Sony VAIO F22 VPCF22CFX User Manual

21nN Getting Started >
Using the Battery Pack
3Slide the battery pack diagonally into the battery compartment until the projection (2) on either side of the battery 
compartment fits into the U-shaped cut (3) on either side of the battery pack.
4Push the battery pack down into the compartment until it clicks into place.
5Slide the battery LOCK switch outward to secure the battery pack on the computer. 

22nN Getting Started >
Using the Battery Pack
To remove the battery pack
!You will lose all unsaved data if you remove the battery pack while your computer is on and not connected to the AC adapter.
1Turn off the computer and close the LCD screen lid.
2Slide the battery LOCK switch (1) inward.
3Slide and hold the battery RELEASE latch (2) inward, put your fingertip underneath the tab (3) on the battery pack, and 
lift the battery pack in the direction of the arrow, and then slide it away from the...

23nN Getting Started >
Using the Battery Pack
Charging the Battery Pack
The battery pack supplied with your computer is not fully charged at the time of delivery.
To charge the battery pack
1Install the battery pack.
2Connect the computer to a power source with the AC adapter.
The charge indicator light is on while the battery pack is charging. When the battery pack charges close to the maximum 
charge level you selected, the charge indicator turns off.
!Charge the battery pack as described in this...

24nN Getting Started >
Using the Battery Pack
✍Keep the battery pack in your computer while it is directly connected to an AC power source. The battery pack continues to charge while you are using 
the computer.
When the battery pack is running out of power and both the charge and power indicator lights blink, you should either connect the AC adapter to 
recharge the battery pack or shut down your computer and install a fully charged battery pack.
Your computer is supplied with a lithium ion battery pack...

25nN Getting Started >
Using the Battery Pack
Checking the Battery Charge Capacity
The battery charge capacity gradually decreases as the number of battery charging increases or the duration of use of the 
battery pack extends. To get the most out of the battery pack, check the battery charge capacity and change the battery 
settings.
To check the battery charge capacity
1Click Start, All Programs, and VAIO Control Center. 
2Click Power Management and Battery.
✍Additionally, you can enable the battery...

26nN Getting Started >
Using the Battery Pack
Extending the Battery Life
When your computer is running on battery power, you can extend the battery life using the following methods.
❑Decrease the LCD brightness of your computer screen.
❑Use the power saving mode. See Using the Power Saving Modes (page 28) for more information.
❑Change the power saving settings on the Power Options. See Using the VAIO Power Management (page 102) for more 
information.
✍For more information on how to extend the battery...

27nN Getting Started >
Shutting Down Your Computer Safely
Shutting Down Your Computer Safely
To avoid losing unsaved data, be sure to shut down your computer properly, as described below.
To shut down your computer
1Turn off any peripherals connected to the computer.
2Save your data and close all running software applications.
3Click Start and the Shut down button.
After a short time, the computer automatically turns off. Make sure the power indicator light turns off.
  

28nN Getting Started >
Using the Power Saving Modes
Using the Power Saving Modes
You can take advantage of the power management settings to conserve battery life. In addition to the normal operating mode, 
your computer has two distinct power saving modes to suit your preference: Sleep and Hibernate.
!If you do not intend to use your computer for an extended period of time while it is disconnected from an AC power source, place the computer into 
Hibernate mode or turn it off.
If the battery pack runs...

29nN Getting Started >
Using the Power Saving Modes
Using Sleep Mode
To activate Sleep mode
Click Start, the arrow   next to the Shut down button, and Sleep.
To return to Normal mode
❑Press any key.
❑Press the power button on your computer.
!If you press and hold the power button for more than four seconds, your computer will turn off automatically. You will lose all unsaved data.
  

30nN Getting Started >
Using the Power Saving Modes
Using Hibernate Mode
To activate Hibernate mode
Press the Fn+F12 keys.
Alternatively, you can click Start, the arrow next to the Shut down button, and Hibernate.
!Do not move your computer before its power indicator light turns off.
To return to Normal mode
Press the power button.
!If you press and hold the power button for more than four seconds, your computer will turn off automatically.