Sony Projector VPL FH35/FH30 User Manual

21The Screen Menu
Adjustments and Settings Using a Menu
VPL-FX35/FX30
*1:  If you select “Normal,” the image is 
projected in the same resolution as the 
input signal without changing the aspect 
ratio of the original image.
*2: If you select “Full2,” the image is projected 
to fit the projected image size, regardless 
of the aspect ratio of the image.
*3: Depending on the input signal, the 
projected image may be projected as 
illustrated below. In this a case, select 
“16:9.”
*4: Depending on the input...

22The Function Menu
The Function Menu
The Function menu is used for setting various functions of the projector.
*1: Executes APA when a computer signal is input via the RGB input connector (INPUT A, INPUT 
B). Setting items Description
Audio Output Vol. The higher the setting, the higher an audio level output from the audio 
output connector. The lower the setting, the lower the audio level.
Smart APAOn/Off; When set to “On,” executes APA automatically when a signal is 
input.
*1
CC...

23The Operation Menu
Adjustments and Settings Using a Menu
The Operation Menu
The Operation Menu is used for setting for the operations by using the menu or the Remote 
Commander.
*1: Available for VPL-FH35/FH30 only
*2: You will not be able to use the projector if you forget your password. If you call qualified Sony 
personnel because you have forgotten the password, you will be asked to verify the projector’s 
serial number and your identity. (This process may differ in other countries/regions.) Once...

24The Connection/Power Menu
The Connection/Power Menu
The Connection/Power menu is used for setting for the connections and power.
*1: The image may not be adjusted properly depending on the type of input signal. In such a case, 
adjust it manually to suit to the connected equipment.
*2: When “Standby Mode” is set to “Low,” the network and network control function cannot be 
operated while the projector is in standby mode. Setting items Description
Network Setting
IP Address SetupAu to  ( D H C P ): The...

25The Installation Menu
Adjustments and Settings Using a Menu
The Installation Menu
The Installation menu is used for installing the projector.
*1: Do not use the projector at an altitude of 2,700 m or higher.
*2: Available for VPL-FH35/FH30 only
*3: Depending on the position adjusted with the lens shift feature, the aspect ratio of the image may 
change from the original or projected image may be distorted with Keystone adjustment.
*4: Since the Keystone adjustment is an electronic correction, the image...

26The Information Menu
The Information Menu
The Information menu enables you to confirm various information on the projector, such as the 
total usage hours of a lamp.
*1: These items may not be displayed depending on the input signal.Items Description
Model Name Displays the model name.
Serial No. Displays the serial number.
fH / fV (horizontal 
frequency/vertical 
frequency)
*1
Displays the horizontal frequency/vertical frequency/signal type of the 
current input signal.
Lamp Timer Indicates the total...

27Using Network Features
Network
BNetwork
Using Network Features
Connection to the network allows you to operate the following features:
 Checking the current status of the projector via a Web browser.
 Remotely controlling the projector via a Web browser.
 Receiving the e-mail report for the projector.
 Making the network settings for the projector.
 Supports network monitoring and control protocol (Advertisement, PJ Talk, PJ Link, SNMP, 
AMX DDDP [Dynamic Device Discovery Protocol]).
 The menu displays...

28Using Network Features
How to operate the Control window
Switching the page
Click one of the Page Switching buttons to 
display the desired setting page.
Setting the access limitation
You can limit a user for accessing any 
particular page.
Administrator: Allowed access to all 
pages
User: Allowed access to all pages except 
the Setup page
Set under [Password] of the Setup page.
When you access the Setup page for the first 
time, enter “root” for user name and enter 
nothing for password.
The name of...

29Using Network Features
Network
1Click on [Owner information] to enter 
the owner information recorded in the 
e-
mail report.
2Set the timing of the e-mail report.
Click on [Mail Report] to open the Mail 
Report page.
Lamp Reminder (Lamp1): Set the 
timing for lamp replacement. To reset 
Lamp Reminder, execute “Lamp 
Timer Reset” on the projector 
(page 22).
Maintenance Reminder: Set the timing 
for maintenance. To reset 
Maintenance Reminder, check the 
RESET check box and then click on 
[Apply]....

30Indicators
BOthers
Indicators
The indicators allow checking the status and notify you of abnormal operation of the projector.
If the projector exhibits abnormal status, address the problem in accordance with the table 
below.
ON/STANDBY indicator
LAMP/COVER indicator
StatusMeaning/Remedies
Lights in red The projector is in Standby mode.
Flashes in green  The projector is ready to operate after having been turned on. 
 The lamp cools after the projector is turned off.
Lights in green The projector’s...