Sony Projector VPL-GT100 User Manual

31 
Adjustments and Settings Using a Menu
 
This section describes how to make various adjustments and settings using the menus.
Operation through 
the Menus
The unit is equipped with an on-screen menu 
for making various adjustments and settings. 
If you select an item name followed by an 
arrow (B), the next menu window with 
setting items appears.
1Press MENU.
The menu window appears.
2Press M/m to select a menu item, 
and press , or  .
The items that can be set or adjusted 
with the selected menu...

 32
4Make the setting or adjustment 
of an item.
When changing the adjustment 
level
To increase the value, press M/,.
To decrease the value, press m/

33 
Adjustments and Settings Using a Menu
Picture Menu
The Picture menu is used for adjusting the picture.
These items may not be available, depending on the type of input signal. For details, see “Input 
Signals and Adjustable/Setting Items” (1 pages 70 to 73 ).
Item names in brackets represent those printed on the remote control.
Note
Calib. Preset
[CALIBRATED PRESET]You can select the picture viewing mode that best suits the type of 
video source or the environment.
You can save and use different...

 34
Reality Creation
[REALITY CREATION]Adjusts the detail and noise processing of images. (Super-resolution 
function)
On: Applies detail and noise processing effects.
Resolution: When you increase the setting value, the texture and 
detail of the picture become sharper.
Noise Filtering: When you increase the setting value, the noise 
(picture roughness) becomes less prominent.
Test: On/Off: Changes “On” and “Off” at a certain frequency to 
check the effect of “Reality Creation.”
Tip
The display position...

35 
Adjustments and Settings Using a Menu
Motionflow Motion Enhancer [MOTION ENHANCER]
Reproduces fast-moving pictures smoothly without generating 
afterimages.
High: Select this for picture quality smoother than “Low.”
Low: Select this for smooth picture quality.
Off: Select this to not apply the motion enhancer function.
Tip
Certain scenes may contain digital signal artifacts. In this case, set this 
function to “Off.”
Contrast
[CONTRAST]Adjusts the contrast.
Higher values increase the sharpness in...

 36
Expert Setting NR (Noise Reduction)
Reduces the roughness or noise of the picture.
Usually, use to select “Off.”
If the picture is rough or noisy, select a setting from among “Low,” 
“Middle” or “High” according to the input signal source.
MPEG NR (MPEG Noise Reduction)
Reduces block noise and mosquito noise, in particular in digital 
signals.
Usually, use to select “Off.”
If the picture is rough or noisy, select a setting from among “Low,” 
“Middle” or “High” according to the input signal source....

37 
Adjustments and Settings Using a Menu
Expert Setting Gamma Correction [GAMMA CORRECTION]
Adjusts the response characteristics of the tone of the picture.
Select a favorite tone from 10 options.
1.8:            Bright  Produces a brighter picture overall.
2.0
2.1
2.2
2.4
2.6:            Dark   Produces a darker picture overall.
Gamma 7: Brightens dark areas in the picture, and expands gradation 
expression.
Gamma 8: Produces a picture with contrast emphasized slightly.
Gamma 9: Produces a picture with...

 38
Screen Menu
You can set the input signal, picture size, aspect mode, etc..
These items may not be available, depending on the type of input signal. For details, see “Input 
Signals and Adjustable/Setting Items” (1 pages 70 to 73).
Item names in brackets represent those printed on the remote control.
Note
Picture Position
[POSITION]You can store up to five combinations of lens settings (focus, window 
size, window position) and aspect ratio.
After setting the lens and aspect, select from “1.85:1,”...

39 
Adjustments and Settings Using a Menu
Aspect
[ASPECT]You can set the aspect ratio of the picture to be displayed for the 
current input signal (1 page 26). This item is enabled only when a 
video signal (preset memory numbers 5 to 8, 10 to 14, 18 to 20, 74 
and 93 to 95) 
(1 page 68) is input.
1.85:1 Zoom: A 1.85:1 aspect ratio picture is displayed in its original 
aspect ratio, enlarged so that black bands do not appear at the top and 
bottom of the screen.
2.35:1 Zoom: A 2.35:1 aspect ratio picture...

 40
Setup Menu
The Setup menu is used to change the factory preset settings, etc.
StatusSets whether or not on-screen messages or menus, etc. are 
displayed.
On: Displays on-screen messages and menus.
Off: Turns off the on-screen displays, other than certain menus, a 
message when turning off the power, and warning messages.
All Off: Turns off the on-screen displays, other than certain menus, 
and a message when turning off the power.
When “All Off” is selected, warning messages for high temperature 
or...