Sony Projector Vpl Vw100 User Manual

51 GBInstallation Menu
Using the Menus
Installation Menu
The Installation menu is used for changing the installation settings.
V KeystoneCorrects the vertical trapezoidal distortion of the picture.
When the bottom of the trapezoid is longer than the top ( ): 
Sets a lower value (– direction) 
When the top of the trapezoid is longer than the bottom ( ): 
Sets a higher value (+ direction).
Note
Depending on the picture position adjusted with the lens shift 
feature, the aspect ratio of the picture may...

GB 52Installation Menu
Network Setting
You can set internet protocols such as IP address, Subnet Mask, Default 
Gateway, and DNS Server when accessing the projector from a computer or 
using “ImageDirector2” application supplied.
After completing all of settings, select “Apply” using m button, then press 
ENTER.
To use the Network setting function, 
set “Standby Mode” to “Standard” in the 
Function  menu. 
( 1  page 50)
High Altitude Mode Use this item when using the projector at high altitudes.
Off:...

53 GBSetup Menu
Using the Menus
Setup Menu
The Setup menu is used to change the factory preset settings.
StatusSets whether or not the on-screen display is displayed.
Set to “Off” to turn off the on-screen displays except for the menus, 
message when turning off the power, and warning messages.
LanguageSelects the language used in the menu and on-screen displays. 
Available languages are: English, Dutch, French, Italian, German, 
Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese, 
Chinese...

GB 54Setup Menu
Color SystemSelects the color system of the input signal.
Au t o : Selects the color system of the input signal automatically 
from among NTSC
3.58, PAL, SECAM, NTSC4.43, PAL-M, 
PA L - N ,  o r  PA L 6 0 .
“NTSC
3.58”–“PA L - N”: Allows you to set the color system to the 
selected system manually.
Note
Normally, set this to “Au to.” If the picture is distorted or colorless, 
select the color system appropriate for the input signal. 

55 GBInformation Menu
Using the Menus
Information Menu
The Information menu displays the model name, serial number, the horizontal 
and vertical frequencies of the input signal and the cumulated hours of usage 
of the lamp.
You cannot change the displays listed above.
This projector has 42 types of preset data for input signals (the preset memory). 
When the preset signal is input, the projector automatically detects the signal 
type and recalls the data for the signal from the preset memory to adjust it...

GB 56Accessing the Projector from a Computer / Checking the Status of the Projector
Accessing the 
Projector from a 
Computer
You can check the present status of the 
projector on a computer display and control 
the projector from a computer.
Confirm that the projector and computer are 
connected to the router/hub with the LAN 
cables, then turn on the projector, computer 
and router/hub.
1Start Internet Explorer 5.0 (or 
later version) on your computer.
2Type “http://xxx.xxx.xxx.xxx (the 
IP address of...

57 GBControlling the Projector from a Computer / Setting up the Projector
Operating the Projector from a Computer
Controlling the 
Projector from a 
Computer
Click “Control.” You can perform various 
adjustments and settings of the projector on 
a computer display.
The functions of the buttons in the windows 
are the same as those on the remote control 
supplied with the projector.
Setting up the 
Projector
Click “Setup.” The Password Properties 
dialog box appears. The name of the “User” 
account is...

GB 58Setting up the Projector
Setting passwords for 
“Administrator” and “User”
Click “Password.” You can set passwords 
for each “Administrator” and “User.” The 
name of the “Administrator” account is 
preset to “root” at the factory. It cannot be 
changed.
Advanced setting
Click “ADVANCED MENU” to display the 
Advertisement button, PJ Talk button and 
SNMP button. These settings are mainly for 
professional use. Detailed information on 
Advertisement button and PJ Talk button are 
indicated by the...

59 GBTroubleshooting
Others
This section describes how to solve the problems, how to replace a lamp and 
air filter, etc.
Troubleshooting
If the projector appears to be operating erratically, try to diagnose and correct 
the problem using the following instructions. If the problem persists, consult 
with qualified Sony personnel.
Power
Picture
Others
Symptom Cause and Remedy
The power is not turned on.cClose the top cover and the lamp cover securely. (1 page 63)
cReset the lamp release lever to its...

GB 60Troubleshooting
On-screen display
Remote control
The LAMP/COVER or TEMP/FAN indicator lights up or flashes if there is 
any trouble with your projector.
The picture is not clear.cAdjust the focus. (1 pages 25 and 31)
cCondensation has accumulated on the lens. Leave the projector 
for about two hours with the power on.
The fan is noisy.cCheck the setting of “High Altitude Mode” in the Installation 
 menu. (1 page 52)
The picture flickers.cAdjust “Dot Phase” for “Adjust Signal” in the Signal   menu...