Sony Projector VPL-GT100 User Manual

41 
Adjustments and Settings Using a Menu
Portrait ModeYou can set this mode according to the type of installation.
On: Use this setting for a wall installation (1 page 8).
Off: Use this setting when using the unit horizontally, or ceiling 
mounted.
If you use the unit with improper settings, an internal malfunction 
may occur.
Standby ModeYou can select the power consumption in standby.
Standard: The power consumption in standby mode is normalized.
Low: The power consumption in standby mode is lowered....

 42
Function Menu
The Function menu is used for changing the settings of the various functions of the unit. 
3D SettingsYou can change the settings of the 3D function.
2D-3D Display Sel.: For Switching the video images to “2D” or 
“3D.”
Auto: Displays 3D video images when HDMI signals with 3D 
information are input. Displays 2D video images when other 
signals are input.
3D: Displays 3D video images according to the 3D system 
selected in “3D Format.” However, when HDMI signals with 3D 
information are...

43 
Adjustments and Settings Using a Menu
3D Settings3D Brightness: For adjusting the brightness of the picture when 
watching 3D video images. You can select the brightness “High” 
or “Standard.”
3D Depth Adjust: For adjusting the depth of the 3D video images 
on the screen. The setting can be made only when a 3D Format 
other than “Simulated 3D” is selected.
We recommend that “3D Depth Adjust” be set to “0.” The 3D 
video images may be difficult to perceive, depending on the 
setting of “3D Depth...

 44
HDMI SettingDevice List: Lists all the Control for HDMI compatible equipment 
connected to the unit.
When “Enable” is selected, the Control for HDMI setting of Sony 
equipment (AV amplifier, video, etc.), which is compatible with 
“Control for HDMI - Easy Setting,”* will also be effective.
* “Control for HDMI - Easy Setting” is a function that makes the 
Control for HDMI setting of equipment connected to HDMI input 
of the unit effective as well when the Control for HDMI setting of 
the unit is...

45 
Adjustments and Settings Using a Menu
Installation Menu
The Installation menu is used for changing the installation settings.
Image FlipFlips the picture on the screen horizontally and/or vertically. 
HV: Flips the picture horizontally and vertically.
H: Flips the picture horizontally. 
V: Flips the picture vertically.
Off: The picture does not flip.
Use this item for installation for the backside projection or ceiling 
installation.
Lens ControlAvoids any operation of the lens such as “Lens Focus,”...

 46
BlankingThis feature allows you to adjust the displayable region within 
the four directions of the screen.
Select the edge to adjust by highlighting Left, Right, Top, or Bottom 
using the M/m buttons.
Adjust the amount of blanking using the 

47 
Adjustments and Settings Using a Menu
Panel AlignmentThis feature allows you to adjust the gaps in the color of 
characters or the picture.
When set to “On,” “Adjust Color” and “Pattern Color” can be 
assigned and adjusted. 
Adjust Item: Selects how to make adjustments from below.
Shift: Shifts the whole picture and makes adjustments.
Zone: Selects the desired range and makes adjustments.
Adjust Color: Assigns the desired color to adjust the gaps in color. 
Select “R” (Red) or “B” (Blue) to make...

 48
Network SettingPerform internet protocol settings.
Set this when accessing from a computer (1 page 50) or using the 
supplied gamma control adjustment software “ImageDirector3.”
IP Address Setup: Select the IP address setting method.
Auto (DHC P): The IP address is assigned automatically from the 
DHCP server such as a router.
Manual: Specify the IP address manually.
When “Manual” is selected for “IP Address Setup,” select the item 
with the 

49 
Adjustments and Settings Using a Menu
Information Menu
The Information menu displays the model name, serial number, and the cumulated hours 
of usage of the lamp.
You cannot adjust or change the displays listed above.
This unit has 25 types of preset data for input signals (the preset memory). When the preset 
signal is input, the unit automatically detects the signal type and recalls the data for the 
signal from the preset memory to adjust it to an optimum picture. The memory number 
and signal...

 50
Using Network Features
Connection to the network allows you to operate the following features:
 Checking the current status of the unit via a Web browser.
 Remotely controlling the unit via a Web browser.
 Receiving the e-mail report for the unit.
 Making the network settings for the unit.
 Supports network monitoring and control protocol (Advertisement, PJ Talk, SNMP, 
AMX DDDP [Dynamic Device Discovery Protocol]).
 Using the gamma control software “ImageDirector3.”
 The menu displays used for the...