Sony Projector VPL-FHZ700L User Manual

							51Specifications
Others
HDMI terminal (HDMI, female)
Acceptable Input Signals
Computer signal
1 T.M.D.S.
Data2+11 T.M.D.S.
Clock Shield
2 T.M.D.S.
Data2 Shield12 T.M.D.S.
Clock–
3 T.M.D.S.
Data2–13 NC
4 T.M.D.S.
Data1+14 RESERVED 
(N.C.)
5 T.M.D.S.
Data1 Shield15 SCL
6 T.M.D.S.
Data1–16 SDA
7 T.M.D.S.
Data0+17 GND
8 T.M.D.S.
Data0 Shield18 +5V Power
9 T.M.D.S.
Data0–19 Hot Plug 
Detect
10 T.M.D.S.
Clock+
ResolutionfH [kHz]/
fV [Hz]
Input terminal
INPUT A/ 
INPUT BINPUT C/ 
INPUT D/ 
INPUT E
640 × 350   31.5/70 
z–
37.9/85 
z–
640 × 400 31.5/70 
z–
37.9/85 
z–
640 × 480 31.5/60 
zz
35.0/67 z–
37.9/73 
z–
37.5/75 
z–
43.3/85 
z–
800 × 600 35.2/56 z–
37.9/60 
zz
48.1/72 z–
46.9/75 
z–
53.7/85 
z–
832 × 624 49.7/75 
z–
1024 × 768 48.4/60 
zz
56.5/70 z–
60.0/75 
z–
68.7/85 
z–
1152 × 864 64.0/70 
z–
67.5/75 
z–
77.5/85 
z–
1152 × 900 61.8/66 
z–
1280 × 960 60.0/60 
zz
75.0/75 z–
1280 × 1024 64.0/60 
zz
80.0/75 z–
91.1/85 
z–
1400 × 1050 65.3/60 
zz
1600 × 1200 75.0/60 zz
1280 × 768 47.8/60 zz
1280 × 720 45.0/60 zz*2
1920 × 1080 67.5/60  –z*2
1366 × 768 47.7/60 zz
1440 × 900 55.9/60 zz
1680 × 1050 65.3/60 zz
1280 × 800 49.7/60 zz
1920 × 1200 74.0/60 z*1z*1
1600 × 900 60.0/60 z*1z*1
ResolutionfH [kHz]/
fV [Hz]
Input terminal
INPUT A/ 
INPUT BINPUT C/ 
INPUT D/ 
INPUT E 
						

							52Specifications
Video signal
*1: Available for VESA Reduced Blanking 
signals only.
*2: INPUT C/INPUT E (when the BKM-PJ10 
is installed) is determined as a computer 
signal; INPUT D/INPUT E (when the 
BKM-PJ20 is installed) is determined as a 
video signal.
*3: Available for the BKM-PJ20 only.
*4: Not available for the BKM-PJ20.
 When a signal other than the signals listed in 
table is input, the picture may not be 
displayed properly.
 An input signal meant for screen resolution 
different from that of the panel will not be 
displayed in its original resolution. Text and 
lines may be uneven.
 Some actual value may differ slightly from 
the design values given in the table.
Combinations of Input Signals
SignalfV [Hz]
Input terminal
VIDEO/
S VIDEOINPUT AINPUT C/ 
INPUT D/ 
INPUT E
NTSC 60
z––
PA L /
SECAM50
z––
480i 60 –
zz
576i 50 –zz
480p 60 –zz*4
576p 50 –zz*4
1080i 60 –zz
1080i 50 –zz
720p 60 –zz*2
720p 50 –zz
1080p 60 – –z*2
1080p 50 – –z
1080p 24 – –z
1080p 30 – –z*3
Notes
Main pictureSub picture
INPUT A
(RGB/YP
BPR)INPUT B (RGB)
INPUT B (RGB) –
INPUT C (DVI-D)
INPUT B (RGB) INPUT D (HDMI)
INPUT E (Optional 
adaptor)
S VIDEO
VIDEO 
						

							53Projection Distance and Lens Shift Range
Others
Projection Distance and Lens Shift Range
The projection distance refers to the distance between the front of the lens and the projected 
surface.
The lens shift range represents the distance in percent (%) by which the lens can be shifted from 
the center of the projected image. The lens shift range is regarded as 0% when the point (A) in 
the illustration (point where a line drawn from the center of the lens and the projected image 
cross at right angles) is aligned with the center of the projected image and full width or full 
height of the projected image is regarded as 100%.  
VS 
+:  Vertical lens shift range (up) [%]
VS –:  Vertical lens shift range (down) [%]
HS +:  Horizontal lens shift range (right) [%]
HS 
–:  Horizontal lens shift range (left) [%]
Projected image Projection distance L
Front of the lens
Projected image
Center of the lensVS 
+Center of the 
projected 
image
50%
50%HS 
–HS +
VS –Projected imageCenter of the lens
Shaded region: Lens shift range Lens shift range
Side of the projector A
Projected image
Center of the lens Center of the 
projected 
image
50%
50%Lens shift range
Top of the projector A 
						

							54Projection Distance and Lens Shift Range
Projection distance
Unit: m (inches)
Projection distance formula
D: Projected image size (Diagonal) Unit: m (inches)
Projection image sizeProjection distance L
DiagonalWidth × HeightVPLL-FM22VPLL-ZM42VPLL-ZM102
80 (2.03 m) 1.72 × 1.08
(68 × 42)
1.48
(58)3.17 – 3.98
(125 – 157)5.62 – 8.33
(221 – 328)
100 (2.54 m) 2.15 × 1.35
(85 × 53)
1.87
(74)3.98 – 4.99
(157 – 196)7.07 – 10.46
(278 – 412)
120 (3.05 m) 2.58 × 1.62
(102 × 64)
2.25
(89)4.78 – 6.00
(188 – 236)8.52 – 12.58
(335 – 495)
150 (3.81 m) 3.23 × 2.02
(127 × 79)
2.83
(111)5.99 – 7.51
(236 – 296)10.69 – 15.77
(421 – 621)
200 (5.08 m) 4.31 × 2.69
(170 × 106)
3.79
(149)8.01 – 10.03
(315 – 395)14.31 – 21.09
(563 – 830)
Projection image sizeProjection distance L
DiagonalVPLL-Z4007VPLL-4008VPLL-Z4011VPLL-Z4015
80 (2.03 m) 1.13 – 1.35
(45 – 53)1.80
(71)2.36 – 3.56
(93 – 140)
3.36 – 4.42
(132 – 174)
100 (2.54 m) 1.43 – 1.72
(57 – 67)2.27
(89)2.96 – 4.47
(117 – 176)
4.22 – 5.55
(166 – 219)
120 (3.05 m) 1.73 – 2.09
(68 – 82)2.74
(108)3.57 – 5.38
(141 – 211)
5.09 – 6.68
(200 – 263)
150 (3.81 m) 2.17 – 2.65
(86 – 104)3.44
(135)4.48 – 6.74
(177 – 265)
6.38 – 8.38
(251 – 330)
200 (5.08 m) 2.91 – 3.57
(115 – 140)4.61
(182)6.00 – 9.01
(236 – 354)
8.55 – 11.20
(337 – 441)
Projection image sizeProjection distance L
DiagonalVPLL-Z4019VPLL-Z4025VPLL-Z4045
80 (2.03 m)
4.36 – 5.57
(172 – 219)5.48 – 10.14
(216 – 399)10.09 – 17.46
(397 – 687)
100 (2.54 m)
5.48 – 6.99
(216 – 275)6.88 – 12.71
(271 – 500)12.66 – 21.88
(498 – 861)
120 (3.05 m)
6.60 – 8.41
(260 – 331)8.29 – 15.28
(326 – 602)15.23 – 26.30
(600 – 1035)
150 (3.81 m)
8.29 – 10.55
(326 – 415)10.40 – 19.14
(409 – 754)19.10 – 32.93
(752 – 1296)
200 (5.08 m)
11.09 – 14.10
(437 – 555)13.92 – 25.57
(548 – 1007)25.53 – 43.99
(1005 – 1732)
LensProjection distance L (minimal length)Projection distance L (maximal length)
VPLL-FM22 L = 0.0192 × D – 0.0524
(L = 0.7556 × D – 2.0633)– 
						

							55Projection Distance and Lens Shift Range
Others
Lens shift range
x VPLL-ZM42, VPLL-ZM102
x VPLL-Z4019, VPLL-Z4025, VPLL-Z4045
VPLL-ZM42L = 0.0403 × D – 0.0558
(L = 1.5861 × D – 2.1962)L = 0.0504 × D – 0.0524
(L = 1.9861 × D – 2.0625)
VPLL-ZM102
L = 0.0724 × D – 0.1755
(L = 2.8508 × D – 6.9075)L = 0.1063 × D – 0.1635
(L = 4.1842 × D – 6.4371)
VPLL-Z4007
L = 0.0148 × D – 0.0584
(L = 0.5841 × D – 2.3005)L = 0.0186 × D – 0.1354
(L = 0.7312 × D – 5.3296)
VPLL-4008 L = 0.0234 × D – 0.0777
(L = 0.9229 × D – 3.0591)–
VPLL-Z4011 L = 0.0303 × D – 0.0739
(L = 1.1940 × D – 2.9096)L = 0.0454 × D – 0.0651
(L = 1.7871 × D – 2.5635)
VPLL-Z4015
L = 0.0433 × D – 0.1100
(L = 1.7030 × D – 4.3315)L = 0.0565 × D – 0.1029
(L = 2.2269 × D – 4.0525)
VPLL-Z4019
L = 0.0561 × D – 0.1260
(L = 2.2066 × D – 4.9594)L = 0.0711 × D – 0.1200
(L = 2.8008 × D – 4.7225)
VPLL-Z4025
L = 0.0704 × D – 0.1611
(L = 2.7714 × D – 6.3404)L = 0.1286 × D – 0.1510
(L = 5.0650 × D – 5.9456)
VPLL-Z4045
L = 0.1287 × D – 0.2160
(L = 5.0674 × D – 8.5019)L = 0.2211 × D – 0.2269
(L = 8.7050 × D – 8.9328)
LensProjection distance L (minimal length)Projection distance L (maximal length)
59%
31% 31%
59%VS + = VS – = 59 – 1.903 × (HS + or HS –) [%]
HS + = HS – = 31 – 0.525 × (VS + or VS –) [%]
113%
63% 63%
113%VS + = VS – = 113 – 1.794 × (HS + or HS –) [%]
HS + = HS – = 63 – 0.558 × (VS + or VS –) [%] 
						

							56Projection Distance and Lens Shift Range
x VPLL-Z4007
x VPLL-4008
x VPLL-Z4011
x VPLL-Z4015
15%
6% 6%
15%VS + = VS – = 15 – 2.500 × (HS + or HS –) [%]
HS + = HS – = 6 – 0.400 × (VS + or VS –) [%]
41%
19% 19%
41%VS + = VS – = 41 – 2.158 × (HS + or HS –) [%]
HS + = HS – = 19 – 0.463 × (VS + or VS –) [%]
110%
57% 57%
110%VS + = VS – = 110 – 1.930 × (HS + or HS –) [%]
HS + = HS – = 57 – 0.518 × (VS + or VS –) [%]
109%
57% 57%
109%VS + = VS – = 109 – 1.912 × (HS + or HS –) [%]
HS + = HS – = 57 – 0.523 × (VS + or VS –) [%] 
						

							57Dimensions
Others
Dimensions
FrontUnit: mm (inches)
BottomUnit: mm (inches)
S VIDEO  IN VIDEO  IN
RS-232C
CONTROL S
INPUT EINPUT B
R/PRG/Y HD VD
OUTPUTMONITORB/PBINPUT C INPUT D      HDMIRGBDVI-D
INPUT A
IN OUT
PLUG IN POWER
265 (10 7/16) 530 (20 
7/8)
105 (4 
1/8) 204 (8 
1/32)
Center of the lens
213 (8 
3/8)
62.5 
(2 15/32)
216 (8 
1/2)
474 (18 21/32)
137.2 
(5 
13/32)
14  ( 
9/16 )475.2 (18 23/32) 545 (21 
15/32)
131 (5 
5/32)
Center 
of the 
lensø24
131 (5 
5/32) 215 (8 
15/32)
141 (5 9/16)215 (8 
15/32)
141 (5 
9/16)
216 (8 
1/2) 
						

							58Dimensions
When using the PSS-630 projector suspension support 
Unit: mm (inches)
Center of 
the lens
150 (5 
29/32)
530 (20 
7/8)
234 (9 7/32)
265 (10 
7/16)60 (2 
3/8)
311 (12 1/4)150 (5 
29/32) Front of the cabinet
60 (2 
3/8)
350 (13 7/8)
380 (15)
410 (16 
1/4)
440 (17 3/8)
470 (18 5/8)
500 (19 3/4) 455 (18)
485 (19 
1/8)
515 (20 3/8)
545 (21 1/2)
575 (22 3/4)
605 (23 7/8)
Center of 
the lens 
						

							59Dimensions
Others
Location information of the labels
Light source specifications
4.0 W laser diodes × 48
Wavelength: 440 - 450 nm
Beam divergence angle from lens of 
this unit
Warning label
Explanatory label
Laser emission port
LensZoom 
maximum: αZoom 
minimum: α
VPLL-FM22 68° –
VPLL-ZM42 36° 29°
VPLL-ZM102 20° 14°
VPLL-Z4007 82° 73°
VPLL-4008 57° –
VPLL-Z4011 46° 31°
VPLL-Z4015 33° 25°
VPLL-Z4019 25° 20°
VPLL-Z4025 20° 11°
VPLL-Z4045 11° 6° 
						

							60Dimensions
The distance L’ between the front of 
the lens (center) and the front of the 
cabinet
Unit: mm (inches)
About Trademarks
 Adobe Acrobat is a trademark of Adobe 
Systems Incorporated.
 Kensington is a registered trademark of 
Kensington Technology Group.
 Internet Explore is registered trademarks 
of Microsoft Corporation in the United 
States and/or other countries.
 PJLink is a registered trademark of Japan 
Business Machine and Information 
System Industries Association.
 AMX is a trademark of AMX Corporation.
 The terms HDMI and HDMI High-
Definition Multimedia Interface, and the 
HDMI Logo are trademarks or registered 
trademarks of HDMI Licensing LLC in 
the United States and other countries.
 Crestron RoomView is a trademark of 
Crestron Corporation.
 HDBaseT™ and the HDBaseT Alliance 
logo are trademarks of the HDBaseT 
Alliance.
 All other trademarks and registered 
trademarks are trademarks or registered 
trademarks of their respective holders. In 
this manual, 
™ and ® marks are not 
specified.
LensL’Typ e
VPLL-FM22 30.9 (1 
7/32)1
VPLL-ZM42 40.1 (1 
19/32)1
VPLL-ZM102 3.0 (
1/8)1
VPLL-Z4007 15.0 (
19/32)2
VPLL-4008 57.8 (2 
9/32)2
VPLL-Z4011 75.5 (2 
31/32)2
VPLL-Z4015 47.8 (1 
7/8)2
VPLL-Z4019 26.7 (1 
1/16)2
VPLL-Z4025 55.4 (2 
3/16)2
VPLL-Z4045 53.0 (2 
3/32)2
Front of the cabinet
Front of the lens 12