Sony Projector Vpl Vw80 User Manual
Here you can view all the pages of manual Sony Projector Vpl Vw80 User Manual. The Sony manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
21 Connections and Preparations Tip When connecting an HD-Dsub15 pin cable, set “Input-A Signal Sel.” in the Setup menu to “Auto” or “Computer.” If the input signal does not appear properly, set it to “Computer.” (1 pages 54, 67) When connecting an HDMI cable, make sure the V mark on the upper part of the HDMI input of the projector and the v mark on the connector of the cable is set at the same position. If you set your computer, such as a notebook type, to output the signal to both...
Page 22
22 Step 3: Adjusting the Picture Position Project an image on the screen and then adjust the picture position. Tip The ?/1 (ON/STANDBY), INPUT, LENS, MENU, and M/m/
Page 23
23 Connections and Preparations Tips You can select the desired language for the menu screen. For details, refer to “Step 4: Selecting the Menu Language”. (1 page 28) When “Auto Input Search” is set to “On” in the Function menu, the input terminal with effective signals is automatically displayed by pressing INPUT. (1 page 56) 2Press the ?/1 (ON/STANDBY) switch to turn on the projector. The lens protector will open. The ON/STANDBY indicator flashes in green, and then lights in green. When the...
Page 24
24 Tip When “Lens Control” is set to “Off” on the Installation menu, you cannot adjust the picture position. (1 page 57) When “Test Pattern” is set to “Off” on the Function menu, the test pattern is not displayed. (1 page 56) To adjust the horizontal position Press
Page 25
25 Connections and Preparations To adjust the vertical position Press M/m. The picture projected on the screen moves up or down by a maximum of 65% of the screen height from the center of the lens. The range to move the picture projected on the screen can be adjusted only within the octagon area illustrated below. In this connection, see “Positioning the Projector and a Screen” (1 page 14) as well. Note 65% 1 screen height 65% Side view : Picture position when moving the picture upward at maximum...
Page 26
26 Tip When “Lens Control” is set to “Off” on the Installation menu, you cannot adjust the picture size and the focus. (1 page 57) When “Test Pattern” is set to “Off” on the Function menu, the test pattern is not displayed. (1 page 56) Be sure to adjust the picture size and the focus by using buttons on the remote control or the control panel of the projector. Never make adjustments by directly turning the lens with your hands, which may cause damage or malfunction to the projector. 6Adjust the...
Page 27
27 Connections and Preparations To adjust the tilt of the installation surface If the projector is installed on an uneven surface, use the adjusters to keep the projector level. Be careful not to catch your finger when turning the adjusters. Note AdjustersTurn to adjust.
Page 28
28 Step 4: Selecting the Menu Language You can select one of 16 languages for displaying the menu and other on-screen displays. The factory default setting is English. To change the current menu language, set the desired language with the menu screen. 1Press MENU. The menu appears. 1 MENU button 2,3,4 M/m/
Page 29
29 Connections and Preparations 2Press M/m to select the Setup menu, and press , or . The setting items of the selected menu appears. 3Press M/m to select “Language,” and press , or . 4Press M/m/
Page 30
30 This section describes how to operate the projector to view the picture from the equipment connected to the projector. It also describes how to adjust the quality of the picture to suit your taste. Projecting the Picture on the Screen * Set the “Input-A Signal Sel.” setting in the Setup menu according to the signal input. When you set it to “Auto,” and cannot display the picture properly, select an appropriate signal according to the input signal. (1 pages 54, 60) Tips When “Auto Input Search”...