Sony Pmv F5 Manual

Setup Menu List71
Settings
Skin DetailAdjusting the skin 
detail 
compensationSetting
On / OffTurns the skin detail compensation function on/off.
Area Detection
Execute/CancelDetects the color for the skin detail compensation.
Execute: Executes this function.
Area Indication
On / OffTurn on/off the function that displays the zebra pattern in the 
target area for the skin detail compensation.
Level
–99 to +99 (±0)Adjusts the skin detail level.
Saturation
–99 to +99 (±0)Adjusts the color (saturation) level...

Setup Menu List72
Settings
Multi MatrixSettings for the 
multi-matrix 
correctionSetting
On / OffTurns on/off the multi-matrix correction, which allows 
specific colors to be selected for saturation correction in a 16-
axis hue space.
Area Indication
On / OffDisplays a zebra pattern in the areas of the specified color for 
multi-matrix correction.
Color Detection
Execute/CancelDetects the target color on the screen for multi-matrix 
correction.
Execute: Executes this function.
Axis
B / B+  /MG- / MG /...

Setup Menu List73
Settings
Audio Menu
Audio
 Menu itemsSub items and setting valuesContents
Audio InputSetting for audio 
inputs
Note
This item cannot 
be selected when 
removing the 
audio connector 
panel.Front MIC Select
(Only when the CBK-55BK is 
attached)
Mono / StereoSelects the front microphone sound from either monaural and 
stereo.
Rear XLR Auto
(Only when the CBK-55BK is 
attached)
On / OffTurn on/off the function that detects audio cable connection 
for the AUDIO IN connector on the rear of...

Setup Menu List74
Settings
Limiter Mode
Off / –6dB / – 9dB / –12dB / 
–15dB / –17dBSelects the limiter level when a loud signal is input while 
setting audio input level manually.
When you do not use the limiter, select “Off.”
1KHz Tone on Color Bars
On / OffTurn the 1-kHz reference tone signal on/off.
CH-1 Wind Filter
On / OffTurn the wind filter for the channel 1 on/off.
CH-2 Wind Filter
On / OffTurn the wind filter for the channel 2 on/off.
CH-3 Wind Filter
(Only when the CBK-55BK is 
attached)
On /...

Setup Menu List75
Settings
Audio CH4 Level
(Only when the CBK-55BK is 
attached)
Side4 / Front / Front+Side4Select the knob for adjusting the audio level of sound 
recorded to channel 4.
Side4: LEVEL CH-4 knob on the audio operating section
Front: MIC LEVEL knob on the operating section (front)
Front+Side4: LEVEL CH-4 knob and MIC LEVEL knob 
(interlocked) 
Audio LevelSetting for audio 
recording level
Notes
 This item cannot 
be selected when 
removing the 
audio connector 
panel.
 The recording 
level...

Setup Menu List76
Settings
Reference Out
(Only when the CBK-55BK is 
attached)
+4dB / 0dB / –3dB / EBULSets the output level for the reference input level of the LIVE 
AUDIO OUT connector on the CBK-55BK.
WRR SettingSetting related to 
the wireless 
receiver
(Only when the 
CBK-55BK is 
attached)WRR Valid CH Sel
All / CH1Selects whether to enable channels 1 and 2 of the wireless 
receiver (“All”) or channel 1 only (“CH1”).
All: Enables channels 1 and 2.
CH1: Enables channel 1 only. (Select when using as...

Setup Menu List77
Settings
Video Menu
Vi de o
Menu itemsSub items and setting valuesContents
Output On/OffSetting the video 
outputSDI (Sub)
On / OffTurns the SDI (Sub) output on/off.
HDMI
On / OffTurns the HDMI output on/off.
Output FormatSetting for the 
output formatSDI (Main) Selects the SDI (Main) output format.
The setting value differs, depending on the settings of 
“Frequency” in “System Setting” and “Rec Format” of the 
System menu (page 101).
SDI (Sub) Selects the SDI (sub) output format.
The...

Setup Menu List78
Settings
Monitor LUTSetting for the 
monitor LUTCategory
LUT / Look Profile / 
User 3D LUTSelects the type of Look for Monitor LUT.
LUT: Outputs images using Preset LUT or User LUT.
Look Profile: Outputs images that are suited for the start point 
of color grading or images that are close to print quality by 
selecting the Look number.
User 3D LUT: Outputs images using User 3D LUT. (This 
setting is available only when “Color Space” in “Base 
Setting” of the System menu is set to...

Setup Menu List79
Settings
SDI (Sub) & HDMI
MLUT On / MLUT OffSelects whether to apply Monitor LUT to the image that is 
output from SDI (Sub) and HDMI.
(This setting is in accord with the “SDI (Main) & Internal 
Rec” setting, while the S&Q Motion or viewfinder double 
speed drive function is activated, or during RAW playback.*)
* This setting for the HDMI output follows the “SDI (Main) & 
Internal Rec” setting when the SDI output format is set to 
4K/QFHD and the HDMI output is set to 2K/HD. This...

Setup Menu List80
Settings
When there is a button or dial that corresponds to the menu item on the attached viewfinder, that item is 
not available.
VF Menu
VF
 Menu itemsSub items and setting valuesContents
VF SettingSetting the 
viewfinderColor
–99 to +99 (±0)Adjusts the color of pictures on the viewfinder.
Contrast
–99 to +99 (±0)Adjusts the contrast of pictures on the viewfinder.
Brightness
–99 to +99 (±0)Adjusts the brightness of pictures on the viewfinder.
Color Mode
Color / B&WSelects the display...