Sony Projector Vpl Fx52 User Manual

21 Selecting the Menu Language
Setting Up and Projecting
Selecting the Menu Language
You can select one of nine languages for displaying the menu and other on-
screen displays. The factory setting is English.
1Plug the AC power cord into a wall outlet.
2Press the I / 1 key to turn on the projector.
3Press the MENU key.
The menu appears.
The menu presently selected is shown as a yellow button.
MUTINGPICAUDIO
LENS
APA
AIR SHOT
INPUTTILT/KEYSTONE
PJ NETWORKON COMMAND
OFF
VOLUME
MENU/
TABFREEZE
2
3
4,5,6...

 22Selecting the Menu Language
4Press the M or m key to select the MENU SETTING menu, then press the 
, or ENTER key.
The selected menu appears.
5Press the M or m key to select “Language,” then press the , or ENTER 
key.
6Press the M or m key to select a language, then press the < or ENTER 
key.
The menu changes to the selected language.
To clear the menu
Press the MENU key.
The menu disappears automatically if a key is not pressed for one minute.
PICTURE SETTING
Picture Mode:
Adjust Picture...Input A...

23 Projecting
Setting Up and Projecting
Projecting
1Plug the AC power cord into a wall outlet, then connect all equipment.
The ON/STANDBY indicator lights in red and the projector goes into 
standby mode. 
2Press the I / 1 key.
The ON/STANDBY indicator lights in green 
after it flashes for about 
several seconds
.
3Turn on the equipment connected to the projector.
MUTINGPICAUDIO
LENS
APA
AIR SHOT
INPUTTILT/KEYSTONE
PJ NETWORKON COMMAND
OFF
VOLUME
MENU/
TABFREEZE
2
4
6~9
6~9
RESET LENS CONTROL
POWER...

 24Projecting
4Press the INPUT key to select the input source. 
Smart APA (Auto Pixel Alignment) adjusts the picture of the connected 
equipment so that it is projected clearly.
 If “Auto Input Search” is set to “On”, the projector searches for the signals from 
the connected equipment and displays the input channel where the input signals 
are found.
For details, see “Auto Input Search” in the SET SETTING menu on page 34.
 The smart APA is effective for the analog  input signal from a computer only....

25 Projecting
Setting Up and Projecting
7Press the LENS key on the Remote Commander or LENS CONTROL key 
on the control panel repeatedly to display “LENS ZOOM.”  Then press the 
arrow keys to adjust.
8Press the LENS key on the Remote Commander or LENS CONTROL key 
on the control panel repeatedly to display “LENS FOCUS.”  Then press the 
arrow keys to adjust again.
9Press the LENS key on the Remote Commander or LENS CONTROL key 
on the control panel repeatedly to display “LENS SHIFT.”  Then press the...

 26Projecting
You will not be able to use the projector if you forget your password and the password 
administrator is not available. Be please aware that using the security lock can prevent 
valid usage in such cases.
1Press the MENU key and then, in the INSTALL SETTING menu, turn on 
the security lock setting.
2Enter the password.
Use the MENU, 
M/m/

27 Projecting
Setting Up and Projecting
2Enter the password.
Enter the password that was set. 
If you call the customer service center because you have forgotten the password, you 
will need to be able to verify the projector’s serial number and your identity.  (This 
process may differ in other countries.)  Once your identity has been confirmed, we will 
provide you with the password.
To turn off the power
1Press the I / 1 key.
“POWER OFF?  Please press I / 1 key again.” appears to confirm that you...

 28Projecting
To enlarge the image (Digital Zoom function)
You can select a point in the image to enlarge. This function works when a 
signal from a computer is input.
1Press the D ZOOM + key on the Remote Commander.
The digital zoom icon appears the center of the image.
2Move the icon to the point on the image you want to enlarge. Use the arrow 
key (M/m/

29 Using the MENU
Adjustments and Settings Using the Menu
BAdjustments and Settings Using the Menu
Using the MENU
The projector is equipped with an on-screen 
menu for making various adjustments and 
settings. The setting items are displayed in a 
pop-up menu or in a sub menu.  If you select 
an item name followed by dots (...), a sub 
menu with setting items appear. You can 
change the tone of the menu display and the 
menu language displayed in the on-screen 
menu.
To change the menu language, see...

 30The PICTURE SETTING Menu
4Make the setting or adjustment on an 
item.
 When changing the adjustment level:
To increase the number, press the M or , key.
To decrease the number, press the m 
or < key.
Press the ENTER key to restore the 
previous screen.
 When changing the setting:
Press the M or m key to change the 
setting.
Press the ENTER or < key to restore 
the previous screen.
To clear the menu
Press the MENU key. 
The menu disappears automatically if a key 
is not pressed for one minute.
To reset...