Sony Projector VPL-EW130 User Manual

11Projecting an Image
Projecting/Adjusting an Image
BProjecting/Adjusting an Image
Projecting an Image
The size of a projected image depends on the distance between the projector and screen. Install 
the projector so that the projected image fits the screen size. For details on projection distances 
and projected image sizes, see 
“Projection Distance” (page 34).
1Plug the AC power cord into the wall 
outlet.
2Connect all equipment to the projector 
(page 7).
3Press ?/1 to turn on the unit.
4Turn on the...

12Projecting an Image
Adjusting the tilt of the projector with the adjusters
You can adjust the height of the projector 
using the adjusters.
By changing the slope of the projector with 
adjusters, you can adjust the position of the 
projected image.
 Be careful not to let the projector down on your fingers.
 Do not push hard on the top of the projector with the adjuster extended. It may cause malfunction.
Adjusting the Projected image
Focus Size (Zoom) Position
Adjuster adjustment button
Notes 

13Projecting an Image
Projecting/Adjusting an Image
Changing the aspect ratio of the projected image
Press ASPECT on the remote commander to change the aspect ratio of the projected image. 
You can also change the setting in Aspect of the INPUT SETTING menu (page 17, page 18).
Correcting trapezoidal distortion of the projected image (Keystone feature) 
Keystone feature may not work automatically when the screen is tilted. In this case, set 
keystone manually.
1Press KEYSTONE on the remote 
commander or...

14Projecting an Image
1Press the ?/1 key on the main unit or the Remote Commander.
The message appears. Press it again according to the message.
2Unplug the AC power cord from the wall outlet.
After step 1, the fan continues to run for a while to reduce internal heat, however, you may 
also unplug the AC power cord before the fan stops.
To clear the confirmation message
The message disappears if you press any key other than the ?/1 key on the main unit or the 
Remote Commander, or if you do not press any...

15Using a MENU
Adjustments and Settings Using a Menu
BAdjustments and Settings Using a Menu
Using a MENU
The menu displays used for the explanation below may be different depending on the model you are 
using.
1Press the MENU key to display the 
menu.
2Select the setting menu. 
Use the V or v key to select the setting 
menu then press b or ENTER key.
3Select the setting item.
Use the V or v key to select the setting 
menu then press b or ENTER 
key.
To return to the selection screen of the 
setting menu,...

16The PICTURE SETTING Menu
The PICTURE SETTING Menu
For adjusting the picture for each input signal.
*1: When a computer signal is input, this option is available.
*2: When a video signal is input, this option is available.
*3: When “Picture Mode” is set to the item other than “Presentation,” this option is available.
*4: When a B & W signal is input, this option is not available.
*5: When an analog TV signal is input, this option may not available, depending on the color system.
*6: When a progressive...

17The INPUT SETTING Menu
Adjustments and Settings Using a Menu
The INPUT SETTING Menu
For adjusting the size, position, and aspect ratio of the projected image for each input signal.
*1: Available when a computer signal is input from the RGB input connector (INPUT A).
*2: Available when a computer signal is input from the RGB input connector (INPUT A) or a video 
signal is input from the YP
BPR input connector (INPUT A).
*3:   Note that if the projector is used for profit or for public viewing, modifying...

18The INPUT SETTING Menu
Aspect
*1:  If you select “Normal,” the image is 
projected in the same resolution as the 
input signal without changing the aspect 
ratio of the original image.
*2: If you select “Full2,” the image is projected 
to fit the projected image size, regardless 
of the aspect ratio of the image.
*3: If you adjust the projected image position 
using an image with 16:9 aspect ratio and 
then switch the input source to 4:3 image, 
the top and bottom edge of the image may 
be hidden. In...

19The SET SETTING Menu
Adjustments and Settings Using a Menu
The SET SETTING Menu
The SET SETTING menu is used for setting various functions of the projector.
*1: Executes APA when a computer signal is input via the RGB input connector (INPUT A).
*2: If the projected image includes large amount of black portion around it, the APA function will 
not work properly and a part of the image may not be displayed on the screen and also optimum 
image cannot be obtained, depending on the type of input signal. In...

20The MENU SETTING Menu
The MENU SETTING Menu
The MENU SETTING menu is used for setting for the operations by using the menu or the 
Remote Commander.
Items Item descriptions
StatusOn: All on-screen statuses are enabled.
Off: Turn off the on-screen displays except for the menus, message when 
turning off the power, and warning messages.
Language Selects the language used in the menu and on-screen displays.
Menu PositionTop Left/Bottom Left/Center/Top Right/Bottom Right: Selects the display 
position of...