Sony Projector VPL-FHZ700L User Manual

4-544-271-13 (1)
© 2014 Sony Corporation
Data
Projector
Operating Instructions
Before operating the unit, please read this manual and supplied Quick Reference Manual 
thoroughly and retain it for future reference.
VPL-FHZ700L 

2Table of Contents
Table of Contents
Overview
Location and Function of Controls  .... 3
Main Unit  ..................................... 3
Terminals ...................................... 4
Remote Commander and Control 
Panel .......................................... 5
Preparation
Connecting the Projector  ................... 8
Connecting a Computer ................ 8
Connecting Video Equipment  ...... 9
Connecting an External 
Monitor ................................... 11
Connecting to HDBaseT™...

3Location and Function of Controls
Overview
BOverview
Location and Function of Controls
aLens (not supplied) (page 47)
bFront panel 
cAir filter cover (page 43)
dVentilation holes (intake)
eVentilation holes (exhaust)
Do not place anything near the ventilation 
holes as this may cause internal heat 
buildup. Do not place your hand near the 
ventilation holes (exhaust) and the 
circumference as this may cause injury.
fON/STANDBY indicator 
(page 39)
gWARNING indicator (page 39)
hControl panel (page 5)...

4Location and Function of Controls
Input (page 8)
aINPUT A
Video: RGB/YPBPR input terminal 
(RGB HD VD/YPBPR)
bINPUT B
Video: RGB input terminal (RGB)
cINPUT C
Video: DVI-D input terminal (DVI-D)
dINPUT D
Video: HDMI input terminal (HDMI)
eINPUT E
Video: Optional adaptor slot*
fS VIDEO (S VIDEO IN)
Video: S video input terminal
gVIDEO (VIDEO IN)
Video: Video input terminal
* Regarding attachable optional adaptor, 
consult with qualified Sony personnel.
Output (page 11)
hOUTPUT
Video: Monitor output...

5Location and Function of Controls
Overview
Remote Commander
Control Panel
aTurning on the power/Going to 
standby 
? (On) key
1 (Standby) key
bSelecting an input signal 
(page 14)
INPUT key (main unit)
Direct input select keys (Remote 
Commander)
The F key is not provided in this 
projector.
cOperating a menu (page 21)
ENTER /V/v/B/b (arrow) keys
MENU key
RETURN key
RESET key
dAdjusting the image (page 15)
FOCUS key
Use this key when attaching the power 
focus lens.
ZOOM key
Use this key when attaching...

6Location and Function of Controls
2Press the V/v/B/b keys to move the 
digital zoom icon to the point on the 
image  you wish to enlarge.
3Press the D ZOOM + key or the D 
ZOOM – key repeatedly to change the 
enlargement ratio. The image can be 
enlarged up to 4 times.
Press the RESET key to restore the 
previous image.
TWIN (Twin Picture) key
You can project the images from two 
input signals on the screen as a main 
picture and subpicture at the same time. 
To switch between one and two pictures,...

7Location and Function of Controls
Overview
Dimming
Standby Mode: Low
(go to step 6)
User: Sets each item of the energy-
saving mode menu as you desire 
(go to step 3).
3Select “User” then press the b key.
The setting items appear.
4Press the V/v key to select the ECO 
Mode item then press the b key or the 
ENTER key.
5Press the V/v key to select the setting 
value.
6Press the RETURN key to restore the 
previous image.
For details on ECO Mode settings, see 
“Light Output Mode”, “With No Input”, 
“With...

8Connecting the Projector
BPreparation
Connecting the Projector
 Turn off all equipment before making any connections.
 Use the proper cables for each connection.
 Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or 
cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.
 For more information, refer also to the instruction manuals of the equipment you are connecting.
Connection with a computer is explained for each...

9Connecting the Projector
Preparation
INPUT C
For connecting a computer with a DVI-D output terminal.
INPUT D
For connecting a computer with an HDMI output terminal.
 The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) Signal 
or CEC (Consumer Electronics Control) Signal.
 Be sure to use the HDMI cable with an HDMI logo.
Connections with a VHS videocassette recorder, DVD player, or BD player are explained for 
each input signal.
S VIDEO IN
For connecting video equipment...

10Connecting the Projector
VIDEO IN 
For connecting video equipment with a video output terminal.
INPUT A
For connection when there is a long distance between the video equipment and projector.
INPUT D
For connecting video equipment with an HDMI output terminal.
 The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) Signal 
or CEC (Consumer Electronics Control) Signal.
 Be sure to use the HDMI cable with an HDMI logo.
Notes
Video – BNC cable 
(not supplied) Video output...