Sony Rht G11 Operating Instructions

21GB
Tuner Functions
To turn off the radio
Press "/1 to turn off the stand.
To change to another function, press INPUT 
SELECTOR +/–.
To listen to non-preset radio 
stations
Use manual or automatic tuning in step 2. 
For manual tuning, press TUNING +/– 
repeatedly.
For automatic tuning, press and hold TUNING 
+/–. The automatic tuning stops when the stand 
tunes in a station. To stop the automatic tuning 
while automatic tuning is in progress, press 
TUNING +/–.
If an FM program is noisy
If an FM...

22GB
Each time you press DISPLAY, the station name 
and the frequency alternate in the front panel 
display.
 The station name is displayed if you have entered a 
name for a preset station.
 The frequency in the front panel display switches to 
the station name after several seconds.
What is the Radio Data 
System?
The Radio Data System (RDS) is a broadcasting 
service that allows radio stations to send 
additional information along with the regular 
program signal. This tuner offers convenient 
RDS...

23GB
Surround FunctionSelecting the sound field
This stand can create multi-channel surround 
sound. You can select one of stand’s optimized 
pre-programmed sound fields.
Press SOUND FIELD +/–.
The present sound field appears in the front panel 
display.
Each time you press SOUND FIELD +/–, the 
display changes cyclically as follows:
STANDARD y MOVIE y DRAMA y 
NEWS y SPORTS y GAME y MUSIC 
y 2CH STEREO y P.AUDIO y 
STANDARD …
Available sound fields
* These sound fields are not available when 
“DMPORT”...

24GB
By connecting Sony components that are 
compatible with “BRAVIA” Sync via an HDMI 
cable (not supplied), operation is simplified as 
below:
 One-Touch Play (page 25)
 System Audio Control (page 26)
 System Power Off (page 26)
“BRAVIA” Sync is compatible with Sony TVs, 
Blu-Ray Disc/DVD players, AV amplifiers, etc., 
with the Control for HDMI function.
CONTROL FOR HDMI is a mutual control 
function standard used by CEC (Consumer 
Electronics Control) for HDMI (High-Definition 
Multimedia Interface)....

25GB
“BRAVIA” Sync Features
If “COMPLETE” does not appear 
after performing the steps above
Set the Control for HDMI function to on for both 
the stand and the connected component 
individually.
1Press AMP MENU.
2Press X/x repeatedly until “SET HDMI” 
appears, then press   or c.
3Press X/x repeatedly until “CTRL 
HDMI” appears, then press   or c.
4Press X/x to select “ON.”
5Press AMP MENU.
The AMP menu turns off. The Control for 
HDMI function is set to on.
6Select the input of the stand connected 
to...

26GB
You can enjoy the TV sound from the speakers 
of the stand by means of a simple operation. You 
can also adjust the volume and turn off the sound 
of the stand using the TV remote. For details, 
refer to the operating instructions of the TV.
Press ?/1 to turn on the stand.
The sound is output from the speaker of the 
stand. Sound output reverts to the TVs speaker 
when you turn the stand off.
 When the TV is turned on before this stand is turned 
on, the TV sound will not be output for a moment....

27GB
“BRAVIA” Sync Features
If a “BRAVIA” Sync-compatible TV is 
connected to the stand, and the TV is turned off, 
HDMI signal transmission stops, and power 
consumption is reduced.
The default setting is “AUTO.”
 This function is available only when “CTRL HDMI” 
is set to “ON.”
1Press AMP MENU.
2Press X/x repeatedly until “SET HDMI” 
appears, then press   or c.
3Press X/x to select “PASS THRU,” then 
press  or c.
4Press X/x to select the setting.
 AUTO: When the TV is turned on while 
the stand is in...

28GB
Using the AMP menu
You can set the following items with AMP 
MENU on the remote.
The default settings are underlined.
* See ““BRAVIA” Sync Features” (page 24).
** This setting appears only when “CTRL HDMI” is 
set to “ON.”
1Press AMP MENU to turn on the AMP 
menu.
2Press C/X/x/c repeatedly to select the 
item and the setting.
3Press AMP MENU to turn off the AMP 
menu.
Advanced Settings
Settings and adjustments 
using the amplifier menu
AMP MENU
LEVELCNT 
LEVEL–6, –5, … 0,
… +5, +6
SW LEVEL –6, –5, …...

29GB
Advanced Settings
 These settings are retained even if you disconnect the 
AC power cord (mains lead).
The following pages show details for each 
setting.
Setting the speaker level (CNT 
LEVEL, SW LEVEL)
You can adjust the level and the balance of the 
speaker and subwoofer.
1Select “LEVEL” in the AMP menu, then 
press  or c.
2Select “CNT LEVEL” or “SW LEVEL,” 
then press   or c.
 CNT LEVEL: Adjusts the speaker level.
 SW LEVEL: Adjusts the subwoofer 
level.
3Select the parameter you want.
The...

30GB
Enjoying multiplex broadcast 
sound (DUAL MONO)
You can enjoy multiplex broadcast sound when 
the stand receives an AC-3 multiplex broadcast 
signal.
 To receive an AC-3 signal, you need to connect a 
digital satellite tuner to the stand with an optical cable 
or coaxial cable, and set the digital output mode of the 
digital satellite tuner to AC-3.
1Select “AUDIO” in the AMP menu, then 
press  or c.
2Select “DUAL MONO,” then press   
or c.
3Select the setting.
 MAIN:  Plays back only the main...