Sony Projector Vpl Hs10 User Manual

Step 1: Installing the Projector
Connections and 
Preparations
11 GB
Tip
The tables show the distances when projecting the 
conventional video and 1080i format signals. Distances 
used for projecting a 720p format signal, computer’s signal 
and data stored in the “Memory Stick” are shown on page 
57.
Note
When projecting with the optional Conversion Lens 
attached, the values a, b, e and f are slightly different from 
those in the table.
When projecting using “Side Shot” 
adjustment only
Position the...

Step 1: Installing the Projector
Connections and 
Preparations
GB 12
Installing the Projector and a 
Screen — Ceiling Installation
Use the PSS-610 Projector Suspension Support when 
you install the projector on a ceiling.
a: Distance between the center of the lens and the 
screen
b: Distance between the ceiling and the center of the 
lens
x: Distance between the ceiling and the center of the 
screen 
When using the 16:9 aspect ratio screen
Unit: mm (inches)
To calculate the installation measurements (SS:...

Step 2: Connecting the Projector
Connections and 
Preparations
13 GB
Installation diagram
Top view
Align the center of the lens with the center of the 
screen.
Front view
The lens is offset 7.9 mm (
5/16 inch) to the right from 
the center of the supporting pole. When mounting, 
take care to align the center of the lens with the center 
of the screen; not the center of the supporting pole.
Side view
Step 2: 
Connecting the 
Projector
When making connections, be sure to do the 
following:
 Turn off all...

Step 2: Connecting the Projector
Connections and 
Preparations
GB 14
Connecting with Video 
Equipment
Connecting a Digital Tuner 
Using the DVI Connector
Connecting a DVD Player Equipped 
With the Component Output
Connecting an AV Amplifier
S VIDEOVIDEODV I YPB/CBPR/CRPJ MULTIINPUT(FOR SERVICE USE)
Rear of the projector
S video or
video cable
(not supplied)
to component  
output with SONY logo 
upside
S 
Video Audio 
amplifier to S
video
or
video
output
R L
L
RY
PR/
CR 
Video equipment
Signal interface...

Step 2: Connecting the Projector
Connections and 
Preparations
15 GB
Connecting a Computer
When connecting to an analog connector
To hear the sound from a computer, use the speakers 
built in the computer or connect the active speakers to 
the computer.
Note
Even if you connect the signal interface cable to the audio output 
on the computer, there is no sound output from the projector.
When connecting to the DVI connector
Connecting Using the 
Optional Interface Unit
Using the optional interface unit...

Step 3: Adjusting the Picture Size and Position
Connections and 
Preparations
GB 16
Step 3: Adjusting 
the Picture Size 
and Position
Tip
The ? /
1 (on/standby), INPUT, MENU, and m/M/

Step 3: Adjusting the Picture Size and Position
Connections and 
Preparations
17 GB
6Adjust the size and position of 
the picture to fit the screen.
When projecting using both “Side Shot” and 
“V Keystone” adjustments
1Use the adjuster to adjust the vertical 
position.
If you set “V Keystone” in the INSTALL 
SETTING menu to “Auto” (1 page 29), the 
vertical distortion will be automatically corrected.
For how to use the adjuster, see “Using the 
adjuster” on page 18.
Note
The “V Keystone” adjustment may...

Step 4: Selecting the Menu Language
Connections and 
Preparations
GB 18
When projecting from the center
Adjust so that both the position and size of 
the bottom side of the picture fit those of the 
bottom side of the screen using the adjuster 
and the ZOOM+/– button.
If you set “V Keystone” in the INSTALL SETTING 
menu to “Auto” (1 page 29), the vertical distortion 
will be automatically corrected.
For how to use the adjuster, see “Using the adjuster.”
Note
The V Keystone adjustment may not correct...

Step 4: Selecting the Menu Language
Connections and 
Preparations
19 GB
1Plug the AC power cord into a 
wall outlet.
The ON/STANDBY indicator lights in red and 
the projector goes into standby mode.
2Press the [/1 (on/standby) 
switch to turn on the projector.
The ON/STANDBY indicator lights in green.
3Press MENU.
The menu appears.
The menu presently selected is shown as a 
yellow button.
4Press M or m to select the 
MENU SETTING   menu, and 
press , or ENTER.
The selected menu appears.
5Press M or m to...

Projecting the Picture on the ScreenGB 20
ProjectingProjecting the 
Picture on the 
Screen
This section describes how to operate the 
projector to view the picture from the 
equipment connected to the projector. It 
also describes how to select the wide 
screen mode or the quality of the picture to 
suit your taste. 
+
–
+
–
INPUT LIGHT
STANDARDCINEMADYNAMIC
USER 2 PICTURE MODE
USER 3 USER 1
MS SLIDEMENU APA
LENS
VOLUME SIDE SHOT
RESETWIDE MODE
ENTER
24