Sony Projector VPL-FH500L VPL-FX500L User Manual
Have a look at the manual Sony Projector VPL-FH500L VPL-FX500L User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41Attaching/Removing the Projection Lens Others 4Align the connectors on the projector with those on the projection lens then insert the lens all the way in until it is securely in place. 5Tighten the four screws attached in step 3. 6Replace the front panel and fasten it with the four screws. A VPLL-FM22/ZM32/ZM42/ZM102: Removing the compensating glass Before attaching the projection lens to the projector, it is required to remove the compensating glass from the lens mounting part of the projector. To remove the compensating glass Turn the compensating glass counterclockwise as illustrated then pull it out towards you. To attach the compensating glass Insert the compensating glass with the arrow mark on the glass aligned with the mark (F) on the lens mounting part of the projector, and turn the glass clockwise. Connector section Connector section
42Attaching/Removing the Projection Lens B VPLL-FM21*1/ZM31*1/ZP41/ FM22/ZM32/ZM42/ZM101*1/ZM102: Attaching the projection lens adapter Before attaching the projection lens to the projector, it is required to attach the lens adapter to the projection lens. Insert the projection lens into the lens adapter as illustrated and fasten it with the four screws supplied with the lens adapter.For the VPLL-FM21* 1/ZM31*1/ZP41/ ZM101*1 Use the PK-F500LA1 lens adapter. PK-F500LA1 Slide until it clears the gap
43Attaching/Removing the Projection Lens Others When mounting a VPLL-ZP41 Engage the two connectors between the lens adapter and the projection lens, as illustrated.For the VPLL-FM22/ZM32/ZM42/ ZM102 Use the PK-F500LA2 lens adapter. PK-F500LA2 Slide until it clears the gap
44Attaching/Removing the Projection Lens C VPLL-ZM101*1: Attaching the shading sheet Before attaching the projection lens to the projector, it is required to attach the shading sheet supplied with the lens adapter after attaching the lens adapter. 1Remove the two screws from the lens adapter. 2Fit the shading sheet to the projection lens as illustrated and fasten it to the lens with the two screws. 1Loosen the four screws that secure the front panel (1), and remove the front panel, pulling it forward (2). 2Loosen the four screws that secure the projection lens then pull it out straight. When loosening the screws, support the lens with your hands so that it will not fall. If the lens was shifted with lens shift adjustment, the screws may be too constricted to loosened. In such a case, adjust to shift the lens to the center position (page 13). *1: VPL-FX500L only. Shading sheet Removing Note ScrewsScrews
45Installing the Optional Adapter Others Installing the Optional Adapter You can install the optional adapter in INPUT E of the connector panel section of the projector. 1Turn off the power of the projector and disconnect the power cable. 2Slide the slot cover for the optional adapter attached to the connector panel to the right and remove it. 3Insert the optional adapter as far as it goes. 4Tighten the two screws on the optional adapter. INPUT B RGB INPUT C DVI-D R/PRG/Y HD VD OUTPUT MONITOR INPUT D HDMI B/PBINPU T A Slot cover INPUT B RGB INPUT C DVI-D R/PRG/Y HD VD OUTPUT MONITOR INPUT D HDMI B/PBIN P U T A HDSDI/SDI INPUT ADAPTOR HDSDI/SDIAUDIO CHANNEL Example: BKM-FW16 HD-SDI/SDI Input Adaptor (not supplied) INPUT B RGB INPUT C DVI-D R/PRG/Y HD VD OUTPUT MONITOR INPUT D HDMI B/PBINPUT A HDSDI/SDI INPUT ADAPTOR HDSDI/SDIAUDIO CHANNEL
46Specifications Specifications ItemDescription Model nameVPL-FH500L/VPL-FX500L Display system 3 LCD system Display device Size of effective display areaVPL-FH500L: 0.95” (24.1 mm) × 3, Aspect ratio 16:10 VPL-FX500L: 0.99 (25.0 mm) × 3, Aspect ratio 4:3 Number of pixels VPL-FH500L: 6,912,000 pixels (1920 × 1200 × 3) pixels VPL-FX500L: 2,359,296 pixels (1024 × 768 × 3) pixels Light source High-pressure mercury lamp, 330 W type Light output 7000 lm *1 (when “Lamp Mode” is set to “High”) Displayable scanning frequency *2 Horizontal: 14 kHz to 93 kHz, Vertical: 47 Hz to 93 Hz Display resolution Computer signal inputtMaximum display resolution: 1920 × 1200 dots Panel display resolution: VPL-FH500L: 1920 × 1200 dots VPL-FX500L: 1024 × 768 dots Video signal inputNTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/ 50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p 1080/48i *3, 1080/24p*3, 1080/30p*3 Color system NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PA L 6 0 Computer and video signal input/ outputINPUT ARGB/YP BPR input connector: 5BNC female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75 ohms terminated, RGB/P BPR: 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: TTL level high impedance, positive/negative INPUT BRGB input connector: Mini D-sub 15-pin female, RGB: 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: TTL level high impedance, positive/negative INPUT CDVI-D input connector: DVI-D 24-pin (Single link), DVI 1.0 compliant, HDCP support INPUT D *3HDMI input connector: Digital RGB/YPBPR INPUT E*3HDSDI input connector*3: For an optional adapter S VIDEO INS video input connector: Mini DIN 4-pin, Y: 1 Vp-p ± 2 dB, sync negative, 75 ohms terminated, C: (burst signal) 0.286 (NTSC)/0.3 (PAL/SECAM) Vp-p ± 2 dB, 75 ohms terminated VIDEO INVideo input connector: BNC, 1 Vp-p ± 2 dB, sync negative, 75 ohms terminated
47Specifications Others Computer and video signal input/ outputOUTPUTMONITOR output connector: Mini D-sub 15-pin female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75 ohms terminated, RGB/P BPR: 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: HD, VD 4V (open), 1 Vp-p (75 ohms), positive/negative Control signal input/outputRS-232C connector: D-Sub 9 pin female LAN connector: RJ45, 10BASE-T/100BASE-TX CONTROL S input connector (DC power supply): Stereo mini jack, 5 Vp-p, Plug in power DC 5 V CONTROL S output connector: Stereo mini jack Operating temperature/ Operating humidity0 °C to 40 °C (32 °F to 104 °F)/35% to 85% (no condensation) Storage temperature/ Storage humidity–20 °C to +60 °C (–4 °F to +140 °F)/10 % to 90 % Power requirementsVPL-FH500L: 100 V to 240 V AC, 4.9 A to 2.0 A, 50/60 Hz VPL-FX500L: 100 V to 240 V AC, 4.8 A to 2.0 A, 50/60 Hz Power consumptionAC 100 V to 120 VVPL-FH500L: 490 W / VPL-FX500L: 480 W AC 220 V to 240 VVPL-FH500L: 460 W / VPL-FX500L: 460 W Standby mode power consumptionAC 100 V to 120 VVPL-FH500L: 11 W (when “Standby Mode” is set to “Standard”) / 0.1 W (when “Standby Mode” is set to “Low”) VPL-FX500L: 13 W (when “Standby Mode” is set to “Standard”) / 0.1 W (when “Standby Mode” is set to “Low”) AC 220 V to 240 VVPL-FH500L: 10 W (when “ Standby Mode” is set to “Standard”) / 0.2 W (when “Standby Mode” is set to “Low”) VPL-FX500L: 12 W (when “ Standby Mode” is set to “Standard”) / 0.2 W (when “Standby Mode” is set to “Low”) Heat dissipation AC 100 V to 120 VVPL-FH500L: 1672 BTU / VPL-FX500L: 1638 BTU AC 220 V to 240 VVPL-FH500L: 1569 BTU / VPL-FX500L: 1569 BTU Outside dimensions530 × 213 × 545 mm (20 7/8 × 83/8 × 2115/32) (W/H/ D) 530 × 204 × 545 mm (20 7/8 × 81/32 × 2115/32) (W/H/ D) (without protrusions) Mass *820 kg (44 lb 1 oz) ItemDescription Model nameVPL-FH500L/VPL-FX500L
48Specifications Supplied accessoriesSee “Checking the Supplied Accessories” in the supplied Quick Reference Manual. Optional accessories *4 *5Projector Lamp LMP-F330 (for replacement) Projector Suspension Support PSS-630 Projector Suspension Support Joint Pole PSS-630P Projection Lens VPLL-FM22 *6: Manual focus, Projected image size: 40 to 300 (1.02 m to 7.62 m), Maximum external dimensions (W × H × D): 88 × 88 × 169 mm (3 15/32 × 3 15/32 × 6 21/32), Mass: 950 g (2 lb 2 oz) Projection Lens VPLL-ZM32 *6: Manual focus/zoom, Projected image size: 40 to 300 (1.02 m to 7.62 m), Maximum external dimensions (W × H × D): 88 × 88 × 159 mm (3 15/32 × 315/32 × 61/4), Mass: 1,000 g (2 lb 3oz) Projection Lens VPLL-ZM42 *6: Manual focus/zoom, Projected image size: 40 to 300 (1.02 m to 7.62 m), Maximum external dimensions (W × H × D): 88 × 88 × 159 mm (3 15/32 × 3 15/32 × 61/4), Mass: 650 g (1 lb 7 oz) Projection Lens VPLL-ZP41 *7: Electric focus/zoom, Projected image size: 40 to 300 (1.02 m to 7.62 m), Maximum external dimensions (W × H × D): 117 × 110 × 198 mm (4 19/32 × 411/32 × 725/32), Mass: 1,460 g (3 lb 3 oz) Projection Lens VPLL-ZM102 *6: Manual focus/zoom, Projected image size: 40 to 300 (1.02 m to 7.62 m), Maximum external dimensions (W × H × D): 88 × 88 × 198 mm (3 15/32 × 3 15/32 × 725/32), Mass: 1,500 g (3 lb 5 oz) Projection Lens VPLL-ZM101 *7 *8: Manual focus/ zoom, Projected image size: 40 to 300 (1.02 m to 7.62 m), Maximum external dimensions (W × H × D): 100 × 100 × 222 mm (3 15/16 × 3 15/16 × 8 3/4), Mass: 1,810 g (3 lb 16 oz) Projection Lens VPLL-4008: Manual focus, Projected image size: 40 to 600 (1.02 m to 15.24 m), Maximum external dimensions (W × H × D): 148 × 133 × 240 mm (5 13/16 × 5 1/4 × 9 7/16), Mass: 2,550 g (5 lb 10 oz) Projection Lens VPLL-Z4015: Electric focus/zoom, Projected image size: 40 to 600 (1.02 m to 15.24 m), Maximum external dimensions (W × H × D): 148 × 133 × 231 mm (5 13/16 × 5 1/4 × 93/32), Mass: 3,000 g (6 lb 10 oz) ItemDescription Model nameVPL-FH500L/VPL-FX500L
49Specifications Others The values for mass and dimensions are approximate. *1: When attaching the VPLL-ZP41. *2: For details, refer to “Acceptable Input Signals” on page 51. *3: Available for VPL-FH500L only *4: Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer. *5: Information on accessories in this manual are current as of May 2010. *6: To attach the projection lens to the projector, the PK-F500LA2 projection lens adapter is required. *7: To attach the projection lens to the projector, the PK-F500LA1 projection lens adapter is required. *8: Available for VPL-FX500L only. Design and specifications of the unit, including the optional accessories, are subject to change without notice.Optional accessories *4 *5Projection Lens VPLL-Z4019: Electric focus/zoom, Projected image size: 40 to 600 (1.02 m to 15.24 m), Maximum external dimensions (W × H × D): 148 × 133 × 212 mm (5 13/16 × 5 1/4 × 811/32), Mass: 3,060 g (6 lb 12 oz) Projection Lens VPLL-Z4025: Electric focus/zoom, Projected image size: 40 to 600 (1.02 m to 15.24 m), Maximum external dimensions (W × H × D): 148 × 133 × 243 mm (5 13/16 × 51/4 × 99/16), Mass: 2,800 g (6 lb 3oz) Projection Lens VPLL-Z4045: Electric focus/zoom, Projected image size: 60 to 600 (1.52 m to 15.24 m), Maximum external dimensions (W × H × D): 148 × 133 × 235 mm (5 13/16 × 51/4 × 9 1/4), Mass: 3,000 g (6 lb 10 oz) Projection Lens Adapter PK-F500LA1 Projection Lens Adapter PK-F500LA2 HD-SDI/SDI Input Adaptor BKM-FW16 *3 ItemDescription Model nameVPL-FH500L/VPL-FX500L Notes Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
50Specifications Pin assignment DVI-D connector (DVI-D, female) RGB input connector (Mini D-sub 15- pin, female) RS-232C connector (D-Sub 9-pin, female) 1 T.M.D.S. Data2–14 +5 V Power 2 T.M.D.S. Data2+15 Ground (return for +5 V) 3 T.M.D.S. Data2 Shield16 Hot Plug Detect 4 NC 17 T.M.D.S Data0– 5 NC 18 T.M.D.S Data0+ 6 DDC Clock 19 T.M.D.S Data0 Shield 7 DDC Data 20 NC 8NC 21NC 9 T.M.D.S. Data1–22 T.M.D.S Clock Shield 10 T.M.D.S. Data1+23 T.M.D.S Clock+ 11 T.M.D.S. Data1 Shield24 T.M.D.S Clock– 12 NC 13 NC 18 16 9 17 24 1 Video input (red) R9Power supply input for DDC 2 Video input (green) G10 GND 3Video input (blue) B11 GND 4 GND 12 DDC/SDA 5 RESERVE 13 Horizontal sync signal 6 GND (R) 14 Vertical sync signal 7 GND (G) 15 DDC/SCL 8 GND (B) 1NC 6NC 2RXDA 7RTS 3TXDA 8CTS 4DTR 9NC 5 GND 51 9 6