Sony Shake 7 User Manual
Have a look at the manual Sony Shake 7 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
4-451-239-11(1) model name [SHAKE-7] [4-451-239-11(1)] GB filename[D:\NORMS JOB\SONY HA\SO120050\SHAKE- 7\4451239111_GB\01COV.fm]masterpage:Covmodel name [SHAKE-7] [4-451-239-11(1)] GB SHAKE-7 Getting Started USB Transfer Tuner Bluetooth Sound Adjustment Disc/USB Playback Other Operations Additional Information HOME AUDIO SYSTEM Operating Instructions
model name [SHAKE-7] [4-451-239-11(1)] GB 2GB filename[D:\NORMS JOB\SONY HA\SO120050\SHAKE- 7\%1239111_GB\REG.fm]masterpage:Left To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles). To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. This equipment has been tested and found to comply with the limits set out in the EMC Directive using a connection cable shorter than 3 meters. CAUTION The use of optical instruments with this product will increase eye hazard. This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior.When unpacking or handling a big and/or heavy speaker, be sure to handle the unit with two or more persons. Dropping the unit may cause personal injury and/or property damage. License and Trademark Notice • “WALKMAN” and “WALKMAN” logo are registered trademarks of Sony Corporation. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Android is a trademark of Google Inc. All other trademarks and registered trademarks are of their respective holders. In this manual, ™ and ® marks are not specified. WARNING
model name [SHAKE-7] [4-451-239-11(1)] GB 3GB filename[D:\NORMS JOB\SONY HA\SO120050\SHAKE- 7\%1239111_GB\TOC.fm]masterpage:Right Table of Contents Guide to parts and controls ..........4 Getting Started Hooking up the system securely ........................................8 Positioning the speakers...............9 Setting the clock.........................10 Disc/USB Playback Playing a disc .............................10 Before using the USB device with this system..........................10 Playing a USB device ................11 Searching a track or audio file (Track Search)............................11 Using play mode ........................12 USB Transfer Transferring music .....................13 Tuner Listening to the radio .................16 Bluetooth About the Bluetooth wireless technology ..................................17 Listening to music wirelessly on a Bluetooth device ......................17 Setting the Bluetooth audio codecs.........................................21 Setting/Canceling Bluetooth standby mode .............................21 Sound Adjustment Adjusting the sound .................. 22 Creating your own sound effect.......................................... 22 Creating a party atmosphere (DJ EFFECT) ............................ 22 Other Operations Singing along ............................ 23 Changing the illumination pattern and color........................ 23 Using the timers ........................ 23 Changing the display................. 25 Using optional equipment ......... 25 Deactivating the buttons on the unit (Child Lock)....................... 26 Additional Information Playable discs ............................ 26 Websites for compatible devices ....................................... 27 Troubleshooting ........................ 27 Messages ................................... 32 Precautions ................................ 33 Specifications ............................ 34
model name [SHAKE-7] [4-451-239-11(1)] GB 4GB filename[D:\NORMS JOB\SONY HA\SO120050\SHAKE- 7\%1239111_GB\04PLA.fm]masterpage:Left Guide to parts and controls This manual mainly explains operations using the remote control, but the same operations can also be performed using the buttons on the unit having the same or similar names. Unit * When pressing the buttons, press on the printings of the buttons as shown below. CDE DF H B A RQDONM L K J I G P
model name [SHAKE-7] [4-451-239-11(1)] GB 5GB filename[D:\NORMS JOB\SONY HA\SO120050\SHAKE- 7\%1239111_GB\04PLA.fm]masterpage:Right Remote control RM-AMU163 1 "/1 (on/standby) Turn on the system, or set it to standby mode. B FLANGER, ISOLATOR, SOUND FLASH, PHASER (page 22) Select the DJ EFFECT type. C MUSIC, MOVIE/GAME, FOOTBALL Select the preset sound effect (page 22). Unit: BASS BAZUCA (page 22) Select the BASS BAZUCA effect. D /// Select the menu items. +/– (select folder) Select a folder on an MP3 disc or a USB device.m/M (rewind/fast forward) Hold down to find a point in a track or file during playback. ./> (go back/go forward) Select a track or file. TUNING+/– Tune to the station you want. x (stop) Stop playback. Press twice to cancel resume playback of the USB device. Unit: ENTER Remote control: Enter the settings. Unit: NX (play/pause) Remote control: N (play)*, X (pause) Start or pause playback. To resume playback, press NX or N. E Unit: VOLUME/DJ CONTROL Adjust the volume. Adjust the DJ EFFECT level (page 22). You cannot use this knob to adjust the volume when the DJ EFFECT is activated. Remote control: VOLUME +/–* Adjust the volume. Remote control: DJ CONTROL +/– Adjust the DJ EFFECT level. F Disc tray G OPTIONS Enter or exit options menu. H Z OPEN/CLOSE Insert or eject a disc. S A C U E D I B J D Y X W T V EISOLATOR MUSICFOOTBALL CDFUNCTIONUSB FLANGER PHASER MOVIE/GAME SOUND FLASH
model name [SHAKE-7] [4-451-239-11(1)] GB 6GB filename[D:\NORMS JOB\SONY HA\SO120050\SHAKE- 7\%1239111_GB\04PLA.fm]masterpage:Left I LED PATTERN (page 23) Change the illumination pattern on the speakers and the unit. LED COLOR (page 23) Change the illumination color on the speakers and the unit. J CD Select the CD function. Unit: USB/USB SELECT Remote control: USB Select the USB function. Select the USB device connected to the A or B port during USB function. Unit: TUNER/BAND Select the TUNER function. Select the FM or AM band during TUNER function. Unit: AUDIO IN Select the TV/DVD/SAT or PC/GAME function. Remote control: FUNCTION Select a function. K Remote control sensor L Display panel M REC TO USB B Transfer onto the optional USB device which is connected to the B port. N B (REC/PLAY) (USB) port Connect and transfer to an optional USB device. B indicatorO MIC jack Connect a microphone. MIC LEVEL (MIN/MAX) Adjust the microphone volume. P A (PLAY) (USB) port Connect an optional USB device. A indicator Q (N-Mark) (page 19) Near Field Communication (NFC) touchpoint indication. R BLUETOOTH (page 17) Press to select Bluetooth function. Hold down to activate Bluetooth pairing during Bluetooth function. S SLEEP (page 23) Set the Sleep Timer. T REPEAT/FM MODE Listen to a disc, a USB device, a single track or file repeatedly (page 13). Select the FM reception mode (monaural or stereo) (page 16). U DISPLAY Change the information on the display panel. V SEARCH/TUNER MEMORY Enter or exit search mode. Preset the radio station (page 17). W CLEAR Delete the last step from the program list.
model name [SHAKE-7] [4-451-239-11(1)] GB 7GB filename[D:\NORMS JOB\SONY HA\SO120050\SHAKE- 7\%1239111_GB\04PLA.fm]masterpage:Right X TIMER MENU (page 10, 24) Set the clock and the timers. Y PLAY MODE/TUNING MODE Select the play mode of an AUDIO CD, MP3 disc or a USB device (page 12). Select the tuning mode (page 16). * The VOLUME + and N buttons have a tactile dot. Use the tactile dot as a reference when operating the system.
model name [SHAKE-7] [4-451-239-11(1)] GB 8GB filename[D:\NORMS JOB\SONY HA\SO120050\SHAKE- 7\%1239111_GB\05CON.fm]masterpage:Left Hooking up the system securely AAntennas Find a location and an orientation that provide good reception when you set up the antennas. Keep the antennas away from the speaker cords, the power cord and the USB cable to avoid picking up noise. BSpeakers The speaker connectors are color-coded with their respective speaker terminals on the unit. Example: Notes Be sure to use only the supplied speakers. When connecting speaker cords, insert the connector straight into the terminals. Getting Started IMPEDANCE USE 4ΩTWEETERS/WOOFERSSUBWOOFERS MID SPEAKERSLED SPEAKERIMPEDANCE USE 4 IMPEDANCE USE 5L R L RRL R L L R ANTENNAFM/AMTV/DVD/ SATPC/ GAMEAUDIO IN A N TE NN AFM/AM AM loop antennaExtend the FM lead antenna horizontally IMPED ANCE USE 4ΩTWE ETERS/WOOFERSL RWhite
model name [SHAKE-7] [4-451-239-11(1)] GB 9GB filename[D:\NORMS JOB\SONY HA\SO120050\SHAKE- 7\%1239111_GB\05CON.fm]masterpage:Right Getting Started –LED SPEAKER terminals Connect the LED SPEAKER connector of the speaker to this terminal. The lighting on the speakers will react according to the music source. You can select the illumination pattern and color according to your preference (page 23). Example: CAUDIO IN jacks Use an audio cord (not supplied) to connect to the audio output jacks of the following equipment. The sound is output through this system. –TV/DVD/SAT L/R Connect to a TV or an audio/video equipment. –PC/GAME L/R Connect to a computer or gaming device. DPower Plug the power cord into a wall socket. The demonstration appears in the display panel. Press "/1 to turn on the system and the demonstration automatically ends. If the supplied adaptor on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adaptor).Insert the two supplied R6 (size AA) batteries, matching the polarities shown below. Notes Do not mix an old battery with a new one or mix different types of batteries. If you do not use the remote control for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion. Positioning the speakers To obtain optimum performance from the system, we recommend you to place the speakers as shown below. AUnit BSpeaker (left) CSpeaker (right) LED SPEAKER L R Inserting batteries 4545 A BC 0.3 m 0.3 m
model name [SHAKE-7] [4-451-239-11(1)] GB 10GB filename[D:\NORMS JOB\SONY HA\SO120050\SHAKE- 7\%1239111_GB\06BAS.fm]masterpage:Left Setting the clock You cannot set the clock in Power Saving Mode. 1Press "/1 to turn on the system. 2Press TIMER MENU. If “PLAY SET” appears in the display panel, press / repeatedly to select “CLOCK SET”, then press . 3Press / repeatedly to set the hour, then press . 4Press / repeatedly to set the minutes, then press . Playing a disc 1 Press CD. 2Press Z OPEN/CLOSE on the unit. 3Load a disc with the label side facing up on the disc tray. 4Press Z OPEN/CLOSE on the unit to close the disc tray. Do not forcibly push the disc tray to close it as this may cause a malfunction. 5Press N to start playback. Before using the USB device with this system Check the websites for the information about compatible USB devices (page 27). To select the playback source or transferring destination (USB memory select) If the USB device has more than one memory (for example, internal memory and a memory card), you can select which memory to use as a playback source or transferring destination. Use the buttons on the unit to perform this operation. Disc/USB Playback When you play back an 8 cm disc such as a CD single, place it on the inner circle of the tray