Sony Vaio Pcg Serie Pfg Fx777 Manual

1-7
Confidential
PCG-FX777/FX877 (AM)
9. Speaker Unit, SWX-73 Board
10. SO-DIMM
9Speaker Unit
Speaker Unit
Hood Keyboard
Hood
Keyboard 5SWX-73 Board7Speaker Unit4Screw M2X4 (X5) (Black)
3
1
28Screw M2X4 (X2) (Black) 6Screw M2X4 (X2) (Black)
SWX-73 Board
CN303
SWX-73 Board
CN301
SWX-73 Board
CN302
Projection
Projection Notch Note : When removing the speaker 
unit, be sure not to damage 
the hood keyboard.
Note : To re-install it, align the notch
of the speaker unit with the 
projection of the hood...

1-8
Confidential
PCG-FX777/FX877 (AM)
11. Card Modem (Removing from the bottom)
2Door Modem
4Card Modem1Screw M2X4 Special Head (Black)
3Grip M2 (X2) (Black)
5 

1-9
Confidential
PCG-FX777/FX877 (AM)
12. LCD Section (FX877 Model) – Made by TS –
1. Assy Housing Bezel, LCD Unit
How to release the claw A.
Pull the Assy Housing Bezel 
15SA-Z as shown to release 
the claw A.
Assy Housing Bezel 15SA-Z
Assy Housing Display 15SA-ZA
Order of releasing the clawsC → B → A
Order of locking the clawsA → B → C
Assy Housing Display 15SA-Z
: claw part 1Cover Screw Side (15) (X3)
5Cover Screw Lower 3Cover Screw
    Shaft
3Cover Screw
    Shaft 4+P 2.6X6
    Lock Precision...

1-10
Confidential
PCG-FX777/FX877 (AM)
2. Inverter Unit, FPC, Assy Housing Display, Harness LCD
1 32Inverter Unit
9Assy Housing Display
15SA-Z Inverter Unit
CN2
4FPC 7Screw M2X4 
Special Head (Black)
8Harness LCD
5 6Filament Tape 

1-11
Confidential
PCG-FX777/FX877 (AM)
13. LCD Section (FX777 Model) – Made by HI–
1. Assy Housing Bezel (14 inch)
Order of releasing the clawsc → b → a
Order of locking the clawsa → b → c How to release the claw a
5
a
Pull the Assy Housing Bezel 
14H-Z as shown to release
the claw a.
: claw part
a
b cb
1Cover Screw Lower (X2)
1Cover Screw Upper (X2) 2Screw M2X4 Special
Head (X2) (Black)
2Screw M2X4 Special Head (X2)
(Black)
4Screw M2X4 Special Head (X5) (Black) 4Screw M2X4 Special 
Head (X5) (Black)
67...

1-12
Confidential
PCG-FX777/FX877 (AM)
2. Bracket LCD Left, Bracket LCD Right, LCD Unit (14 inch)
3. FPC, Inverter Unit, Assy Housing Display, Harness LCD
5LCD Unit
2Bracket LCD Right 14 (SA) 4Bracket LCD 
Left 14 (SA)1ACE (M2) +B Lock
(X2) (Silver)  3ACE (M2) +B Lock
(X2) (Silver) 
: claw part
5Screw M2X4 Special Head (Black) 6Screw M2X4 Special Head
(Black)
7Assy Housing Display
14SA-Z4FPC2Inverter Unit
31
0Harness LCD
8 9Filament Tape 

1-13
Confidential
PCG-FX777/FX877 (AM)
1-4.Replacing the CPU
NOTE:
This computer uses either one of the two types of CPU socket.
The CPU locking position and the lock-release position are different depending on the types of the CPU socket.
1. Socket type 1, 2
1. Removing the CPU
2. Installing the CPU
1Align the triangle reference mark of
the CPU with that of the CPU socket
and insert all the pins of the CPU to
the corresponding holes of the CPU
socket.
2Insert a flat-blade screwdriver into the
notch as...

1-14
Confidential
PCG-FX777/FX877 (AM)
2. Socket type 3
1. Removing the CPU
2. Installing the CPU
1Align the triangle reference mark of the CPU with that of the CPU socket and insert all the pins of the CPU to
the corresponding holes of the CPU socket.
2Insert a flat-blade screwdriver into the notch as shown in the illustration and rotate it so that the protrusion
comes to the “L” (lock) position. 1Insert a flat-blade screwdriver into the notch as shown in the illustration and rotate it so that the...

1-15
Confidential
PCG-FX777/FX877 (AM)
(END)
1-5. DIP Switch Setting of the MBX-49 Board
Set the DIP switch on the MBX-49 board (main board) to match with the LCD that is used in this computer, because
several types of LCD are used as shown in the following table and the DIP switch setting differs depending
on the LCD type.
MODEL
FX877
FX777
Name of LCD
TS
HI
Part  No.
A-8058-271-A
A-8025-245-A
DIP switch setting
The upper position where ON indication is
shown is the ON position . The lower
position is...

MEMO