MS-1-D.15
Harness
Turn over the Palmrest to the front side lightly 
and disconnect the Harness (one place) vertically.
Disconnect the FFC.
Then remove the Palmrest.
2)
3)
Bluetooth Model
Felica Model
FFC
Turn over the Palmrest to the front side lightly and slide the lock lever
upward to release the lock. And then Disconnect the FFC.
4)
Remove the three screws.
FFC
Palmrest
Screw: 1st Model - B10 2nd Model - B314[MA] 

BX Series
Confidential
1.MS-1-D.16
2)
Remove the screws.
*INT Model --- Three placesEXT Model --- Five places
Heatsink
Screw:  Red-B3 /
Blue-B8
INT Model
EXT Model
3)
Sheet (AL-Bracket Bay)
Peel off the Sheet (AL-Bracket Bay).
Heatsink -1
1)
1st Model
4[MA]
Heatsink
Harness
Disconnect the Harness.
2nd Model4[MA]
4[MA]
1st Model
4[MA]
4)
4[MA]
Remove the screws.
*INT Model --- Four placesEXT Model --- Five placesHeatsinkScrew:  Red-B3 /
Blue-B30
INT ModelEXT Model
2nd Model 

BX Series
Confidential
Heatsink -2
1.MS-1-D.16(a)
4[MA]
5)
1st (EXT) Model
Harness
Heatsink
4[MA]
Disconnect the Harness.
6)
Heatsink
2
1
Lift the right side of the Heatsink and remove it in the direction 
of the arrow 2. 

BX Series
Confidential
Fan
1.MS-1-D.17
Remove the two screws.
*Use a 4 mm socket wrench for B15.
1)
Fan
Remove the Fan.
2)
Harness
Disconnect the Harness.
3)
Screw: Red-B15 / Blue-B24
[CHG]
31st (INT) Model
[MA] 

BX Series
Confidential
PC Card Connector, Guide (HDD)
1)1.MS-1-D.18
2)
Screw:B10Remove the three screws and the Guide (HDD).
Guide (HDD)
Remove the screws, and remove the PC Card Connector 
while disconnecting the connector. 
* 1st (INT) Model --- Two places Other --- One place
3)
Remove the two screws, and remove the Sink (Choke).
Screw:B3
2nd Model4[MA]
Sink (Choke)
PC Card Connector
Connector1st (INT) Model
Screw: 1st Model - B8 2nd Model - B30
4[MA]
4[MA]