Sony Pmv F5 Manual
Have a look at the manual Sony Pmv F5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Setup Menu List81 Settings MarkerSetting the marker indicationsSetting All / VF / SDI/HDMI / OffTurns all marker indications on the viewfinder on/off. Color White / Yellow / Cyan / Green / Magenta / Red / BlueSets the marker color. Center Marker 1 / 2 / 3 / 4 / OffSelects the center marker type when displaying the center marker. Select “Off” to turn off the center marker. Safety Zone On / OffTurns the safety zone marker on/off. Safety Area 80% / 90% / 92.5% / 95%Selects the size (ratio to the entire screen) of the safety zone marker. Aspect Marker Line / Mask / OffSelects the aspect marker. Line: To show white lines Mask: To lower the video signal level of areas outside the marker range. Off: To not display. Aspect Select 4:3 / 13:9 / 14:9 / 15:9 / 16:9 / 17:9 / 1.66:1 / 1.85:1 / 2.35:1 / 2.4:1Select the ratio of the aspect marker. Aspect Mask 0 to 15 (12)When “Aspect Marker” is set to “Mask,” select the brightness of images outside the aspect marker. Aspect Safety Zone On / OffTurns the aspect safety zone marker on/off. Aspect Safety Area 80% / 90% / 92.5% / 95%Selects the size (ratio to the entire screen) of the aspect safety zone marker. User Box On / OffTurns the box cursor indication on/off. User Box Width 3 to 479 (240)Sets the width of the rectangle for the user box. User Box Height 3 to 269 (135)Sets the height of the rectangle for the user box. User Box H Position –476 to 476 (0)Sets the horizontal position of the user box. User Box V Position –266 to 266 (0)Sets the vertical position of the user box. 100% Marker On / OffTurns 100% marker on/off. ZebraSetting the zebra patternSetting On / OffTurns the zebra function on/off. Zebra Select 1 / 2 / BothSelect the zebra pattern(s) (Zebra 1, Zebra 2, or both of Zebra 1 and Zebra 2) to be displayed. Zebra1 Level 50% to 107% (70%)Sets the display level of zebra 1. Zebra1 Aperture Level 1% to 20% (10%)Sets the aperture level of zebra 1. Zebra2 Level 52% to 109% (100%)Sets the display level of zebra 2. VF Menu itemsSub items and setting valuesContents
Setup Menu List82 Settings Display On/OffSelecting the items to be displayedSetting On / OffTurns all the indications of the viewfinder GUI on/off. Shutter Setting On / OffSelects the item to be displayed on the viewfinder. Notes “Video Signal Monitor” is available only when the HD signal can be output from SDI (Sub), “4K/2K to HD Conv.” in “Output Setting” of the Video menu is set to “Letter Box,” and “Aspect” in “VF Setting” of the VF menu is set to “Auto” or “Full.” For the Waveform display of Video Signal Monitor, there is the scale at 0%, 25%, 50%, 75%, and 100% of the video level. Video Signal Monitor is not displayed on the viewfinder when outputting a video signal that is different from the signal of SDI (Sub) to the viewfinder. ND Filter Position On / Off Gain Setting On / Off Rec/Play Status On / Off Color Temp. On / Off Frame Rate / Interval On / Off Battery Remain On / Off Timecode On / Off Audio Level Meter On / Off Media Status On / Off Focus Position Meter / Feet / Off Iris Position On / Off Zoom Position On / Off AE Mode On / Off White Balance Mode On / Off SDI Rec Control On / Off Rec Format On / Off Gamma On / Off Timecode Lock On / Off Wi-Fi Condition On / Off Video Signal Monitor Off / Waveform / Vector / Histogram Clip Name On / Off Focus Assist Indicator On / Off VF Menu itemsSub items and setting valuesContents
Setup Menu List83 Settings Focus Area Marker On / Off Clip Number On / Off Notice Message On / Off WRR RF Level On / Off VF Menu itemsSub items and setting valuesContents TC/UB Menu TC/UB Menu itemsSub items and setting valuesContents TimecodeSetting the timecodeMode Preset (Ext-Lk) / Int Regen Selects the timecode mode. Preset: To start the timecode from the specified value Regen (regeneration): To start the timecode by continuing the timecode of the previous clip. Run Rec Run / Free RunRec Run: To advance the timecode during recording only. Free Run: The timecode keeps advancing regardless of the state of recording. Setting Sets the timecode to a desired value. SET: Sets the value. Reset Execute / CancelResets the timecode to 00:00:00:00. Execute: Execute this function. TC Format DF / NDFSelects the timecode format. DF: Drop frame NDF: Non drop frame TC DisplaySetting the time data indicationDisplay Select Timecode / DurationSwitches the time data indication.
Setup Menu List84 Settings Recording Menu Recording Menu itemsSub items and setting valuesContents Interval RecSetting the Interval Rec functionSetting On / OffTurns the Interval Rec function on/off. Interval Time 1 to 10 / 15 / 20 / 30 / 40 / 50 sec 1 to 10 / 15 / 20 / 30 / 40 / 50 min1 / 2 / 3 / 4 / 6 / 12 / 24 hourSets the interval for Interval Rec. Number of Frames Specifies the number of frames to record in one Interval Rec take. When “Format” in “Rec Format” of the System menu is set to XAVC 50P or 59.94P: 2 / 6 / 12 frames When “Format” in “Rec Format” of the System menu is set to XAVC 23.98P, 24P, 25P, 29.97P, 50i, or 59.94i: 1 / 3 / 6 / 9 frames Picture Cach e Rec Setting the Picture Cache Rec functionSetting On / OffTurns the Picture Cache Rec function on/off. (This setting is available only when “Main Operation” in “Base Setting” of the System menu is set to “YPbPr” or “RGB.”) Cache Rec Time 0-2sec / 2-4sec / 4-6sec / 6-8sec / 8-10sec / 13-15secSets the accumulated time to the picture cache memory (going back time when starting cache rec). (This setting is locked to “0-2sec” when “Format” in “Rec Format” of the System menu is set to “XAVC 4096 × 2160P”/ XAVC 3840 × 2160P.” “8-10sec” and “13-15sec” cannot be selected when “Format” in “Rec Format” of the System menu is set to “XAVC 2048 × 1080P”/“XAVC 1920 × 1080P.”) MPEG2 ProxySetting the MPEG2 proxy functionSetting On / OffTurns the MPEG2 proxy function on/off. (PMW-F55: This setting is available only when “Frequency” in “System Setting” of the System menu is set to “29.97”/“25”/“23.98” and “Format” in “Rec Format” of the System menu is set to “XAVC 4096 × 2160P”/“XAVC 3840 × 2160P,” or “Frequency” in “System Setting” of the System menu is set to “29.97” and “Format” in “Rec Format” of the System menu is set to “SStP SR-SQ 444”/“SStP SR-SQ 422.” PMW-F5 + CBKZ-55FX: This setting is available only when “Frequency” in “System Setting” of the System menu is set to “29.97”/“25”/“23.98” and “Format” in “Rec Format” of the System menu is set to “XAVC 4096 × 2160P”/“XAVC 3840 × 2160P.”) Rec ControlSetting the recording control functionSetting SxS & AXS / AXSSelects the recording target (only external recording (AXS memory), or both external recording (AXS memory) and recording to an SxS memory card in the camcorder) when “Main Operation” in “Base Setting” of the System menu is set to “RAW.” Note Recording is not performed if the AXS memory disables recording even if “SxS & AXS” is set. SDI Rec Control Setting the SDI recording control functionSetting Off / OnTurns on/off this function that controls recording/stop recording of the external device by the SDI output signal.
Setup Menu List85 Settings This menu is not available when the media is not loaded. Media Menu Media Menu itemsSub items and setting valuesContents Update MediaUpdating a memoryMedia (A) Execute / CancelUpdates the managerial file on the SxS memory card in the slot A. Execute: Updates the file. Media (B) Execute / CancelUpdates the managerial file on the SxS memory card in the slot B. Execute: Updates the file. AXS Memory Execute / CancelUpdates the managerial file on the AXS memory card. Execute: Updates the file. Format MediaFormatting a memoryMedia (A) Execute / CancelFormats the SxS memory card in the slot A. Execute: Executes format. Media (B) Execute / CancelFormats the SxS memory card in the slot B. Execute: Executes format. SD card Execute / CancelFormats the SD card. Execute: Executes format. AXS Memory Execute / CancelFormats the AXS memory card. Execute: Executes format. Clip NamingSetting for the clip nameMode Cam ID + Reel# / TitleSets the naming mode for the clip name. Cam ID + Reel#: Camera ID + Reel Number + Shot Number + date + random string Title: Any string that is set in “Title Prefix” + clip number Camera ID A to ZSets the camera ID when “Mode” is set to “Cam ID + Reel#.” Reel Number 001 to 999Sets the numeric portion of the Reel Number when “Mode” is set to “Cam ID + Reel#.” Camera Position C / L / RSets the first character part of the Shot Number when “Mode” is set to “Cam ID + Reel#.” Title Prefix Sets the title part of the clip name when “Mode” is set to “Title.” (Default setting is the unique ID for the model. Unique ID for the model: Lower three digits of the serial number.) (Input characters on the character input screen (page 56). Number Set 0001 to 9999Sets the number part of the clip name when “Mode” is set to “Title.”
Setup Menu List86 Settings File Menu File Menu itemsSub items and setting valuesContents All FileSetting for the All fileLoad SD Card Loads the All file from the SD card that is inserted into the SD card slot. Save SD card Stores the All file onto the SD card that is inserted into the SD card slot. File ID Names the All file. Scene FileSetting for the Scene file (This setting is available only when “Shooting Mode” in “Base Setting” of the System menu is set to “Custom.”)Recall Internal Memory Loads the Scene file from the internal memory. Store Internal Memory Stores the Scene file on the internal memory. Load SD Card Loads the file from the sub memory card. Save SD Card Stores the file on the sub memory card. File ID Names the Scene file. User Menu Item Setting for the User Menu Item fileLoad SD Card Loads the User Menu Item file from the SD card that is inserted into the SD card slot. Save SD Card Stores the User Menu Item file onto the SD card that is inserted into the SD card slot. File ID Names the User Menu Item file. User GammaSetting for user gamma fileCurrent Settings Displays the name of the current user gamma file on the internal memory. Load SD Card Loads the gamma table data (user gamma file) on an SD card that is made by user, to the internal memory. When using the user gamma file that is created on CvpFileEditorTM V4.2, store the file on the following directory of an SD card. PRIVATE\SONY\PRO\CAMERA\HD_CAM Reset 1 / 2 / 3 / 4 / 5 / All Default value 1: 709 (800%) 2: S-Log2 3: 709 (800%) 4: 709 (800%) 5: 709 (800%)Resets the user gamma file on the internal memory to the default value. 1 to 5: Selected file All: All files Monitor LUTSetting for monitor LUT fileCurrent Settings Displays 6 user LUT names that are registered in the internal memory. Load SD card 1 / 2 / 3 / 4 / 5 / 6Loads the LUT data that is created by user on an SD card (user LUT file) to the internal memory. The user LUT file that is created on RAW Viewer is stored on the following directory of an SD card. PRIVATE\SONY\PRO\CAMERA\PMWF55_F5 Reset 1 / 2 / 3 / 4 / 5 / 6 / AllResets the user LUT data in the internal memory to the default value of “709(800%).” 1 to 6: Selected file All: All data
Setup Menu List87 Settings Monitor 3D LUT Setting for monitor 3D LUT file Current Settings Displays the current user Monitor 3D LUT name in the internal memory. Load SD card 1 / 2 / 3 / 4Loads the 3D LUT data that is created by the user on an SD card (user 3D LUT file) to the internal memory. The camcorder can import the CUBE file (*.cube) of 17 or 33 lattices that is created by RAW Viewer or BMD’s Da Vinci Resolve*. * Checked on Resolve V9.0 and V10.0. When creating the CUBE file, set “Input” to “S- Gamut3.Cine/S-Log3” and “Format” to “Resolve” (when creating by RAW Viewer). Store the created user 3D LUT file on the following directory of an SD card. PRIVATE\SONY\PRO\CAMERA\PMWF55_F5 Reset 1 / 2 / 3 / 4 / AllResets the user 3D LUT data in the internal memory to the default value of “LC-709.” 1 to 4: Selected file All: All data File Menu itemsSub items and setting valuesContents
Setup Menu List88 Settings Lens FileSetting for the lens file (This setting is available only when “Shooting Mode” in “Base Setting” of the System menu is set to “Custom.”)Recall Internal Memory Loads the lens file from the internal memory. Store Internal Memory Stores the lens file on the internal memory. Load SD Card Loads the lens file from the sub memory card. Save SD Card Stores the lens file on the sub memory card. File ID Names the lens file. File Source Displays the selected file number. Clear Lens Offset Execute / CancelClear the lens file. Execute: Execute clearing. Lens Auto Recall Off / On (Lens Name) / On (Serial Number)Sets whether to load the corresponding lens file automatically when the lens can be specified by lens communication. Note This function is available only when supplying power to the lens. (This function is not available after attaching/detaching the lens during supplying power to the lens.) Lens Serial Number Displays the serial number of the lens that is attached to the camcorder, for lenses compatible with lens communication. Lens Name Displays the lens model name when it can be obtained by lens communication. Lens Manufacturer Displays the lens manufacturer name when it can be obtained by lens communication. Lens Center H –40 to +40 (±0)Sets the horizontal position of the center marker to the lens file. Lens Center V –40 to +40 (±0)Sets the vertical position of the center marker to the lens file. Flare R –99 to +99 (±0)Sets the user adjusting value of the R flare correction that is caused by the lens to the lens file. Flare G –99 to +99 (±0)Sets the user adjusting value of the G flare correction that is caused by the lens to the lens file. Flare B –99 to +99 (±0)Sets the user adjusting value of the B flare correction that is caused by the lens to the lens file. White Offset R –99 to +99 (±0)Sets the R ch correction value of the white balance offset by lens to the lens file. White Offset B –99 to +99 (±0)Sets the B ch correction value of the white balance offset by lens to the lens file. Shading Ch Select Red / Green / BlueSelects the channel for the white shading correction that is caused by the lens. Shading H SAW –99 to +99 (±0)Sets the Saw white shading correction value (caused by the lens) of the selected channel by “Shading Ch Select” and horizontal direction to the lens file. Shading H PARA –99 to +99 (±0)Sets the Para white shading correction value (caused by the lens) of the selected channel by “Shading Ch Select” and horizontal direction to the lens file. Shading V SAW –99 to +99 (±0)Sets the Saw white shading correction value (caused by the lens) of the selected channel by “Shading Ch Select” and vertical direction to the lens file. Shading V PARA –99 to +99 (±0)Sets the Para white shading correction value (caused by the lens) of the selected channel by “Shading Ch Select” and vertical direction to the lens file. File Menu itemsSub items and setting valuesContents
Setup Menu List89 Settings Maintenance Menu Maintenance Menu itemsSub items and setting valuesContents APRExecuting APRAPR Execute / CancelExecutes APR (Auto Pixel Restoration: auto adjusting of the image sensor). Test SawSetting the test signal outputSetting On / OffTurns the test signal on/off. Camera ConfigDetail settings for the cameraRM Common Memory On / OffSets whether to share the settings of when connecting the remote control unit and using the camcorder alone. Note This item cannot be selected when connecting the remote control unit. HD/2K Modulation High / LowSets the video resolution of the HD/2K signal that is converted from the 4K/QFHD signal. High: High resolution that focuses details Low: Resolution equivalent to a conventional HD camera (such as F35, PMW-F3, etc.) Note This setting is for the HD/2K recording signal or HD/2K output signal when shooting while “Imager Scan Mode” is set to “Normal,” or the HD/2K output signal when playing the clip of XAVC 4096 × 2160/XAVC 3840 × 2160 or AXS memory (this setting is also applied to the viewfinder output signal).
Setup Menu List90 Settings System Menu System Menu itemsSub items and setting valuesContents System SettingFrequency 59.94 / 50 / 29.97 / 25 / 24 / 23.98Selects the system frequency. Base SettingShooting Mode Custom / Cine EISelects the shooting mode. Main Operation YPbPr / RGB / RAWSets the operation mode for recording mainly. (When “Shooting Mode” in “Base Setting” of the System menu is set to “Custom,” “YPbPr” or “RGB” can be selected.) Color Space S-Gamut/SLog2 / S-Gamut3.Cine/SLog3 / S-Gamut3/SLog3 / MatrixSets the color space. (When “Shooting Mode” in “Base Setting” of the System menu is set to “Custom,” “Matrix” can be selected. When “Shooting Mode” in “Base Setting” of the System menu is set to “Cine EI,” “S-Gamut/SLog2,” “S-Gamut3.Cine/SLog3,” or “S-Gamut3/SLog3” can be selected.) Imager Scan Mode Normal / 2K Full / 2K CenterSets the reading mode of the imager. Normal: Shoots with 4K Super 35 mm size for normal recording. Shoots with 2K size for frame rate that is faster than 60P. 2K Full: Shoots with 2K Super 35 mm size. 2K Center: Shoots with the size equivalent to the Super 16 mm (center area of Super 35 mm).