Sony Projector Vpl Px30 User Manual
Here you can view all the pages of manual Sony Projector Vpl Px30 User Manual. The Sony manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
11 (GB) Location and Function of Controls Control panel 1 VOL +/Ð keys Adjust the volume of the built-in speakers and output level of the AUDIO jack. + : Increases the volume. Ð : Decreases the volume. 2 Arrow keys (M/m/
Page 12
12 (GB) Connector panel 1 INPUT A connectors 1DIGITAL RGB/5BNC/RGB switch: Selects DIGITAL RGB, 5BNC or RGB on INPUT A connectors. Select the appropriate position depending on the input signal. DIGITAL RGB: Signal input from DIGITAL RGB connector. 5BNC: Signal input from the 5BNC connector. RGB: Signal input from the RGB connector. 2RGB input connector (HD D-sub 15-pin, female): Connects to the monitor output on a computer using the supplied cable. This connector only accepts signals from a computer....
Page 13
13 (GB) ......................................................................................................................................................................................................... 1) Macintosh is a registered trademark of Apple Computer, Inc. Remote Commander The keys which have the same names as on the control panel function identically. You can control a connected computer using the Remote Commander. For details, see ÒConnecting with a ComputerÓ on page 15 (GB). Notes on...
Page 14
14 (GB) Location and Function of Controls / Installing the Projector Be sure to install the battery from the # side. qj MUTING keys Cut off the picture and sound. PIC: Cuts off the picture. Press again to restore the picture. AUDIO: Cuts off the sound from speakers and AUDIO jack. Press again or press the VOLUME + key to restore the sound. qk HELP key If you need help information during an operation, press this key to display help messages. ql COMMAND ON/OFF switch When this switch is set to OFF, no key...
Page 15
15 (GB) RS-232C INPLUG IN POWEROUTPUT INPUT A INPUT B VIDEO INCONTROL SREMOTE DIGITAL RGBUSB R/R-Y/PRB/B-Y/PBSYNC/HD VD G/YMOUSE AUDIO RGBMOUSE AUDIO AUDIO RGB MONITOR S VIDEO VIDEO AUDIOL R(MONO) DIGITAL RGB RGB 5BNC DIGITAL RGB RGB 5BNC ¥ insert the plugs of the cables properly; plugs that are not fully inserted often generate noise. When pulling out a cable, be sure to pull it out from the plug, not the cable itself. Notes ¥ Connect all the connecting cables to the INPUT A connector when you input a...
Page 16
16 (GB) When connecting with a Macintosh computer Right side SIC-S20 Mouse cable (not supplied) to mouse port to audio out to monitor out Connecting Signal adapter (not supplied) RS-232C INPLUG IN POWEROUTPUT INPUT A INPUT B VIDEO INCONTROL SREMOTE DIGITAL RGBUSB R/R-Y/PRB/B-Y/PBSYNC/HD VD G/YMOUSE AUDIO RGBMOUSE AUDIO AUDIO RGB MONITOR S VIDEO VIDEO AUDIOL R(MONO) DIGITAL RGB RGB 5BNC DIGITAL RGB RGB 5BNC Stereo audio connecting cable (not supplied) Computer Monitor Monitor cable SMF-410 (not...
Page 17
17 (GB) Connecting Using USB equipment (e.g., USB mouse) Connect the USB equipment to the USB connector on the connector panel. You can connect your computer to the projector via the RGB connector, 5BNC connector or DIGITAL RGB connector. (The example below uses the RGB connector.) Notes ¥ Your computer may not start correctly when it has been connected to the USB connector on the projector via the USB cable. In this case, first disconnect the USB cable, restart the computer, then connect the computer...
Page 18
18 (GB) RS-232C INPLUG IN POWEROUTPUT INPUT A INPUT B VIDEO INCONTROL SREMOTE DIGITAL RGBUSB R/R-Y/PRB/B-Y/PBSYNC/HD VD G/YMOUSE AUDIO RGBMOUSE AUDIO AUDIO RGB MONITOR S VIDEO VIDEO AUDIOL R(MONO) DIGITAL RGB RGB 5BNC DIGITAL RGB RGB 5BNC Notes ¥ Set the aspect ratio using ASPECT in the INPUT SETTING menu according to the input signal. ¥ To connect a 15k RGB/Component equipment, select the COMPUTER/COMPONENT/DTV YP BPR/DTV GBR in the INPUT-A in the SET SETTING menu according to the input signal. ¥ Use...
Page 19
19 (GB) INPUT-B:Selects audio and video signals input from the INPUT B connector. VIDEO:Selects audio and video signals input from the AUDIO/VIDEO (VIDEO IN) jacks. S-VIDEO:Selects audio and video signals input from the AUDIO/S VIDEO (VIDEO IN) jacks. Note The AUDIO (VIDEO IN) jacks are used as audio outputs of both VIDEO and S-VIDEO. 4Turn the zoom ring to adjust the size of the picture. 5Turn the focus ring to adjust the focus. Note Looking into the lens when projecting may cause injury to your eyes....
Page 20
20 (GB) Projecting ¥ ÒADJUSTINGÓ appears on the screen. Press the APA key again during the adjustment to restore the original screen. ¥ ÒComplete!Ó appears on the screen when the picture is adjusted properly. The picture may not be adjusted properly depending on the kinds of input signals. ¥ Adjust the items in the INPUT SETTING menu when you adjust the picture manually. For details, see page 24 (GB). To correct the trapezoid When the projecting image is a trapezoid, change the projectorÕs...