Sony Projector VPL-EW348 User Manual

41Using Network Features
Network
(b) Input the settings for Client 
Mode.
When the USB wireless LAN module is 
activated as a client, set the items for the 
client (set the items for the access point 
the projector tries to connect to).
Connection Status: Displays the 
connecting status between the access 
point and projector.
SSID: Input the SSID of access point the 
projector tries to connect to.
Encryption Type: Select the security 
method of access point the projector 
tries to connect to from the...

42Using Network Features
Change the label names for the input 
terminals that will be displayed on the 
projected screen on the Set up page. The 
entered label names will not be applied 
unless you click on [Apply].
1Click on [Advanced Menu] to open 
the Setup page.
2Click on the [Input Label] and open 
the Input label setting window.
Clear the check box for the label that 
you want to change and input the label 
name. You can input up to 20 of the 
following letters.
Alphabets: a to z, A to Z
Numbers: 0...

43Using Network Features
Network
1Click on [Advanced Menu] to display 
the buttons for more settings.
2(a)Set Advertisement.
Start Advertisement Service: 
Set Advertisement to enabled or 
disabled. Items for Advertisement are 
enabled only when this function is 
enabled. The function is disabled at the 
factory default.
-Community: 
Input the community name for 
Advertisement and PJ Talk. If the 
community name for Advertisement is 
changed, the one for PJ Talk will also be 
changed. Only four...

44Using Network Features
avoid unnecessary access to the 
projector from other computers.
-Port No.:
Input the server port of PJ Talk. The 
factory default setting is “53484.”
-Timeout:
Input the time until PJ Talk 
communication is terminated in the case 
that it is disconnected. The factory 
default setting is “30.”
-Host Address:
Input the IP address that the PJ Talk 
server is allowed to receive. If no IP 
address is input, receiving commands 
will be allowed from any IP address. 
From the moment the...

45Using Network Features
Network
(e)Reset the network settings.
Reset:
Reset all Web browser settings to their 
factory defaults.
Reset button Reset 

46Using Presentation Function via Network
BPresentation Function via Network
Using Presentation Function via Network
The Presentation Function via Network enables you to do the following:
 Connect a maximum of eight computers to the projector.
 Project images from a maximum of four computers simultaneously.
 Connecting a USB wireless LAN module (not supplied) to the projector as an access point, 
allows the projector to connect to up to seven computers simultaneously.
Presentation Function via Network...

47Using Presentation Function via Network
Presentation Function via Network
3Start Projector Station for Network 
Presentation.
For Windows:
Select [Start]-[All Programs]-[Projector 
Station for Network Presentation] on the 
computer.
For Mac:
Double-click [Projector Station for 
Network Presentation] in Applications 
folder.
When you start Projector Station for 
Network Presentation for the first time after 
installing to your computer, the connection 
guidance window will be displayed. This 
window...

48Using Presentation Function via Network
b)  For AP Mode
Refer to the network information on the 
projected screen of the projector that you 
want the computer connect to, and input 
the SSID and the Connection CODE. If 
“CODE” is “----”, “Connection CODE” 
is set to “Off.” The computer can 
connect without inputting “CODE”. If 
the wireless password is set for the SSID 
(“Setting the WLAN Network of the 
projector” on page 39), the wireless 
password input window will be 
displayed while the computer...

49Using Presentation Function via Network
Presentation Function via Network
For Windows:
For Mac:
Projector Station for Network Presentation 
allows you to create a shortcut that registers 
the connection setting.
By starting the application with the shortcut, 
you can project the image to the registered 
projector.
1Create a file.
For Windows
Create a shortcut to the 
NetworkPresentation.exe. Copy the 
shortcut to the Projector Station for 
Network Presentation, or right-click the...

50Using Presentation Function via Network
2Register the connection setting.
For Windows
Register the settings. Right-click the 
created shortcut and select “Properties” 
from the pop up menu.
Input the settings of the projector that 
you want the computer to connect to in 
“Target” from the “Shortcut” tab and 
save. For the format for the settings, 
refer to the command formats in the 
option format.
For Mac
Input the settings of the projector that 
you want the computer to connect to in 
the created...