Sony Rht G800 Hdmi Control Guide

© 2007 Sony Corporation
3-093-228-21(2)
Theatre Stand 
System
HDMI CONTROL Guide
RHT-G800
 

2GB
To use ‘BRAVIA’ Theatre Sync, set the HDMI 
CONTROL function as explained below.
By connecting Sony components that are 
compatible with the HDMI CONTROL function 
with an HDMI cable (not supplied), operation is 
simplified as below:
 One-Touch Play: When you play back a 
component such as a DVD/Blu-ray Disc 
player, the stand and the TV are turned on 
automatically and switch to the appropriate 
HDMI input.
 System Audio Control: While watching TV, 
you can select to output the sound from the TV...

3GB
 We recommend that you do not use components 
which have an HDMI output jack and components 
which do not have an HDMI output jack at the same 
time. If you do so, the HDMI CONTROL function 
may not work.
We recommend you use the Input SYNC function 
(Programming the remote for TV operation) if you 
use components which have an HDMI output jack, and components which do not have the HDMI output 
jack at the same time. 
Connecting the TV and the other component
TV monitor, projector, etc.
Audio signal...

4GB
Before you use the HDMI CONTROL function, 
be sure you have performed the following 
procedures.
For details on setting the TV and connected 
component, see the operating instructions of 
them.
1Make sure that the stand is connected 
to the TV and connected component 
(which should be compatible with the 
HDMI CONTROL functions) using a 
HDMI cable (not supplied).
2Turn on the TV, and set the HDMI 
CONTROL to “ON,” then switch to the 
HDMI input connected to the stand.
3Press ?/1 to turn on the...

5GB
Play back a connected component.
The stand and the TV are turned on 
automatically and switch to the appropriate 
HDMI input.
 Depending on the TV, the start of the content may not 
be output.
 You can enjoy the DVD player (recorder) connected 
to the stand, even if you turn the stand off. The power 
indicator lights up in orange at this time.
You can enjoy the TV sound from the speakers 
of the stand by means of a simple operation. For 
details, see the operating instructions of the TV.
Press ?/1 to...

6GB
Using the input buttons of the 
remote of the stand
The input buttons (TV (white), DVD/BD, SAT, 
AUDIO) work as follows when the HDMI 
CONTROL is set to “ON.”
 DVD/BD, SAT: Since the input of the TV is 
also switched automatically, you can watch the 
image of the selected component on the TV 
simply by pressing the buttons.
 TV, AUDIO: The input of the TV does not 
switch automatically.
Watching a TV program
Press TV (white) or TV (orange), then select the 
program you want to watch using the number...

7GB
If you experience any of the following 
difficulties while using the HDMI CONTROL 
function, use this troubleshooting guide to help 
you remedy the problem.
The HDMI CONTROL function does not work.
 Check the HDMI connection (page 3).
 Make sure “HDMI CTRL” is set to “CTRL 
ON” in AMP menu.
 Make sure the connected component is 
compatible with the HDMI CONTROL 
function.
 Check the HDMI CONTROL settings on the 
connected component. See the operating 
instructions supplied of the connected...

Sony Corporation   Printed in Malaysia