Sony Projector Vpl Hs1 User Manual

Operating Instructions ___________________________________GB
Mode d’emploi _________________________________________FR
Manual de instrucciones __________________________________ES
4-085-330-
11 (1)
LCD Video Projector
© 2001 Sony Corporation
VPL-HS1
LCD Video Projector          VPL-HS1 

VPL-HS1
GB 2
To prevent fire or shock hazard, do not expose 
the unit to rain or moisture.
To avoid electrical shock, do not open the 
cabinet.  Refer servicing to qualified personnel 
only. 
For the customers in the USA
If you have any questions about this product, you may 
contact:
Sony Electronics Inc.
Attn: Business Information Center (BIC)
12451 Gateway Boulevard
Ft. Myers, Florida 33913
Telephone No.: 800-686-7669
The number below is for FCC related matters only.
Declaration of Conformity
Trade...

3GB
Table of Contents
Precautions ............................................... 4
Connections and Preparations
Unpacking ................................................. 5
Step 1: Installing the Projector  .................. 5
Before Setting Up the Projector  ..................... 6
Installing the Projector and a Screen .............. 7
Step 2: Connecting the Projector  .............. 8
Connecting with video equipment  ................. 8
Connecting Using the Optional Signal Interface 
Cables...

GB 4Precautions
Precautions
On safety
Check that the operating voltage of your unit is 
identical with the voltage of your local power 
supply.
Should any liquid or solid object fall into the 
cabinet, unplug the unit and have it checked by 
qualified personnel before operating it further. 
Unplug the unit from the wall outlet if it is not to be 
used for several days. 
To disconnect the cord, pull it out by the plug. Never 
pull the cord itself. 
The wall outlet should be near the unit and easily...

5 GB Unpacking / Step 1: Installing the Projector
Connections and 
Preparations
Connections and Preparations
This section describes how to install the projector and 
screen, how to connect the equipment from which  
you want to project the picture, etc.
Unpacking
Check the carton to make sure it contains the 
following items:
Remote control (1), 
Size AA (R6) 
batteries (2)
Signal interface 
cable (1)
Air filter (for 
replacement) (1)
Lens cap (1)
AC power cord (1)
Operating Instructions (1)
Inserting...

GB 6Step 1: Installing the Projector
Connections and 
Preparations
Watching sports, etc. with your company
Viewing images, recorded by a digital 
camera and stored in the “Memory Stick,” on 
a large screen.
Before Setting Up the 
Projector
Do not place the projector in the following situations, 
which may cause malfunction or damage to the 
projector.
Poorly ventilatedHighly heated and humid
Very dusty and extremely smoky
Do not use the projector under the following 
conditions.
Tilting the unit out of...

7 GB Step 1: Installing the Projector
Connections and 
Preparations
Installing the Projector and a 
Screen
The installation distance between the projector and 
screen varies depending on the size of the screen.
1Determine the installation 
position of the projector and 
screen.
When projecting from the side (SIDE 
SHOT)
Position the projector with the lens end come 
within the area   in the illustration, by using 
the values a, b, c and d in the table below as a 
guide. Align the bottom of the adjuster...

GB 8Step 2: Connecting the Projector
Connections and 
Preparations
Step 2: 
Connecting the 
Projector
When making connections, be sure to do the 
following:
Turn off all equipment before making any 
connections.
Use the proper cables for each connection.
Insert the cable plugs properly; plugs that are not 
fully inserted often generate noise. When pulling 
out a cable, be sure to pull it out from the plug, not 
the cable itself.
When you connect your projector to PJ MULTI 
INPUT, select the input...

9 GB Step 3: Adjusting the Picture Size and Position
Connections and 
Preparations
To connect with a computer
Connecting Using the Optional 
Interface Unit
Using the optional interface unit allows you to 
connect various video equipment, and to select the 
output to the projector or TV from the connected 
equipment simply by switching the select switch on 
the interface unit.
Step 3: Adjusting 
the Picture Size 
and Position
Signal interface cable
SIC-HS30 (not supplied)
to monitor output
to audio output...

GB 10Step 3: Adjusting the Picture Size and Position
Connections and 
Preparations
1Plug the AC power cord into a 
wall outlet.
The ON/STANDBY indicator lights in red and 
the projector goes into standby mode.
2Press the [/1 (on/standby) 
switch to turn on the projector.
The ON/STANDBY indicator lights in green.
3Turn on the equipment 
connected to the projector.
Refer to the operating instructions of the 
connected equipment.
4Press INPUT to project the 
picture on the screen. 
Each time you press the...