Sony Projector Vpl Hs10 User Manual

Operating Instructions __________________________________GB
Mode d’emploi ________________________________________FR
Manual de instrucciones _________________________________ES
4-091-754-12(2)
Video Projector
© 2002 Sony Corporation
VPL-HS10
Video Projector          VPL-HS10 

GB 2
To prevent fire or shock hazard, do not expose 
the unit to rain or moisture.
To avoid electrical shock, do not open the 
cabinet.  Refer servicing to qualified personnel 
only. 
For the customers in the USA
If you have any questions about this product, you may 
contact:
Sony Electronics Inc.
Attn: Business Information Center (BIC)
12451 Gateway Boulevard
Ft. Myers, Florida 33913
Telephone No.: 800-686-7669
The number below is for FCC related matters only.
Declaration of Conformity
Trade Name: SONY...

3 GB
Table of Contents
Precautions ............................................. 5
Connections and Preparations
Unpacking ............................................... 6
Step 1: Installing the Projector  .............. 7
Before Setting Up the Projector  .........................7
Using the Optional Conversion Lens  .................9
Installing the Projector and a Screen 
— Floor Installation  .........................................10
Installing the Projector and a Screen 
— Ceiling Installation...

GB 4
 Others
Troubleshooting ...................................... 51
Replacing the Lamp ................................. 53
Replacing the Air Filter  ........................... 54
Specifications .......................................... 55
Location of Controls ................................ 63
Front ................................................................. 63
Rear .................................................................. 64
Remote Control...

Precautions5 GB
Precautions
On safety
 Check that the operating voltage of your unit is 
identical with the voltage of your local power 
supply.
 Should any liquid or solid object fall into the 
cabinet, unplug the unit and have it checked by 
qualified personnel before operating it further. 
 Unplug the unit from the wall outlet if it is not to be 
used for several days. 
 To disconnect the cord, pull it out by the plug. Never 
pull the cord itself. 
 The wall outlet should be near the unit and...

GB 6Unpacking
Connections 
and 
PreparationsUnpacking
Check the carton to make sure it contains the 
following items:
Remote control (1), 
Size AA (R6) 
batteries (2)
Signal interface 
cable (1)
Air filter (for 
replacement) (1)
Cinema filter (1)
AC power cord (1)
Operating Instructions (1)
Inserting the batteries into the remote 
control This section describes how to install the 
projector and screen, how to connect the 
equipment from which you want to project 
the picture, etc.
Insert the batteries E...

Step 1: Installing the Projector
Connections and 
Preparations
7 GB
Step 1: Installing 
the Projector
You can obtain good picture quality even when you 
project the picture from the side of the screen (“Side 
Shot”) (1 page 10). You can enjoy home 
entertainment with this projector in various situations.
Enjoying home theater
Enjoying video games on a large screenWatching sports, etc. with your company
Viewing images, recorded by a digital 
camera and stored in the “Memory Stick,” on 
a large screen...

Step 1: Installing the Projector
Connections and 
Preparations
GB 8
Highly heated and humid
Very dusty and extremely smoky
Do not use the projector under the following 
conditions:
Tilting the unit extremely
Blocking the ventilation holes
Note
Installing the unit at altitudes
When using the projector at an altitude of 1,500 m or 
higher, turn on high altitude mode in the INSTALL 
SETTING menu. Failing to set this mode when using 
the projector at high altitudes could have adverse 
effects, such as...

Step 1: Installing the Projector
Connections and 
Preparations
9 GB
Using the Optional 
Conversion Lens
You can install the following two types of lenses 
(optional) on the projector. For projection distances 
when installing the Conversion Lens, see page 58.
 VPLL-CT10 Long Focused Conversion Lens
 VPLL-CW10 Short Focused Conversion Lens
Follow the steps below to install the Conversion Lens.
For details on installing the Lens, refer also to the 
installation manual supplied with the Lens.
1 Turn off...

Step 1: Installing the Projector
Connections and 
Preparations
GB 10
To remove the installed Conversion Lens
1 Remove the end of the safety wire of the 
installed Lens from the bottom of the 
projector by removing the screw.
2 Turn the installed Lens counterclockwise 
until it can be removed.
Notes
 Be sure not to drop the uninstalled Conversion Lens.
 When you adjust picture distortion using “V Keystone” or 
“Side Shot” in the INSTALL SETTING menu with the 
optional Conversion Lens attached to the...